Axe Drawing Tutorial - How to draw Axe step by step

1. Create a Cartoon Axe Step by Step

Today, drawing123.com will guide you how to easily draw an axe with simple steps.

Let’s get started!

Step 1: The Head Base

Start by drawing an incomplete rectangle tilted at an angle. Use three straight lines to create the top and sides of the axe head, leaving the bottom part open for the blade.

Step 2: The Blade Profile

From the open ends of the rectangle, draw two outward-curving lines. Connect them at the bottom with a long, sweeping curve to form the sharp edge of the axe.

Step 3: Defining the Edge

Draw a curved line inside the blade area, parallel to the bottom edge. This creates the “bevel” or the sharpened part of the metal head.

Step 4: The Handle

Draw a long, sturdy handle extending from the bottom of the axe head. The handle should be slightly wider at the base (the grip) with a small “hook” or curve at the end to prevent it from slipping out of a hand.

Step 5: The Eye/Top of the Handle

Draw a small, rounded “U” shape poking out of the top of the axe head. This represents the top of the wooden handle (the wedge) passing through the metal head.

Step 6: Coloring

Finish your drawing by adding color. Use red for the main part of the axe head, light gray for the sharpened edge, and brown for the wooden handle.

2. From Handle to Blade: Drawing an Axe

Step 1: Draw the Basic Handle Shape

Start by drawing a long, slightly curved rectangular shape titled at an angle. This will serve as the main body of the wooden handle. Round off the corners to make it look smooth.

Step 2: Add Detail to the Base

At the bottom end of the handle, draw a small oval or curved line to close the shape. This gives the handle a three-dimensional, cylindrical look at the base.

Step 3: Start the Back of the Axe Head

Beginning from the top of the handle, draw a curved line extending upward. This line represents the back (the poll) and the top part of the axe head.

Step 4: Outline the Top and Bottom of the Head

Draw two more curved lines extending to the right. One should go from the top of the previous line, and another should start from the middle of the handle, curving downward to form the underside of the axe head.

Step 5: Draw the Cutting Edge

Connect the top and bottom lines with a long, outward-curving vertical line. This creates the sharp “bit” or the blade of the axe.

Step 6: Add Internal Detail Lines

Draw a curved line near the blade to indicate the bevel (the sharpened edge). Then, add another curved line where the handle meets the head to show how the wood is fitted into the metal.

Step 7: Color and Shade

Paint the handle brown with a darker shade at the base for depth. Use light gray for the main body of the axe head. Use a darker gray for the socket area and white/very light gray for the sharpened edge to make it look metallic and sharp.

2. Let’s Draw an Axe with Simple Shapes

Step 1: The Front Curve

Start by drawing a long, vertical S-shaped curve. This will serve as the leading edge (the cutting face) of the axe head.

Step 2: The Top Edge

From the top tip of your first curve, draw a slightly curved line extending to the right. This forms the top profile of the axe head.

Step 3: The Inner Blade and Bevel

Draw a diagonal line starting from the end of the top edge, slanting back down towards the center. Then, add a second curved line parallel to the front edge to create the look of a sharpened bevel.

Step 4: The Bottom Notch

Connect the bottom of the bevel line to the front curve using a sharp “V” or zigzag notch. This gives the axe head its unique, aggressive shape.

Step 5: The Poll (Back of the Axe)

On the upper left side of the axe head, draw a small rectangular cap with rounded corners. This is called the “poll” or the butt of the axe.

Step 6: The Handle (Haft)

Draw two long, parallel lines extending diagonally downward from the axe head. Connect them at the bottom with a smooth, rounded curve to finish the handle.

Step 7: Coloring

Finally, add color to your drawing to make it pop:

– Blue/Grey: For the main body of the metal head.

– Light Grey/Silver: For the sharpened cutting edge.

– Brown: For the wooden handle and the poll.

4. Cool Axe Drawing Lesson for Young Artists

Step 1: Draw the Basic Blade Shape

Start by drawing a curved, four-sided shape to form the main body of the axe head. The left side should be a wide outward curve, while the right side curves inward where it will eventually meet the handle.

Step 2: Add the Bevel Line

Draw a curved line inside the left edge of the blade. This represents the “bevel” or the sharpened edge of the axe.

Step 3: Outline the Eye (Socket)

Draw a rectangular shape with slightly rounded corners on the right side of the blade. This is the “eye” of the axe head where the wooden handle will be inserted.

Step 4: Add the Pin/Bolt

Inside the upper part of the rectangular socket, draw a small circle. This represents the pin or bolt that secures the head to the handle.

Step 5: Draw the Top of the Handle

Add a small, rounded rectangular cap protruding from the top of the metal socket. This shows the top of the wooden handle (the “haft”) sticking out.

Step 6: Sketch the Full Handle

Draw the long, slightly curved body of the handle extending downwards from the metal head. Make sure the bottom (the “butt” of the axe) is rounded off.

Step 7: Add the Grip Detail

Near the bottom of the handle, draw several crisscrossing diagonal lines. This creates the appearance of a textured grip or leather wrapping for better handling.

Step 8: Color the Drawing

Finally, add color to bring your drawing to life. Use shades of grey or silver for the metal axe head, a light brown/orange for the wooden handle, and a darker brown for the grip wraps.

5. A Kid-Friendly Guide to Sketching an Axe

Step 1: The Cutting Edge

Start by drawing a simple curved line on the left side of your paper. This represents the sharp outer edge (the bit) of the axe head.

Step 2: The Top and Bottom of the Head

From the top of your curved line, draw a long horizontal line sloping slightly upward to the right. Then, draw a short diagonal line extending from the bottom of the curve to begin the lower part of the head.

Step 3: Shaping the Throat and Poll

Connect the lines from Step 2 by drawing a wavy, indented line along the bottom to create the “throat” of the axe. Close the shape on the right side with a vertical line to form the “poll” (the butt of the axe).

Step 4: Adding the Blade Detail and Eye

Draw a curved vertical line just behind the front edge to define the bevel (the sharpened part of the blade). On the back end (the poll), add a small rectangular shape to give it more dimension.

Step 5: The Top Wedge

At the very top of the axe head, draw a small trapezoid shape. This represents the top of the wooden handle (the haft) or the wedge that secures the head to the handle.

Step 6: Drawing the Handle

Draw the long, curved handle (haft) extending downwards from the head. Notice the ergonomic “S” curve – it starts wider where it meets the metal and curves inward before flaring out at the bottom (the grip).

Step 7: The Lanyard Hole

Near the very bottom of the handle (the knob), draw a small circle. This is the hole used for hanging the axe or attaching a wrist strap.

Step 8: Coloring

Finally, add color to your drawing. Use red for the main body of the axe head, grey for the sharpened edge and top wedge, and yellow (or brown for wood) for the handle.

6. Turn Lines and Curves into an Axe Drawing

Step 1: Draw the Handle

Start by drawing the outline of the handle. It should be a long, slightly curved vertical shape. Make the bottom part (the grip) wider and rounded to give it an ergonomic look.

Step 2: Add the Top Curve

At the very top of the handle, draw a sharp, curved hook extending to the left. This will form the bottom edge of the axe head where it meets the wood.

Step 3: Outline the Axe Head

Draw the top and back of the axe head. Connect the top of the handle to the front tip with a long, slightly dipped horizontal line, and close the shape with a straight vertical line at the back.

Step 4: Draw the Blade Edge

Add the cutting edge of the axe. Draw a curved line at the front, including a small “V” shaped notch in the middle to give it a rugged, well-used appearance.

Step 5: Add the Top Detail

Draw a small rectangular cap on top of the axe head. This represents the part of the handle (the wedge) poking through the eye of the axe.

Step 6: Create the Grip Section

Draw a curved horizontal line across the middle of the handle. This divides the bare wood section from the lower grip area. Also, add a small curved line at the very bottom tip.

Step 7: Add Wood Grain Texture

Inside the upper section of the handle, draw several wavy, diagonal lines. This creates a realistic wood grain texture.

Step 8: Add the Lanyard Hole

At the bottom of the handle (the pommel), draw a small circle with a dot inside. This represents the hole used for hanging the axe or attaching a strap.