You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a baby bottle with simple steps.
Let’s get started!
Step 1: Draw the Collar Base
Start by drawing a diagonal rounded rectangle. This will serve as the ring or “collar” that connects the nipple to the bottle.
Step 2: Add Grip Details
Inside the rectangle you just drew, add five small, vertical oval shapes. These represent the texture or grip on the bottle’s cap.
Step 3: Draw the Nipple
On the top side of the collar, draw a bell-like curve with a rounded tip. This forms the silicone nipple of the baby bottle.
Step 4: Sketch the Bottle Body
Extend two long, parallel lines downward from the collar, then connect them at the bottom with a wide, rounded U-shape to create the main body of the bottle.
Step 5: Define the Liquid Level
Inside the bottle, draw a thin, horizontal oval (an ellipse). This represents the surface of the milk or water inside.
Step 6: Outline the Liquid Volume
Draw a line that follows the inner curve of the bottle’s bottom, connecting to the edges of the ellipse you drew in the previous step. This outlines the actual liquid sitting at the bottom.
Step 7: Color Your Drawing
Finally, add color to bring it to life! Use blue for the collar, yellow for the nipple, a very light blue for the glass/plastic, and white for the milk inside.
Step 1: Draw the Nipple
Start by drawing the nipple (teat) of the bottle. Use a continuous curved line to create a small rounded bulb at the top that flows into a wider, bell-shaped base.
Step 2: Add the Top of the Cap
Underneath the nipple, draw a wide, curved oval shape. This represents the top surface of the screw-on ring that holds the nipple in place.
Step 3: Complete the Screw-on Cap
Give the cap some depth by drawing two short vertical lines down from the ends of the oval and connecting them with another curved line. This creates a thick, cylindrical ring shape.
Step 4: Outline the Bottle Body
Draw the main body of the bottle. Start from the edges of the cap and draw two long, slightly curved lines downward, then connect them at the bottom with a large, smooth curve. The bottle should look slightly tilted.
Step 5: Add the Measurement Marks
Inside the bottle body, draw a vertical row of small, rounded rectangles (pills shapes). These represent the measurement scale (graduations) used to check the liquid level.
Step 6: Color Your Drawing
Finally, add some color to bring it to life! Color the nipple yellow, the cap red, fill the bottle body and measurement marks with a light blue shade to suggest it is made of glass or plastic and filled with liquid.
Step 1:
Start by drawing a rounded rectangle in the upper-middle section of your page. This will serve as the main part of the bottle’s screw-on cap.
Step 2:
Add a very thin, flat oval (or a slightly curved line) directly on top of the first rectangle. This forms the rim where the nipple will be attached.
Step 3:
Draw the nipple (teat) on top. Start with a wide base and curve it upward into a smaller bulb shape at the peak.
Step 4:
Draw the body of the bottle. Create a large, tall rectangle with very rounded corners. It should be wider than the cap and connect to the bottom of the screw-on ring.
Step 5:
Add the measurement markings. On the right side of the bottle, draw a vertical row of small, thin ovals or dashes to represent the volume scale.
Step 6:
Add reflective highlights to give the bottle a glass or plastic look. Draw a curved “comma” shape near the top left and a long, thin vertical oval down the left side.
Step 7:
Draw a wide horizontal oval across the middle of the bottle’s body. This represents the surface level of the liquid (milk or water) inside.
Step 8:
Finally, color your drawing. Use blue for the cap, a light skin tone for the nipple, and a very light blue or white for the liquid. Add some light shading to the top of the bottle to give it dimension.
Step 1: Draw the Collar Base
Start by drawing a horizontal rectangle with slightly rounded corners. This will serve as the lower part of the bottle’s screw-on ring (the collar).
Step 2: Add the Upper Collar
On top of the first rectangle, draw a flatter, slightly narrower rounded shape. This completes the plastic ring that holds the nipple in place.
Step 3: Draw the Nipple
Using a curved line, draw the nipple sitting on top of the collar. It should have a wide base that tapers into a small, rounded bulb at the very top.
Step 4: Outline the Bottle Body
From the bottom of the collar, draw two wavy vertical lines that curve inward and then outward to create a “waist” for easy gripping. Connect them at the bottom with a wide, rounded curve to finish the bottle’s body.
Step 5: Draw the Eyes
Inside the body of the bottle, draw two large vertical ovals. Inside each oval, add a smaller “C” shape or a crescent to represent the pupils, giving the bottle a friendly character look.
Step 6: Add a Smile
Just below the eyes, draw a simple, wide u-shaped curve. This creates a happy, smiling face for your character.
Step 7: Color the Illustration
Finally, bring your drawing to life with color!
– Orange for the nipple.
– Green for the collar.
– Light Blue for the bottle (to represent milk or juice).
– Black to fill in the pupils.
Step 1: Draw the bottle collar
Start by drawing a horizontal, rounded rectangle in the upper center of your page. This will serve as the main ring or collar that holds the nipple in place.
Step 2: Add the top rim
Draw a smaller, thinner rectangle sitting right on top of the first one. This creates the upper lip of the collar where the nipple attaches.
Step 3: Draw the nipple
Starting from the top rim, draw a bulbous shape that narrows in the middle and rounds out at the top. It should look like a bell or a small dome with a “neck.”
Step 4: Draw the bottle body
From the bottom of the collar, draw two long, slightly curved lines extending downward. Join them at the bottom with a wide, “U” shaped curve to create the base of the bottle.
Step 5: Add the liquid level (Surface)
Inside the bottle body, draw a thin, horizontal oval. This represents the top surface of the milk or water inside the bottle.
Step 6: Define the liquid volume
Draw a line that follows the inner contour of the bottle, starting from the edges of the oval you just drew and curving around the bottom. This gives the liquid a 3D appearance inside the glass or plastic.
Step 7: Color your drawing
Finally, add color to bring it to life! In the example, the bottle and nipple are colored light pink, the collar is a darker pink, and the liquid inside is white to represent milk.
Step 1: The Collar Base
Start by drawing a horizontal rectangle with rounded corners. This will serve as the collar (the part that holds the nipple to the bottle). Use a bright color like red for your initial guide lines.
Step 2: Adding Texture
Inside the rounded rectangle, draw a series of small, vertical oval shapes. These represent the “grips” or ridges on the plastic ring, giving the bottle a realistic texture.
Step 3: Drawing the Nipple
On top of the collar, draw the nipple. It should look like a small dome with a narrower, rounded tip at the very top. Ensure it is centered and sits firmly on the base you created in Step 1.
Step 4: The Bottle Body
From the bottom of the collar, draw two long, slightly curved vertical lines. Connect them at the bottom with a curved horizontal line to create the base. This forms the main body of the bottle, which should be slightly wider than the collar.
Step 5: Measurement Markings
On the right side of the bottle body, add the volume indicators. Draw a vertical row of small, horizontal dashes or ovals. These represent the fluid ounce or milliliter markings used for feeding.
Step 6: Decorative Details
Add a personal touch by drawing a heart shape (or any logo you like) in the center of the bottle. In this example, a double-lined heart is used to make the design pop.
Step 7: Coloring
Finalize your drawing by adding color! You can use a pastel blue for the bottle body, a soft pink for the collar and heart, and a natural tan or cream color for the rubber nipple.
Hopefully, this drawing tutorial on Baby Bottle will help you easily create a nice drawing.
