Banana Tree Drawing Tutorial - How to draw Banana Tree step by step

1. A Fun Nature Drawing: Banana Tree for Kids

Today, drawing123.com will guide you how to easily draw a banana tree with simple steps.

Let’s get started!

Step 1: Draw the First Two Leaves

Start by drawing two curved, crescent-like shapes on the right side. These will be the foundation of the tree’s canopy. The shapes should taper to a point at the ends, resembling large, drooping leaves.

Step 2: Add Top Leaves

Continue the canopy by drawing two more large leaves extending upwards and to the right. Make the topmost leaf the largest to create a sense of height and volume.

Step 3: Complete the Left Canopy

Balance the drawing by adding two similar leaf shapes on the left side. All the leaves should converge toward a single central point at the bottom, creating a “fan” effect.

Step 4: Draw the Bunch of Bananas

Just below the center where the leaves meet, draw a cluster of small, rounded U-shaped fingers. These represent a bunch of bananas hanging from the heart of the tree.

Step 5: Add the Main Trunk

Draw two long, slightly curved parallel lines starting from the base of the bananas and extending downwards. Connect them at the bottom with a flat or slightly curved line to form a sturdy, leaning trunk.

Step 6: Color Your Drawing

The final step is to bring your tree to life! Use a vibrant green for the large leaves, a bright yellow for the bunch of bananas, and a warm brown for the trunk.

2. Creating a Banana Tree with Big Leaves

Step 1: Draw the First Two Leaves

Start by drawing two large, oblong shapes that meet at a center point. These shapes should look like wings or broad leaves with slightly wavy bottom edges to represent the texture of banana leaves.

Step 2: Add Midribs to the First Leaves

Inside the two leaves you just drew, add a single curved line running through the center of each. These are the midribs (the central veins) of the leaves.

Step 3: Draw Two Upward Leaves

Above the first two leaves, draw another pair of similar leaf shapes pointing upwards. Make sure they also connect to the same central point.

Step 4: Add Midribs to the Upward Leaves

Just like in Step 2, draw a curved line through the middle of the two new upward-pointing leaves to give them more detail.

Step 5: Draw the Bottom Leaves

Complete the foliage by drawing two more leaves pointing downwards and outwards. Your tree should now have a total of six large leaves spreading out in a fan shape.

Step 6: Add Midribs to the Bottom Leaves

Draw the final midrib lines inside the bottom two leaves. Now the crown of the banana tree is fully outlined.

Step 7: Draw the Banana Bunch

Right at the center where all the leaves meet, draw a small cluster of oval shapes. These represent a bunch of bananas hanging from the tree.

Step 8: Draw the Trunk

Draw two long, slightly curved vertical lines extending downwards from the center of the leaves. The trunk should be slightly wider at the bottom than at the top.

Step 9: Add the Ground Line

At the base of the trunk, draw a wide, horizontal curve to represent the ground or a small hill where the tree is planted.

Step 10: Color Your Drawing

Finish your masterpiece by adding color! Use vibrant green for the leaves, bright yellow for the bananas, and a warm brown for the tree trunk.

3. Turn Simple Shapes into a Banana Tree Picture

Step 1: Draw the Trunk

Start by drawing two long, slightly curved vertical lines that taper inward toward the top. Connect them at the bottom with a small curve to create a solid base for the trunk.

Step 2: Add the First Leaf

From the top of the trunk, draw a long, curved line extending to the right. Create the banana leaf shape around it, making sure to add a few “V” shaped notches to give it a natural, frayed look.

Step 3: Add the Second Leaf

Repeat the process on the left side. Draw a curved stem extending outward and finish the leaf shape with jagged edges at the bottom.

Step 4: Draw an Upward Leaf

Add a third leaf growing diagonally upward to the right. This adds height and dimension to the crown of the tree.

Step 5: Add a Back-Left Leaf

Draw another large leaf pointing diagonally upward to the left. At this stage, your tree should have four main leaves fanning out in different directions.

Step 6: Fill the Center

To make the tree look fuller, draw a smaller leaf pointing straight up in the middle of the crown. This fills the gap between the taller side leaves.

Step 7: Sketch the Fruit Stem

Just below where the leaves meet the trunk, draw two small, curved parallel lines pointing downward. This will serve as the stem for the bunch of bananas.

Step 8: Draw the Banana Bunch

At the end of the small stem, draw several curved, finger-like shapes clustered together to create a bunch of bananas.

Step 9: Color the Drawing

Finally, bring your illustration to life! Use a dark green for the trunk, a lighter green for the leaves, and a bright yellow for the bananas.

4. Easy Banana Tree Drawing Lesson for Young Artists

Step 1: The Base

Draw a flattened semi-circle or an oval shape at the bottom. This will serve as the mound of dirt or the ground where the tree is planted.

Step 2: Starting the Trunk

Draw two short vertical lines coming up from the center of the base. Connect them with a slanted line to start the bottom segment of the trunk.

Step 3: Extending the Trunk

Add a second, taller segment on top of the first one. Make it slightly narrower to show the tree tapering upward. Again, use a slanted line to separate the segments.

Step 4: The Top of the Trunk

Draw a final, thin vertical rectangle with a rounded top. This completes the main stem of the banana tree.

Step 5: The First Large Leaf

Starting from the top of the trunk, draw a long, curved arching line to the left. Add a jagged, “zigzag” bottom edge to give it that characteristic frayed banana leaf look.

Step 6: The Second Leaf

Repeat the process on the right side. Draw a similar curved leaf arching downward to create symmetry in your drawing.

Step 7: Adding Height

Draw a third leaf starting from the very top of the trunk, arching high to the left above the first leaf. This adds volume to the canopy.

Step 8: Filling the Right Side

Add a fourth leaf arching to the right, sitting above the second leaf. Your tree should now have a full, balanced set of leaves.

Step 9: The Center Leaf

Draw one last leaf pointing straight up or slightly tilted. This leaf is often narrower and represents the newest growth at the heart of the tree.

Step 10: Coloring

Finish your drawing by adding color. Use vibrant green for the leaves, a dark brown for the trunk, and a lighter tan or yellowish-brown for the ground base.

5. From Trunk to Fruit: Drawing a Banana Tree

Step 1: The Base of the Trunk

Start by drawing the bottom section of the trunk. Use slightly curved vertical lines and overlapping “V” shapes at the bottom to create the look of peeling bark or leaf bases near the ground.

Step 2: Extending the Trunk

Draw a long, tapered shape extending upward from the base. This forms the main body of the banana tree’s “pseudostem.” It should be narrower at the top than at the bottom.

Step 3: The Fruit Stem

Draw a curved “hook” shape coming out from the top of the trunk. This represents the thick stem (peduncle) that will hold the bunch of bananas.

Step 4: The First Hand of Bananas

At the end of the curved stem, draw a group of oval shapes clustered together. These represent the first “hand” or row of bananas.

Step 5: The Second Hand of Bananas

Add a second layer of oval shapes directly below the first one. This gives the banana bunch more volume and a realistic appearance.

Step 6: Completing the Bunch

Add a few more small curved lines at the very bottom of the cluster to represent the final small bananas at the tip of the bunch.

Step 7: The First Leaf

Starting from the top of the trunk, draw a large, arching leaf pointing to the left. Give the edges a “jagged” or “torn” look, which is a signature characteristic of banana leaves.

Step 8: The Top Leaf

Draw a second large leaf pointing straight up or slightly tilted. Add a central line (the midrib) through the middle of the leaf to give it structure.