You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a barrel with simple steps.
Let’s get started!
Step 1: Draw the Top Opening
Draw a horizontal ellipse at the top to serve as the top rim or opening of the barrel.
Step 2: Add the Curved Sides
Draw two long, outward-curving lines extending downwards from both side edges of the top ellipse to form the bulged sides of the barrel.
Step 3: Complete the Bottom Base
Connect the bottom ends of the two curved sides with a downward-sloping curve to form the base of the barrel.
Step 4: Outline the Outer Metal Hoops
Add two curved horizontal lines across the body: one near the top and one near the bottom, parallel to the curvature of the barrel’s top and bottom.
Step 5: Draw the Inner Metal Hoops
Add two more curved horizontal lines parallel to the previous ones to create two full metallic bands (hoops) around the barrel.
Step 6: Add the Wooden Stave Lines
Draw vertical curved lines across the sections separated by the hoops to represent individual wooden staves that make up the body.
Step 7: Color the Barrel
Color the wooden body and top face with shades of light and dark brown. Color the metal hoops (bands around the barrel) in dark metallic gray.
Step 1: Draw the Top Rim
Draw two concentric, slightly flattened horizontal ovals near the top of the canvas to create the top lip of the barrel.
Step 2: Add the Small Cap
Draw a small cylinder with a flat oval top inside the right side of the inner oval to serve as the barrel’s cap or bung.
Step 3: Form the Upper Section
Extend two straight vertical lines downwards from the sides of the top rim, and connect them at the bottom with a curved line matching the arc of the top rim.
Step 4: Add the First Molded Ring Rim
Draw a curved line underneath the bottom of the upper section to form the lower edge of the upper raised ridge.
Step 5: Draw the Middle Section
Extend two vertical lines down from the upper ridge and connect them at the bottom with another parallel curved line to create the middle section of the barrel.
Step 6: Add the Second Molded Ring Rim
Add a curved line beneath the middle section to create the lower raised ridge.
Step 7: Form the Bottom Section
Extend two vertical lines down from the second ridge and connect them at the bottom with a parallel curved line to complete the main body of the barrel.
Step 8: Add the Base Rim
Draw one last curved line right beneath the bottom line to form the lower edge of the bottom base rim.
Step 9: Draw the Radiation Symbol
In the center of the middle section, draw a double-ring circle containing a central dot and three fan blade shapes extending outward to create the biohazard/radiation symbol.
Step 10: Color the Barrel
Color the main body of the barrel in bright blue. Fill the top rim, raised middle ridges, bottom rim, and the radiation symbol with dark charcoal gray. Color the small top cap silver-gray with a white top surface.
Step 1: Start with Two Arcs
Begin by drawing two matching, vertically oriented arcs, facing each other. These will form the curved sides of the barrel.
Step 2: Define the Shape
Connect the top ends of the arcs and the bottom ends of the arcs with two parallel, horizontal lines. Then, draw two trapezoid-like shapes, one on top of the structure and one below, to define the top and bottom rims of the barrel.
Step 3: Add Hoop Details
Inside each horizontal rectangular section (the middle bands), draw a row of four small circles. These represent the rivets or bolts holding the metal hoops in place.
Step 4: Close the Ends
Draw a short, vertical line at each corner to completely connect and enclose the top and bottom trapezoid-like sections. This solidifies the barrel’s head and foot hoops.
Step 5: Detail the End Planks
Add vertical, slightly splayed lines to the top and bottom surfaces of the barrel. These lines simulate the wooden staves of the barrel’s flat ends.
Step 6: Add Body Staves
Draw vertical, slightly curved lines within the main body of the barrel (between the middle hoops). These lines should follow the outward curve of the barrel’s sides, defining the main body staves.
Step 7: Apply Final Colors
For the final drawing, color the wooden body (staves and ends) with a uniform brown tone. Color the metal hoops (the top, middle, and bottom bands) and the small circular rivets with a neutral grey color.
Step 1: Draw the Top Rim
Start near the top by drawing two concentric, slightly flattened ovals to form the top lip and rim of the barrel.
Step 2: Draw the First Upper Ridge
Directly below the top rim, draw a thin, downward-curving, closed loop shape that stretches across the width of the barrel.
Step 3: Draw the Upper Lower Ridge
Further down, draw a similar downward-curving, thin closed loop shape that will mark the top edge of the bottom section.
Step 4: Draw the Bottom Rim
Below the lower ridge, draw one more thin, downward-curving, closed loop shape to form the base rim of the barrel.
Step 5: Connect the Vertical Body
Connect the parts with four vertical lines: two short lines connecting the top rim to the first upper ridge, two long lines connecting the upper ridge to the lower ridge, and two short lines connecting the lower ridge to the bottom rim.
Step 6: Add the Pouring Cap
Inside the top oval surface, draw a small oval near the upper-left side to represent the cap or bung hole.
Step 7: Write the Text
In the middle section of the barrel body, draw the letters “OIL” in block, hollow text.
Step 8: Apply the Final Colors
Color the main body and top inner surface of the barrel a mustard yellow tone. Color all the raised ridges, the top outer rim, the bottom base rim, the cap, and the text “OIL” a dark grey color.
Step 1: Draw the Outer Oval Rim
Start near the top of your drawing area by sketching a wide, flattened horizontal oval. This will serve as the outer boundary for the top rim of the barrel.
Step 2: Add the Inner Oval Rim
Directly inside the first shape, draw a slightly smaller oval that follows the same curve. This creates the border thickness for the top rim.
Step 3: Divide the Rim Segments
Add short straight lines between the inner and outer ovals all the way around the rim to mark the individual wooden staves.
Step 4: Define the Liquid Level
Draw a smooth, upward-curving arc across the interior of the inner oval to establish the surface line of the water inside.
Step 5: Outline the Barrel Body
From the outer edges of the top rim, draw two curved vertical lines that bulge outward toward the middle. Connect them at the bottom with a smooth horizontal curve to form the main shape of the barrel.
Step 6: Add the Metal Hoops
Draw two horizontal bands across the body—one set near the top and another near the bottom. Each band consists of two parallel curved lines matching the curve of the base.
Step 7: Draw the Wooden Stave Seams
Add narrow, double vertical lines running down the length of the barrel body, aligned with the rim dividers. Pass through each section except over the horizontal bands to give the body its wooden plank appearance.
Step 8: Color the Completed Barrel
Finish the drawing by applying colors:
– Wooden Body & Rim Top: Bright orange for the outer staves and top rim face.
– Stave Seams & Inner Wall: Dark brown for the line gaps between staves and the inner rim wall.
– Metal Hoops: Smooth gray for the top and bottom bands.
– Liquid Surface: Bright blue for the water inside the barrel.
Step 1: Create the Inner Top Oval
Begin by drawing a flat, horizontally oriented oval in the upper center of your drawing area. This forms the boundary for the center hole on the top of the barrel.
Step 2: Add the Top Ring and Thickness
Draw a second, slightly larger horizontal oval centered on the first one. This creates the top ring of the barrel. Then, add three lines inside the very center oval to give it a sense of three-dimensional depth and thickness.
Step 3: Define the Main Barrel Shape
Starting from the outer left and right edges of the top ring, draw two large, smooth, outward-bowing curves that swell in the middle and curve back inward at the bottom. Connect these two vertical curves at the bottom with a simple curved line. This forms the large, classic “bulged” shape of the barrel body.
Step 4: Draw the Top Hoop
Draw a wide horizontal band around the upper portion of the barrel body, just below the top ring. Ensure the top and bottom edges of the band curve parallel to the barrel’s overall curves.
Step 5: Draw the Middle Hoop
Add a second wide horizontal band around the center, which is the widest part of the barrel body. Like the first, its top and bottom edges should be curved.
Step 6: Draw the Bottom Hoop
Draw a third and final wide horizontal band near the bottom of the barrel, positioned symmetrically with the top band relative to the center.
Step 7: Add the Wooden Staves
Draw vertical lines along the entire height of the barrel, from the top ring all the way down to the bottom edge. These lines should curve outward to follow the barrel’s contours, dividing the large body into individual wooden planks, known as staves. The lines should pass through and be visible over the horizontal hoops.
Step 8: Final Coloring
Fill the top surface around the center hole with a lighter shade of brown. The main barrel body and all of the wooden staves should be colored a standard, warm medium brown. To make them stand out, color all three of the horizontal metal hoops—top, middle, and bottom—a bright, clean yellow.
Hopefully, this drawing tutorial on Barrel will help you easily create a nice drawing.
