You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a bathtub with simple steps.
Let’s get started!
Step 1: Draw the Rim
Start by drawing a long, thin horizontal rectangle with rounded corners. This will serve as the top rim of the bathtub.
Step 2: Form the Tub Body
Underneath the rim, draw a large, wide “U” shape. The sides should curve down gently from the ends of the rim to form the basin of the tub.
Step 3: Add the Bathtub Feet
At the bottom of the basin, draw two small, curved legs pointing outward. These “claw-foot” style legs will support the tub.
Step 4: Create the Bubbles
Draw a series of overlapping wavy lines and semicircles across the top of the rim. This creates the appearance of a thick layer of fluffy bath bubbles.
Step 5: Add the Rubber Duck
On the left side of the bubbles, draw the silhouette of a small duck. Start with a circular head, a small beak, and a curved body that looks like it is floating within the foam.
Step 6: Color Your Drawing
Finish your artwork by adding color. Use a bright shade for the duck, a clean tone for the bubbles, and a different color for the bathtub itself to make the illustration pop.
Step 1: Draw the Top Opening
Begin by drawing a large, slightly slanted oval or a rounded rectangular shape. This represents the top edge of the bathtub viewed from an angle.
Step 2: Form the Tub Basin
Underneath the opening, draw a deep, curved “U” shape to create the body of the tub. Connect the ends of this curve to the sides of the top oval.
Step 3: Add the Decorative Feet
Draw four small, “dog-bone” or bulbous shapes at the bottom of the basin. These are the decorative claw feet that hold the bathtub up.
Step 4: Define the Rim
Inside the first oval you drew in Step 1, draw a second, slightly smaller oval. This adds thickness to the rim of the bathtub, giving it a 3D look.
Step 5: Draw the Water Line
Inside the tub basin, draw a wavy horizontal line. This will represent the surface of the water filled inside the tub.
Step 6: Add the Faucet
At the back left corner of the tub rim, draw an upside-down “J” shape to create the faucet. Add a small horizontal band near the tip to represent the spout.
Step 7: Add the Left Handle
To the left of the faucet, draw a small base with a rounded, cross-like handle on top. This is the first tap handle for the water.
Step 8: Add the Right Handle
Repeat the previous step on the right side of the faucet to add the second tap handle, completing the faucet set.
Step 9: Apply Color
Finish your drawing by adding colors. Choose a shade for the bathtub body, a different tone for the feet, and a light blue or clear color for the water and faucet.
Step 1: Draw the rim
Start with a simple shape. Draw a narrow rectangle with rounded corners, like a pill or capsule, in the middle of the canvas. This is the foundation of the rim.
Step 2: Define the basin
Attach a large, U-shaped curve to the bottom of the pill shape from step 1. The ends of the curve should meet the lower straight line of the rectangle, and the bottom of the U-curve should be flattened.
Step 3: Add the feet
Create two ornate clawfeet by drawing a swirling, comma-like hook under each side of the basin’s bottom curve. Position them near the front corners of the tub.
Step 4: The main faucet structure
Above the tub rim, draw a tall, inverted “J” or candy cane shape. This should be a thick, pipe-like curve rising from the inner edge of the rim and hooking down.
Step 5: The faucet handles
Draw two smaller “J” or candy cane hooks, similar to the main faucet, on either side of the pipe base. These smaller shapes represent the hot and cold water taps.
Step 6: Create the foam
Inside the basin, on the right side, add a cluster of large, overlapping semicircles to form a fluffy mass of soap bubbles resting just below the rim.
Step 7: Add rising bubbles
Draw two empty circles of different sizes—one medium and one small—floating in the air directly above the foam stack, representing rising air bubbles.
Step 8: Final details and colors
Color the rim pink and the basin a lighter pink. Fill the foam with light blue and the feet with a light beige or tan. The faucet and handles should be grey, and the floating bubbles can be filled with a light, transparent blue or left white. The tub is now complete and ready for a bath!
Step 1: Start with a single U-shaped line that curves downwards and then horizontally across, creating the lower outline of the tub’s body.
Step 2: Define the basin. Attach two simple, small rounded U-shapes for the tub’s feet. One foot should be placed near the bottom left and the other near the bottom right.
Step 3: Draw a larger, wider U-shape attached to the top of the body, creating the rim of the bathtub. This shape should have slightly indented curves, making it look like a wide bowl.
Step 4: Draw a curved, wavy line inside the basin to represent the water level. This line should be just below the rim and span across the width of the tub.
Step 5: Draw a tall, hooked line for the faucet. The shape should start from the back left of the rim and curve up and over, pointing downwards into the basin. Add a smaller, short horizontal line near the hook’s end to finish the spout.
Step 6: Draw a small, circular knob for the left-side handle. This handle should be placed on the back left of the tub, just next to the faucet. Inside the circle, write a capital ‘H’.
Step 7: Draw a second, small, circular knob for the right-side handle. This handle should be placed on the back left of the tub, just next to the other handle, but slightly to its right. Inside this second circle, write a capital ‘C’.
Step 8: Fill in the colored details. Use a bright yellow for the tub’s main body and handles. Fill the water area with light blue. Use orange for the tub’s feet and handles. Color the faucet spout grey, and the ‘H’ and ‘C’ letters in red and blue respectively.
Step 1: Draw the Rim
Start by drawing a long, thin, horizontal oval shape. Give it a slight wave or curve to make it look like the top edge of a classic bathtub.
Step 2: Form the Basin
Underneath the rim, draw a large “U” shape to create the body of the tub. The sides should curve down from the ends of the rim and meet at a flat or slightly rounded bottom.
Step 3: Add the Clawfoot Legs
Draw two small, curved shapes at the bottom of the basin to represent the legs. These should look like little boots or “L” shapes with rounded edges to give the tub a vintage style.
Step 4: Create the Shower Pipe
On the right side of the tub rim, draw two parallel vertical lines extending upward. At the top, curve the lines over to the left to create the neck of the shower pipe.
Step 5: Attach the Showerhead
At the end of the curved pipe, draw a bell-like or trapezoid shape facing downward. This will be the showerhead where the water comes out.
Step 6: Add Water Droplets
Draw three small teardrop shapes falling from the showerhead. Place them at different heights to make it look like water is splashing into the tub.
Step 7: Complete the Illustration
Review your drawing and ensure all the parts are connected. You now have a complete bathtub with a showerhead and splashing water!
Step 1: Draw the Decorative Rim
Begin by drawing a long, horizontal rim with elegant, scrolled ends. The center should have a gentle dip, and each end should curl inward like a wave or a “c” shape.
Step 2: Create the Basin
Underneath the rim, draw a large, wide curve to form the body of the bathtub. The sides should slope inward slightly, connecting to a broad, rounded base.
Step 3: Add the Clawfoot Legs
Draw two small, stylized legs at the bottom of the tub. These should look like rounded, slightly curled feet to give the bathtub a classic, vintage appearance.
Step 4: Add the First Layer of Bubbles
Inside the tub, draw a series of interconnected bumps and small arcs along the top of the rim. This creates the first layer of fluffy soap suds.
Step 5: Pile Up More Bubbles
Add a second layer of bubbles on top of the first. Draw more rounded arcs at different heights to make the bubble pile look thick and voluminous.
Step 6: Sketch the Tall Shower Pipe
Starting from the left side of the bathtub rim, draw two tall, parallel vertical lines that curve gently inward as they go up.
Step 7: Attach the Showerhead
At the very top of the curved pipe, draw a small semi-circle or dome shape. Close it with a flat line to complete the showerhead fixture.
Step 8: Draw the Water Spray
Coming out from the showerhead, draw several dashed lines or short strokes fanning out toward the bubbles. This represents the water spraying down.
Step 9: Apply the Final Colors
Finish your masterpiece by adding color. Use a bright blue for the main body of the bathtub and a soft pastel purple for the bubbles. Color the showerhead and pipe in light gray, and make the decorative legs a vibrant yellow.
Hopefully, this drawing tutorial on Bathtub will help you easily create a nice drawing.
