You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a beehive with simple steps.
Let’s get started!
Step 1: The Top Cap
Start by drawing a small, horizontal oval or a flattened dome shape. This will serve as the very top section of the beehive.
Step 2: The Second Layer
Add a wider, curved segment directly underneath the first one. Ensure the sides are rounded to give it a “puffy” appearance.
Step 3: Expanding the Width
Draw a third layer below the second. This layer should be slightly wider and thicker than the previous ones, continuing the stacked effect.
Step 4: Creating the Middle Section
Add a fourth layer. At this point, the hive should be reaching its maximum width, creating a sturdy, rounded shape.
Step 5: Beginning the Taper
Draw a fifth layer. Notice that the bottom lines of this layer do not connect in the middle yet—this leaves space for the entrance that will be added later.
Step 6: Rounding the Base
Add a sixth layer. The sides should begin to curve inward slightly as you move toward the bottom of the hive.
Step 7: The Bottom Base
Draw a final, smaller semi-circle at the very bottom to close the hive. This completes the main structural “beehive” shape.
Step 8: Adding the Entrance
In the lower-middle section (where you left the gap in Step 5), draw a small circle with a secondary inner curve to give it depth. This represents the hole where the bees enter.
Step 9: Final Coloring
Fill in the entire beehive with a warm honey-orange or golden-brown color. Use a darker brown for the inside of the entrance hole to create a sense of shadows and depth.
Step 1: Start with the top cap of the beehive
Draw a smooth arc using a single line.
Step 2: Add the side layers of the beehive
Drawing downwards from the ends of the existing cap. Using lines, create a scalloped, stacked-layer texture for the main structure.
Step 3: Finish the main body structure of the beehive
Add a long, curved line across the bottom of the hive, connecting the side walls. This final curve completes the main rounded body.
Step 4: Draw the beehive’s entrance
Place an oval shape on the right side of the main hive body to create the entry point. This hole should have a 3D effect, suggesting a tunnel or passage into the hive.
Step 5: Define the texture with horizontal lines
Using lines, draw several slightly curved horizontal stripes across the front of the beehive. These lines should run behind and around the oval entrance hole, emphasizing the rounded, stacked layer construction.
Step 6: Prepare the hanging connection
Draw two very short, slightly outwards-curved lines on the top-center of the beehive’s cap. These will serve as the base for the attachment that connects the hive to the tree branch.
Step 7: Sketch the tree branch
Draw a long, irregular branch shape extending across the top of the hive, connecting to the vertical lines from the previous step. This branch should feature a wider, more flared end on the left for the trunk connection and a smaller, forked tip on the right.
Step 8: Add details to the tree branch
Using lines, draw two small leaves on a short twig further up the branch and another cluster of two leaves at the forked right tip. This adds natural realism and completes the scene before coloring.
Step 9: Color the completed drawing
Fill the main hive body with bright yellow. Color the branch dark brown. The entrance should be medium brown with a lighter outline. Finally, paint all five leaves green.
Step 1: Start with the basic shape of the branch. Draw a long, slightly wavy outline.
Step 2: Add a small curve to the bottom of the branch outline where the beehive will connect.
Step 3: Define the first tier of the beehive. Draw a small, oval shape, positioned just below the branch curve.
Step 4: Continue building the hive. Draw another slightly larger oval below the first one.
Step 5: Repeat the process, adding a third, slightly wider oval below the previous one, maintaining the same outline.
Step 6: Draw the fourth tier, making it the widest part of the beehive’s body.
Step 7: For the fifth tier, the curve should be slightly smaller as the hive begins to narrow towards the bottom.
Step 8: Draw the final, small oval at the bottom of the beehive, closing the main structure of the hive.
Step 9: Draw a small circle on the fourth tier of the hive to represent the entrance.
Step 10: Now, fill in the colors. Color the beehive an orange-yellow shade, the entrance dark brown, and the branch brown. The final result should look like this!
Step 1: Draw the Main Branch
Start by drawing a slightly curved, horizontal shape to represent the tree branch. Add a small “V” split at the right end to create a fork in the wood.
Step 2: Add Leaves
Draw five oval-shaped leaves sprouting from the forked end of the branch. Include a single line down the center of each leaf for the vein.
Step 3: Draw the Hive Attachment
Underneath the main part of the branch, draw two small, vertical parallel lines. This will serve as the “stem” or connector where the beehive attaches to the tree.
Step 4: Create the Top Section
Draw a wide, rounded oval shape (like a flattened dome) connected to the two vertical lines from the previous step. This is the top layer of the hive.
Step 5: Add the Second Layer
Draw a larger, wider curved line underneath the first section to create the second “ring” of the beehive.
Step 6: Add the Third Layer
Repeat the process by drawing another curved section below the second one. This layer should be the widest part of the hive.
Step 7: Add the Fourth Layer
Continue building the hive downward by adding a slightly narrower curved section beneath the third layer.
Step 8: Add the Bottom Section
Draw one more curved line, smaller than the one above it, as the hive begins to taper toward the bottom.
Step 9: Close the Hive
Draw a small, rounded “U” shape at the very bottom to finish the tapered point of the beehive.
Step 10: Draw the Entrance Hole
In the center of the hive, draw two concentric circles (a smaller circle inside a larger one). This represents the entrance for the bees.
Step 11: Color the Drawing
Finally, bring your illustration to life with color:
– Branch: Dark brown.
– Leaves: Bright green.
– Beehive: Golden yellow.
– Entrance: A darker shade of yellow or tan for depth.
Step 1: The Entrance Base
Start by drawing a small, thin, horizontal oval. This will serve as the bottom “lip” or the landing board for the entrance of the beehive.
Step 2: The Entrance Hole
Draw a semi-circle (an upside-down “U” shape) resting on top of the oval you created in Step 1. This forms the door where the bees go in and out.
Step 3: The First Layer
Draw a large, wide oval shape that goes behind the entrance. This is the first “coil” or layer of the beehive’s body.
Step 4: Adding the Second Layer
Above the first layer, draw another curved line to create a second, slightly smaller section. The beehive should start to look like it is stacking upwards.
Step 5: Continuing the Coils
Repeat the process by adding a third layer on top. Each layer should be slightly narrower than the one below it to give the hive its rounded shape.
Step 6: The Top Dome
Draw a final, smaller curved dome at the very top to close the hive. Your beehive should now have a distinct tiered, “skep” look.
Step 7: The Lower Base
Now move to the bottom. Underneath your first large layer, draw another curved section that tapers inward slightly.
Step 8: Building the Bottom
Add another layer below the previous one, continuing to curve the lines inward as you move toward the bottom of the hive.
Step 9: Finalizing the Shape
Draw one last small, rounded section at the bottom to finish the structure. The overall shape should now look like a rounded, ribbed pot.
Step 10: Coloring
Finally, color your beehive! Use a golden yellow or honey yellow for the main body and a brown or dark orange for the entrance hole to give it depth.
Hopefully, this drawing tutorial on Beehive will help you easily create a nice drawing.
