You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a bench with simple steps.
Let’s get started!
Step 1: The First Backrest Slat
Start by drawing a long, thin horizontal rectangle with rounded corners near the top of your page. This will be the top rail of the bench’s backrest.
Step 2: The Second Slat
Draw an identical rounded rectangle directly underneath the first one. Ensure there is a small, even gap between them.
Step 3: The Third Slat
Repeat the process one more time to create a third horizontal slat. You should now have three parallel rounded rectangles stacked vertically.
Step 4: Vertical Support Posts
Draw two vertical bars behind the slats—one on the left side and one on the right. These should extend slightly above the top slat and below the bottom slat to act as the frame.
Step 5: Decorative Bolts
Add two small circles on each horizontal slat, positioned where the slats overlap with the vertical support posts. These represent the bolts holding the wood to the frame.
Step 6: The Bench Seat
Draw a large, wide trapezoid-like shape overlapping the bottom of the vertical posts. This creates a perspective view of the flat seat where people sit.
Step 7: The Legs
Underneath the seat, draw two sets of vertical lines to form the front legs. These should be aligned with the vertical posts of the backrest to give the bench stability.
Step 8: Color and Detail
Finalize your drawing by adding color. Use a bright yellow or light wood color for the slats and seat, and a darker brown for the support frame and legs. Shading the bolts grey will give them a metallic look.
Step 1: The First Backrest Slat
Start by drawing a long, horizontal rectangle near the top of your page to form the top slat of the backrest.
Step 2: The Second Slat
Draw a second identical horizontal rectangle directly below the first one, leaving a small gap between them.
Step 3: Vertical Support Posts
Draw two vertical bars behind the slats—one on the left and one on the right. These should extend slightly above the top slat and below the bottom slat.
Step 4: Bolts and the Seat Frame
Add two small circles on each backrest slat where they meet the vertical posts to represent bolts. Then, draw a long horizontal line with angled edges at the ends to begin the bench seat.
Step 5: Completing the Seat
Draw another horizontal line slightly below the previous one and connect them to create the front edge and depth of the bench seat.
Step 6: The First Set of Legs
Draw two vertical rectangles extending downwards from the bottom of the seat. These should be positioned directly under the backrest’s vertical support posts.
Step 7: The Front Legs
Add two more vertical rectangles at the very front corners of the seat. This gives the bench its four-legged structure and provides a sense of perspective.
Step 8: Color and Final Details
Finish the drawing by adding color. Use a vibrant green for the slats and the seat, and a sturdy brown for the wooden frame and legs.
Step 1: The Top Backrest Slat
Start by drawing a long, thin rectangular box at a slight diagonal angle. This will be the top slat of the bench’s backrest. Add a small vertical line at the left end to give it a 3D thickness.
Step 2: The Second Backrest Slat
Draw an identical rectangular box directly below the first one. Ensure they are parallel and have a small gap between them to create the classic slatted look.
Step 3: The Left Support Frame
On the left side, draw the vertical support beam that holds the slats together. This includes a rounded top that peeks over the first slat and a thick post extending downward.
Step 4: The Right Support Frame
Repeat the previous step on the right side. Draw the second vertical beam behind the slats, ensuring it aligns with the left one to keep the bench symmetrical.
Step 5: The Seat Base
Draw a large, flat, angled quadrilateral extending forward from the bottom of the backrest. This defines the main surface area of the seat.
Step 6: Seat Plank Details
Divide the seat base by drawing parallel lines across the surface. This turns the solid block into individual planks, matching the style of the backrest.
Step 7: The Left Leg
Beneath the left side of the seat, draw a thick, sturdy leg. Add a decorative arch (a “cut-out” shape) at the bottom to give the bench a more polished, architectural design.
Step 8: The Right Leg
Draw the corresponding leg on the right side. Make sure the perspective matches the rest of the drawing so the bench looks stable and level.
Step 9: Final Coloring
Finish your drawing by adding color. In this example, use a bright cyan/blue for the wooden planks and a golden yellow/tan for the support frame and legs to make the bench pop.
Step 1: The Top Backrest Slat
Draw a long, slightly curved rectangular plank to act as the top of the backrest. Add a small vertical rectangle on the right side to give it a 3D thickness.
Step 2: The Second Backrest Slat
Repeat the previous step by drawing an identical plank directly underneath the first one. Ensure there is a small gap between them.
Step 3: Left Vertical Supports
Draw three short vertical lines connecting the top slat to the bottom slat on the left side. Then, draw three more lines extending downward from the bottom slat to prepare for the seat.
Step 4: Right Vertical Supports
Repeat the vertical lines on the right side of the planks. These serve as the frame that holds the wooden slats together.
Step 5: The Seat Surface
Draw a large, flat quadrilateral (diamond-like shape) extending forward from the bottom of the backrest. This creates the flat surface where people sit.
Step 6: Seat Thickness
Add a front edge and a rounded corner on the right side of the seat to give the plank volume and depth.
Step 7: The Front Left Leg
Underneath the left corner of the seat, draw a sturdy, slightly curved leg. Add a second line next to it to show the side of the leg, making it look solid.
Step 8: The Front Right Leg
Draw a similar curved leg under the front right section of the seat. It should angle slightly outward for stability.
Step 9: The Back Leg
Add a final curved leg reaching out from the back right corner. This leg usually angles backward to prevent the bench from tipping over.
Step 10: Coloring
Finally, color your drawing! Use a bright red for the wooden slats and a natural wood brown for the support frame and legs to make the bench pop.
Step 1: The Front Seat Plank
Draw a long, thin rectangular box to create the front plank of the seat.
Step 2: The Back Seat Plank
Add a second rectangular plank directly behind the first one, leaving a very small gap between them to form the full seating surface.
Step 3: The Lower Backrest Slat
Draw another long rectangular plank floating above the seat to begin the backrest.
Step 4: The Upper Backrest Slat
Draw one more rectangular plank above the previous one to complete the wooden slats of the backrest.
Step 5: Left Frame Support
Sketch the left vertical support beam that connects the seat to the backrest.
Step 6: Right Frame Support
Add the matching vertical support beam on the right side to hold the backrest in place.
Step 7: Front Legs
Draw two sturdy, slightly tapering rectangular legs attached to the front corners of the seat.
Step 8: Rear Legs
Add the two back legs peeking out from behind the front ones to provide balance and perspective.
Step 9: Final Coloring
Finish the drawing by coloring the wooden slats a bright yellow and the support frame a solid grey.
Step 1: The Backrest Face
Start by drawing a long, horizontal trapezoid to represent the front surface of the backrest. The top side should be slightly shorter than the bottom side to create a sense of perspective.
Step 2: Adding Depth to the Backrest
Give the backrest a 3D effect by drawing a narrow rectangle underneath the trapezoid. This represents the thickness or bottom edge of the backrest plank.
Step 3: The Left Support Post
Draw two parallel vertical lines extending downwards from the left side of the backrest. Add a small square shape on top of the backrest to show where the support post connects.
Step 4: The Right Support Post
Repeat the previous step on the right side. Ensure the vertical posts are symmetrical and align with the top connectors.
Step 5: Outline the Seat
Below the backrest and across the support posts, draw a wide, flat trapezoid to form the top surface of the bench seat. It should be wider than the backrest.
Step 6: Adding Thickness to the Seat
Draw a narrow horizontal band along the front and sides of the seat trapezoid to give the bench seat its 3D volume.
Step 7: The Front Legs
Draw two sturdy, slightly angled rectangular legs extending from the bottom of the seat. These legs should flare out slightly towards the bottom for stability.
Step 8: The Back Legs
Draw two more legs positioned behind the front ones. Because of the perspective, these rear legs should appear slightly shorter and tucked behind the seat.
Step 9: Coloring and Shading
Finish the drawing by coloring the bench. Use a light orange or tan for the main surfaces and a darker brown for the edges and legs to create shadows and depth.
Hopefully, this drawing tutorial on Bench will help you easily create a nice drawing.
