You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a can with simple steps.
Let’s get started!
Step 1: Draw the Top Rim
Start by drawing a horizontal oval. This represents the outer edge of the top of the can and establishes your perspective.
Step 2: Add Depth to the Rim
Draw a curved line just below the front half of the oval, connecting to the sides. This gives the rim a three-dimensional thickness.
Step 3: Define the Inner Lid
Inside the original oval, draw a slightly smaller, concentric oval. This represents the actual lid surface that sits recessed within the rim.
Step 4: Add the Pull Tab
In the center-left area of the lid, draw the pull tab. It consists of a teardrop-like shape with two small circles inside—one for the rivet and one for the finger hole.
Step 5: Outline the Can Body
Draw two long, vertical lines extending downward from the edges of the top rim. Curve the lines inward slightly at the top to give the can its characteristic tapered shoulder.
Step 6: Create the Bottom Curve
Connect the two vertical lines at the bottom with a wide, outward-curving line. This creates the base of the can’t main body.
Step 7: Draw the Base Taper
Add a smaller, narrower curve underneath the previous line to represent the bottom rim where the can narrows toward the floor.
Step 8: Apply Final Details
Complete your drawing by adding shading or solid tones. Distinguish between the metallic top assembly and the main label area of the can to give it a finished, realistic look.
Step 1: Draw the Top Oval
Begin by drawing a horizontal oval. This will serve as the top rim of the can.
Step 2: Add Depth to the Rim
Draw a curved line just beneath the front edge of the oval, connecting the two sides to create a three-dimensional rim.
Step 3: Define the Inner Lid
Draw a slightly smaller oval inside the first one to represent the recessed lid of the can.
Step 4: Add the Raised Pull Tab
Sketch a pull tab on top of the lid. Position it at an angle, using an elongated shape with two small holes inside to show it has been lifted.
Step 5: Draw the Can Body
Extend two long vertical lines downward from the sides of the top rim. Curve the lines inward slightly at the top to form the “neck” of the can.
Step 6: Create the Bottom Base
Connect the vertical lines at the bottom with a wide curve, then add another smaller curve below it to finish the base.
Step 7: Outline the Label Area
Draw two horizontal curved lines across the body of the can—one near the top and one near the bottom—to define the label section.
Step 8: Add the Star Logo
In the center of the label area, draw a five-pointed star with rounded edges.
Step 9: Apply Final Colors
Complete the illustration by adding color. Use gray for the metallic top, pull tab, and base. Fill the main label area with orange, the star with bright yellow, and the remaining top and bottom sections of the can body with blue.
Step 1: Draw the Top Rim
Start by drawing a horizontal oval (ellipse). This will form the outer edge of the top of the can.
Step 2: Create Depth for the Rim
Inside the first oval, draw a slightly smaller curved line along the top half to create the inner edge of the rim, giving it a 3D look.
Step 3: Add the Opening Mechanism
Inside the oval, on the left side, draw a small shape consisting of two connected circles. This represents the rivet and the base of the pull-tab.
Step 4: Draw the Pull-Tab
From the base created in the previous step, extend a larger, elongated loop towards the right. This completes the pull-tab used to open the can.
Step 5: Outline the Lid Edge
Draw another curved line just below the main oval to define the thickness of the lid where it meets the body of the can.
Step 6: Draw the Body Walls
From the edges of the top rim, draw two straight vertical lines downward. Add small “bumps” or indentations along these lines to indicate the ridges typically found on metal cans.
Step 7: Form the Bottom Curve
Connect the two vertical lines at the bottom with a curved line that mirrors the shape of the top rim.
Step 8: Define the Bottom Base
Draw one more curved line slightly below the previous one to finish the bottom edge, giving the base a sturdy, metallic appearance.
Step 9: Add the Label Area
Draw a large rectangle on the front of the can. Make sure the top and bottom lines of the rectangle are slightly curved to follow the cylindrical shape of the body.
Step 10: Apply Colors
In the final step, bring your drawing to life with color. The lid and the pull-tab are shaded in a neutral grey to mimic metal. The main body of the can is filled with a vibrant teal or seafoam green, while the front label is a pale cream or off-white. Use darker grey for the rims and bottom base to provide contrast.
Step 1: Draw the Top Opening
Begin by drawing a horizontal oval (ellipse). This represents the top rim of the can where the lid is located.
Step 2: Outline the Can Body
From the sides of the oval, draw two vertical lines extending downwards. At the top of these lines, create a slight inward curve to form the “neck” or tapered shoulder of the can.
Step 3: Draw the Bottom Base
Connect the two vertical lines at the bottom with a wide, curved line that follows the same rounded perspective as the top rim.
Step 4: Add the Lower Taper
Draw another curved line slightly below the bottom edge, creating a smaller rounded section to represent the narrow base of the can.
Step 5: Detail the Shoulder Line
Draw a horizontal curved line across the top part of the can’s body, just below the neck. This defines the area where the tapered top meets the straight cylinder.
Step 6: Define the Interior Rim
Inside the top oval, draw a smaller curved line along the back edge. This adds depth, showing the inner thickness of the metal rim.
Step 7: Sketch the Straw
Draw a bent tube shape emerging from the top of the can. Use two parallel lines that angle upwards and then bend to the right, finishing with a rounded tip. Add a small oval at the base where the straw enters the can to show the opening.
Step 8: Apply Final Colors
In the final step, color the can with a bright cyan or light blue. The top lid, the inner rim, and the bottom base should be shaded with a neutral grey to represent aluminum. For the straw, use a vibrant red for the main body and add a small white stripe at the bend to give it a classic look.
Step 1: Create the Rim
Draw a horizontal oval toward the top of your page. This will serve as the outer edge of the can’s top.
Step 2: Add Depth to the Lid
Directly underneath the first oval, draw a curved line that follows the shape of the bottom half. This creates a small “lip” or thickness for the rim of the can.
Step 3: Outline the Inner Top
Draw a slightly smaller oval inside the first one. This defines the flat surface where the opening and the pull tab will be located.
Step 4: Draw the Pull Tab
Sketch a small, rounded rectangular shape angled upward from the center. Inside this shape, add two small circles to represent the finger holes of the pull tab.
Step 5: Detail the Mouth Opening
Just below the pull tab, draw a small, teardrop-shaped oval. This represents the hole where the liquid is poured out.
Step 6: Form the Body
Draw two vertical lines descending from the sides of the rim. Connect them at the bottom with a wide, curved line to create the cylindrical shape of the can.
Step 7: Define the Label Area
Inside the main body, draw two horizontal curved lines—one near the top and one near the bottom. These lines mark the boundaries for the can’s label or brand design.
Step 8: Add the Base
Draw one final curved line at the very bottom, tucked slightly underneath the body. This completes the structure by showing the recessed base of the can.
Step 9: Apply Color
To finish the drawing, fill the main body of the can with a vibrant bright green. The top lid, the base, and the pull tab should be colored in shades of grey to look like aluminum. Finally, fill the mouth opening with solid black to indicate depth.
Step 1: Draw the Top Rim
Start by drawing a horizontal oval near the top of your paper. This represents the outer edge of the can’s rim.
Step 2: Add the Lip
Directly underneath the first oval, draw a curved line that connects the left and right sides. This adds depth to the upper rim of the can.
Step 3: Outline the Cylinder Body
Draw two long vertical lines extending downward from the sides of the rim. Connect them at the bottom with a wide, curved line to form the main cylindrical body.
Step 4: Create the Base
Draw another curved line just below the bottom of the cylinder. This creates the recessed base that the can stands on.
Step 5: Detail the Label Borders
Inside the body of the can, draw two horizontal curved lines—one near the top and one near the bottom. These lines define the space for the brand name or logo.
Step 6: Add the Label Text
In the center of the label area, write the word “SODA” in large, bold, vertical capital letters.
Step 7: Define the Inner Lid
Go back to the top of the can and draw a slightly smaller oval inside the rim to show the flat top surface.
Step 8: Sketch the Pull Tab
In the center of the inner lid, draw a small, rounded rectangular shape with two small circles inside it. This represents the aluminum pull tab.
Step 9: Draw the Mouth Opening
Just below the pull tab, add a small, teardrop-shaped curve. This is the opening where the drink is poured out.
Step 10: Apply Final Colors
To complete the drawing, color the main body and the label background with a bright yellow. Fill the “SODA” text with a vibrant cyan. Use various shades of grey for the top lid, the base, and the pull tab to mimic metal. Finally, color the mouth opening solid black to show the dark interior.
Hopefully, this drawing tutorial on Can will help you easily create a nice drawing.
