You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a chimney with simple steps.
Let’s get started!
Step 1: Draw the Chimney Cap
Draw a 3D rectangular block at the top center to form the cap or crown of the chimney.
Step 2: Add Vertical Chimney Shaft Lines
Extend three parallel vertical lines downward from the bottom left, center, and bottom right corners of the cap to form the main structure of the chimney shaft.
Step 3: Draw Smoke Clouds
Add puffy, cloud-like outlines rising upward from the top of the chimney cap to represent smoke puffing out.
Step 4: Create Brick Texture Lines
Draw horizontal and vertical dividing lines along the chimney shaft to form a brick pattern across both visible sides.
Step 5: Sketch the Base Roof Line
Draw an angled line extending from the left side of the chimney downward, forming the primary roof ridge peak.
Step 6: Outline the Roof Frame
Add parallel inner angled lines below the left side of the roof ridge to give the roof edge depth and thickness.
Step 7: Extend Right Roof Section
Draw a line continuing from the right side of the chimney shaft extending downward to outline the opposite side of the roof.
Step 8: Add Roof Tile Details
Draw scalloped, curved lines across the lower sections of the roof to define the roof tiles.
Step 9: Color the Drawing
Color the main chimney structure and top rim in shades of reddish-brown and lighter terracotta. Fill the roof structure with bright red, shade the smoke clouds in light and medium gray, and keep all main outlines sharp and black.
Step 1: Draw the Upper Chimney Crown
Draw a 3D rectangular box with a central dividing vertical line to form the upper projecting crown of the chimney.
Step 2: Add the Small Top Chimney Pot
On top of the crown, draw a smaller trapezoidal top piece connected by two small vertical supporting lines and a horizontal base line.
Step 3: Sketch Vertical Chimney Lines
Draw three long parallel vertical lines extending downward from the left, middle, and right bottom edges of the crown to form the main body shaft.
Step 4: Close the Chimney Base
Connect the bottom of the three vertical lines using a horizontal line on the front side and an angled upward line on the right side to establish the bottom perspective of the column.
Step 5: Add Brick Pattern Lines
Draw staggered horizontal and vertical grid lines along both exposed sides of the vertical shaft to create a brick wall texture.
Step 6: Outline the Roof Section
Draw a large, angled four-sided parallelogram around the base of the chimney to form the slanted roof surface.
Step 7: Detail Roof Shingle Joints
Add several horizontal and angled perpendicular lines across the surface of the roof to indicate shingle overlapping and seams.
Step 8: Fill with Colors
Color the main chimney shaft with terracotta reddish-brown tones, highlighting individual bricks. Shade the chimney crown and top pot in a darker brown tone, fill the roof surface with a light warm brown, and maintain clean black outlines throughout the drawing.
Step 1: Draw the Snow Cap Outline
Draw a wavy, cloud-like shape with a dripping bottom edge across the top section to form a thick layer of snow resting on the chimney cap.
Step 2: Complete the Chimney Cap Rim
Draw a straight horizontal line under the snow shape, connecting it to vertical side edges to form the rectangular base of the chimney cap.
Step 3: Draw the Main Chimney Shaft Outline
Extend two long, parallel vertical lines downward from the ends of the cap rim and connect them at the bottom with a straight horizontal line to form a square body.
Step 4: Add Horizontal Brick Row Guidelines
Draw four evenly spaced horizontal lines across the entire front face of the chimney shaft to create rows for the bricks.
Step 5: Add Vertical Mortar Joints
Draw short vertical lines between the horizontal rows in a staggered pattern to divide the structure into realistic individual bricks.
Step 6: Color the Finished Drawing
Color the snow cap at the top in a light powder blue. Fill the rim and alternating bricks in a dark reddish-brown tone, and color the remaining bricks in a vibrant red tone, keeping all outer and inner line art crisp and black.
Step 1: Sketch the Top Opening Frame
Draw a inner and outer nested parallelogram at the top to form the rim opening of the chimney crown.
Step 2: Add Lower Cap Curves
Draw two outward-curving side lines extending from the front corners, connected by a horizontal line, to create the thick upper molding edge.
Step 3: Define the Upper Trim Base
Draw vertical side segments downward from the molding edge and connect them with a horizontal line to form a flat trim collar.
Step 4: Draw Vertical Shaft Guidelines
Draw three long parallel vertical lines extending downward from the left, middle, and right bottom corners of the collar to establish the tall body shaft.
Step 5: Sketch the Angled Base Trim
Draw two angled trapezoids flared outward from the bottom corners of the shaft to form the upper ledge of the base pedestal.
Step 6: Complete the Base Pedestal
Extend short vertical lines downward from the base ledge and connect them with a horizontal front line and an angled right line to close the bottom pedestal.
Step 7: Add Brick Grid Pattern
Draw horizontal rows across the front and right surfaces, then add staggered vertical joint lines to divide both faces into individual bricks.
Step 8: Fill with Colors
Fill the top opening with solid black to create depth. Color the top molding, collar, and bottom pedestal in peach and dark terracotta shades. Shade individual bricks across both faces using varied shades of red, orange, and light brown to give a realistic brickwork effect, keeping all outer outlines black.
Step 1: Sketch the Puffy Smoke Cloud
Draw a wavy, cloud-like shape with rounded bumps extending upward to represent a puff of smoke rising from the chimney.
Step 2: Draw the Chimney Cap Collar
Directly below the smoke puff, sketch a 3D rounded rectangular block with soft corners to form the outer lip of the chimney cap.
Step 3: Add the Inner Flue Opening
Inside the top surface of the cap, draw a smaller rectangular rim opening with inner vertical corner lines to give depth to the flue cavity.
Step 4: Draw Upper Brick Rows
Underneath the chimney cap collar, draw three rows of rounded rectangular bricks in a staggered pattern.
Step 5: Add Lower Brick Rows
Continue extending the chimney column downward by drawing two additional rows of staggered, rounded rectangular bricks.
Step 6: Connect Side Outline Lines
Draw short vertical connecting line segments along the outer side edges to join the gaps between the brick rows into a continuous column shaft.
Step 7: Sketch the Flat Base Support
Draw a wide, low trapezoidal mound shape at the bottom of the column to form a sturdy base foundation.
Step 8: Fill with Colors
Color the smoke puff in light grey and shade the inner flue hole black. Fill all individual bricks, the top cap, and the bottom base with a warm reddish-brown brick color, and paint the mortar spaces between the bricks in a soft yellowish-beige tone.
Hopefully, this drawing tutorial on Chimney will help you easily create a nice drawing.
