You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a coconut with simple steps.
Let’s get started!
Step 1: The Top Rim
Start by drawing a slightly tilted, horizontal oval shape. This will serve as the top surface or the “cut” edge of the halved coconut.
Step 2: Adding Volume
Draw a deep, curved “U” shaped line underneath the oval to create the bottom half of the coconut shell, giving it a 3D bowl-like appearance.
Step 3: Defining the Husk
Inside the first oval, draw a slightly smaller oval following the same shape. This represents the thickness of the outer brown shell (the husk).
Step 4: The Inner Flesh
Draw one more smaller oval in the very center. This creates the hollow part of the coconut and separates the white meat (the “flesh”) from the center.
Step 5: The Whole Coconut
Behind your coconut half, draw a large, slightly irregular circle. This will be the second, whole coconut sitting in the background.
Step 6: Adding the “Eyes”
On the right side of the whole coconut, draw three small circles close together. These are the characteristic “eyes” or germination pores found at the top of a coconut.
Step 7: Coloring
Finally, bring your drawing to life with color. Use a dark brown for the outer shells, a light cream or white for the inner meat, and a deeper brown for the three “eyes.”
Step 1: The Base
Start by drawing a large, wide “U” shape to form the main body of the coconut.
Step 2: Closing the Top
Connect the two ends of the “U” with a slightly curved, irregular line to give it a natural, organic look.
Step 3: The Scalloped Cut
Inside the top area, draw a wavy or “scalloped” line to represent the edges where the coconut was chopped open.
Step 4: Adding Depth
Draw short, vertical lines at the “dips” of your wavy line to add a bit of 3D depth to the cut surface.
Step 5: Defining the Rim
Follow the wavy line with another parallel line just below it to create the thickness of the coconut’s outer shell.
Step 6: The Juice Opening
Draw a small oval in the very center of the top surface to mark the hole where the straw will go.
Step 7: Inserting the Straw
Draw two long, parallel lines coming out of the center hole, then bend them at an angle to create a “flexible” straw.
Step 8: Straw Details
Add small diagonal lines along the length of the straw to create a classic striped pattern.
Step 9: Final Color
Finish your masterpiece with color:
– Bright green for the outer skin.
– Off-white or cream for the inner meat and top surface.
– Red and white stripes for the straw to make it pop.
Step 1: Draw the Stem Base
Start by drawing a small, tilted oval at the top right of your canvas. This will represent the cut end of the coconut’s stem.
Step 2: Form the Long Stem
From the oval, draw two long, wavy lines extending to the left that meet at a sharp point. This creates the long, curved stem attached to the fruit.
Step 3: Outline the Right Side
Starting from the bottom of the stem, draw a large, sweeping C-shaped curve to form the right side and the bottom base of the coconut.
Step 4: Complete the Coconut Body
Draw another curved line on the left side to close the shape. Notice that the bottom has a slight indentation (like a heart or a peach shape) rather than being a perfect circle.
Step 5: Add the Bracts (Husk Leaves)
Draw three or four small, rounded petal-like shapes right where the stem meets the top of the coconut. These are the bracts that hold the fruit to the branch.
Step 6: Draw the Eyes and Eyebrows
Inside the upper half of the body, draw two small circles for the eyes. Above each eye, add a short, curved line for the eyebrows to give it a friendly expression.
Step 7: Add a Big Smile
Draw a large, wide D-shape for the mouth. Add a horizontal line inside for the teeth and a small curve at the bottom for the tongue to make the coconut look happy.
Step 8: Color Your Drawing
Finally, fill in your drawing with color. Use bright green for the main body and the stem, a darker green for the bracts, and black for the eyes. Don’t forget to leave the teeth white!
Step 1: Start with an Initial Guide Ellipse
Begin by drawing a single diagonal ellipse positioned slightly off-center to the right, which will serve as the initial guide for the cut face of the coconut half.
Step 2: Define the Outer Rim with a Parallel Line
Next, create the main thickness of the rim by tracing a parallel line just inside the initial guide, effectively forming a concentrated double ellipse.
Step 3: Add the Inner Water Core Ellipse
Now, draw a third, smaller ellipse centered inside the others to mark the boundary for the coconut’s core or water cavity.
Step 4: Draw the Lower Husk Volume
To construct the rest of the halved coconut’s volume, add a long curved arc extending from the outer edge to create the rounded bottom section.
Step 5: Lay Down the Shape for the Whole Coconut
Next, start drawing the second coconut by placing a large circle partially behind the left side of the existing halved one to establish its main body.
Step 6: Coloring
Finally, bring your drawing to life with color. Use a dark brown for the outer shells and a light cream or white for the inner meat.
Step 1: Start by drawing a large tilted oval. This will serve as the opening or the “face” of the first coconut half.
Step 2: Add a deep curve underneath the oval to create the outer shell, making the shape look like a bowl.
Step 3: Draw a smaller oval inside the first one to represent the thickness of the coconut meat (the white part).
Step 4: Draw a third, even smaller oval in the very center. This defines the hollow area where the coconut water would be.
Step 5: Behind the first half, draw another large oval to begin the second half of the coconut.
Step 6: Just like in Step 2, add a curved line at the bottom of the new oval to give the second half its 3D volume.
Step 7: Draw an inner oval on the second half to show the layer of coconut meat.
Step 8: Complete the line work by adding the center oval to the second half, finishing the hollow interior.
Step 9: Finally, color your drawing. Use dark brown for the outer hairy shell and a creamy off-white or light beige for the inside meat.
Step 1: Start by drawing a wide, deep U-shaped curve to form the bottom base of the coconut shell.
Step 2: Connect the top ends of the curve with a large oval to create the opening of the coconut.
Step 3: Draw a smaller oval inside the first one to represent the thickness of the coconut meat.
Step 4: Add a curved line inside the inner oval to create depth, showing the water level inside the shell.
Step 5: Draw several short, vertical lines on the outer shell to give the coconut a natural, textured look.
Step 6: Draw a straight, diagonal line leaning to the left, starting from inside the coconut, to serve as the stick for an umbrella.
Step 7: At the top of the stick, draw a triangular umbrella shape with several radiating lines to show the folds of the paper.
Step 8: Add a small wavy line on the surface of the liquid to represent a ripple where the straw will go.
Step 9: Draw a long, bent straw sticking out of the water, passing through the ripple you just created.
Step 10: Finish by coloring your drawing: use green or brown for the shell, light blue for the water, and bright colors for the straw and umbrella.
Hopefully, this drawing tutorial on Coconut will help you easily create a nice drawing.
