You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a coffee cup with simple steps.
Let’s get started!
Step 1: Draw the top of the lid
Start by drawing a wide, horizontal oval shape near the top of your page to form the very top surface of the lid.
Step 2: Add the upper rim of the lid
Draw two short lines angling downward and outward from the left and right sides of the oval. Connect the bottoms of these two lines with a curved line that mirrors the bottom curve of the oval.
Step 3: Outline the base of the lid
Draw a larger, thin oval loop slightly overlapping around the bottom curve you just made to begin forming the protruding bottom rim of the lid.
Step 4: Complete the thick lower rim
Extend two short angled lines downward from the outer edges of the new loop, and connect them with a curved line along the bottom to give the lower rim of the lid its full, thick shape.
Step 5: Start the upper part of the cup
Draw two vertical lines extending downward from underneath the lid—one on the left side and one on the right side.
Step 6: Form the sleeve section
Draw a wide band across the middle section. Use a curved line for the top edge connecting the two side lines, continue the side lines downward, and close it with another curved line at the bottom to form the cup’s protective sleeve.
Step 7: Draw the bottom of the cup
Extend two lines downward from the bottom corners of the sleeve, tapering inward slightly towards the base. Connect them at the bottom with a curved line to finish the main body of the cup.
Step 8: Add details to the top of the lid
Sketch the inner details on the top oval surface of the lid by adding a smaller inner oval line and a tiny oval hole on the right side.
Step 9: Add the rising steam
Draw three wavy, vertical lines floating just above the right side of the lid to represent hot steam rising from the cup.
Step 10: Color the drawing
Fill in your drawing with colors. Color the entire lid a dark grey-brown. Color the protective sleeve a soft, light brown. The main body of the cup should be colored a creamy off-white or beige. Finally, color the rising steam lines a dark grey-brown to match the lid.
Step 1: Draw the topmost surface of the lid
Start by sketching a flat, wide oval shape near the top of the drawing area. This forms the upper flat section of the cup’s lid.
Step 2: Add the vertical edge of the top lid section
From the left and right edges of the oval, draw two short vertical lines downward. Connect the bottom of these lines with a curved line that matches the curve of the oval above, creating a shallow cylindrical shape.
Step 3: Draw the upper part of the wider base rim
Outline a larger, wider oval loop that starts slightly behind the sides of the first cylinder and curves outward to establish the protruding bottom rim of the lid.
Step 4: Complete the thick base rim of the lid
Draw two short vertical lines downward from the outer edges of the wider loop you just made, and connect them with a curved line across the bottom to finish the entire lid structure.
Step 5: Add a drinking hole
Inside the top surface of the lid, sketch a small, rectangular or trapezoidal opening slightly tilted near the right side to represent the spout or drinking hole.
Step 6: Outline the body of the cup
Draw two long lines extending downward from the bottom edge of the lid, tapering slightly inward toward each other. Connect them at the base with a curved line to define the full body of the cup.
Step 7: Create the protective sleeve section
Draw two horizontal curved lines across the cup’s body—one near the middle and one further down—to outline a wide band representing the cardboard protective sleeve.
Step 8: Write the label text
Inside the protective sleeve band, neatly sketch the text “COFFEE” in block letters across the center.
Step 9: Sketch the coffee beans
At the base of the cup, add three small oval shapes to represent scattered coffee beans. Place two overlapping beans next to the bottom-left edge of the cup and one separate bean on the right side. Add a small line through the middle of each bean.
Step 10: Color the final drawing
The lid is colored a soft pinkish-tan or light beige, with the inside of the drinking hole colored a darker brown. The main body of the cup is a vibrant coral pink. The protective sleeve is a classic golden-brown or mustard yellow, while the text “COFFEE” is black. The three coffee beans at the bottom are colored a rich, dark roasted brown.
Step 1: Draw an Oval Foundation
The foundational sketch for the entire cup begins with drawing a large, plain oval shape. Place it slightly above the center of the canvas and orient it horizontally. This simple oval serves as the future rim of the coffee cup.
Step 2: Establish the Cup Body
From the left and right curved endpoints, extend two smooth, downward-curving arcs. These arcs should meet to form a large, deep bowl-like shape beneath the oval, creating the main body of the cup.
Step 3: Attach the Handle
On the lower-left side of the cup body, draw a smaller, elongated oval-like loop attached directly to the outer surface. This is your handle. Make sure to define the space inside the handle as well, giving it dimension.
Step 4: Add the Internal Rim Detail
Draw a second, slightly smaller concentric oval just inside the original oval at the top. This simple inner line creates the thickness of the cup’s rim and immediately defines the inner container space where the coffee will sit.
Step 5: Start the Central Art Pattern
Right in the center of the liquid surface, draw two overlapping, delicate heart-like forms made with simple, graceful strokes. This initial pattern looks almost like a stylized “M” or intertwined wings, floating centrally on the liquid.
Step 6: Expand the Latte Art
Add much larger, enveloping curved strokes around the initial central hearts. These outer curves should create an overall massive heart or tulip shape that fills most of the liquid area.
Step 7: Define the Exterior Icon
On the exterior front of the cup body, centered horizontally, draw a distinct, simple icon of a coffee bean. This icon should look like an almond shape with a classic wavy or curved line running down its center.
Step 8: Finalize with Full Color and Clean Lines
Color the coffee itself with a rich, inviting orange-brown or warm caramel tone. Leave the elaborate latte art and the interior rim of the cup pure white, creating a bold, graphic contrast. The exterior cup body and the entire handle are colored in a soft, smooth beige or light tan hue. Color the exterior coffee bean icon a darker, earthy brown, with its central dividing line remaining a darker shade for definition.
Step 1: Draw the Cup Rim
The foundational element for the entire composition is a neat pair of concentric ovals, forming the thick upper rim of the cup.
Step 2: Establish the Cup Body
From the lower outer edge of the outer rim oval, draw a smooth, rounded U-shape that defines the main body of the cup.
Step 3: Add the Main Handle
On the right-hand side of the cup body, attach a smaller, stylized C-shape for the main handle structure, leaving the interior space of the loop open.
Step 4: Refine the Handle and Define the Liquid
To add dimension, draw a inner line within the handle’s C-shape. Also, add two simple, wavy lines inside the inner rim oval to suggest the surface of the coffee.
Step 5: Add Rising Steam
Directly above the center of the cup rim, draw three simple, graceful, S-shaped lines rising upward to suggest steam.
Step 6: Decorate with a Heart
On the front-center of the cup body, add a neat, symmetrical heart shape.
Step 7: Add Decorative Leaves
To the left and right sides of the base of the heart on the cup body, add a simple, single leaf shape to complete the decoration.
Step 8: Start the Saucer
Directly beneath the bottom curved edge of the cup body, draw a small, flat oval to indicate the immediate base or top surface of the future saucer.
Step 9: Complete the Saucer
Extend the existing small oval base with a much larger, matching concentric oval that forms the wider platter of the saucer. Add a few small parallel horizontal lines beneath the right edge to define its thickness.
Step 10: Full-Color Transformation
The entire cup body and the saucer are a light, clean gray. The handle is colored in a light tan. The coffee liquid inside the rim is a deep, rich brown. The three steam lines rising from the coffee are a lighter, soft brown. The decorative heart on the cup is a bright, warm pink. The two leaves framing the heart are a deep, grassy green.
Step 1: Oval
Start by drawing a large oval shape. This will form the top rim of the coffee cup, establishing the viewing perspective from slightly above.
Step 2: Cup Bowl
Add the main body of the cup. Draw a large, deep curved line starting from one side of the oval, sweeping down and across, and attaching back to the other side of the oval.
Step 3: Handle
Draw the handle on the right side of the cup. It is a ‘C’ or ear-like shape. Create the outer edge of the handle and then draw a smaller ‘C’ shape inside it to define its thickness and attachment points to the cup bowl.
Step 4: Rim and Liquid
Define the thickness of the cup’s rim. Draw a second, slightly smaller oval parallel to the first one on the inside. Then, create the surface of the coffee liquid by adding a third, smaller oval inside that, forming the concentric pattern
Step 5: Center Heart
Begin the latte art by drawing a simple, open heart shape near the center-top of the innermost oval. The bottom point of the heart should be open and point towards the center of the liquid surface
Step 6: Latte Swirls
Build the intricate latte pattern from the heart. Draw multiple stacked curved lines, similar to stacked petals or flames, stemming from the sides of the heart and curving towards the rim.
Step 7: Swirl Tips
Complete the symmetry and definition of the latte art. Extend the lowest curved lines and have them meet at a single sharp point at the bottom, mimicking the foam being pulled through.
Step 8: Final Coloring and Inking
The heart and all the foam swirls are rendered in bright white, while the area around the foam is filled with a rich, warm brown for the coffee. The cup itself and its handle are colored a soft, light beige or pale cream.
Step 1: The Cup Sleeve Foundation
Establish the central shape of the drawing by creating the cup sleeve. Draw a four-sided shape with slanted vertical sides, a curved top line, and a slightly longer curved bottom line, similar to a wide trapezoid with rounded horizontal edges.
Step 2: Adding the Coffee Bean Logo
Draw the coffee bean logo on the front surface of the sleeve. This logo is a split oval shape with a wavy vertical line through the middle. Place it centrally on the sleeve.
Step 3: Texture on the Sleeve
Draw texture on the sleeve to make it realistic. Add multiple thin, parallel, horizontal lines across the entire front of the sleeve, passing over the bean logo. This adds the ribbed or corrugated texture.
Step 4: The Cup Structure
Create the paper cup that the sleeve wraps around. Draw two vertical lines, one on each side, extending up from the sleeve. At the bottom, extend the curved bottom line of the sleeve further, and draw a solid bottom surface.
Step 5: Defining the Cup’s Lower Ribs
Further define the shape of the cup’s lower section. Draw a slightly wider, curved surface right below the corrugated sleeve and above the solid cup base, creating a tiered lower portion.
Step 6: The Rim
Place the cup’s top rim. Draw a thin, slightly flattened oval or donut shape that wraps around the entire upper edge of the vertical cup walls.
Step 7: The Lower Lid Base
Construct the bottom part of the plastic lid. Draw another curved surface directly above the rim, forming the lower base for the rest of the lid.
Step 8: The Full Lid Cover
Complete the main structure of the dome-shaped plastic lid. Add a larger, curved cover shape on top of the base created in Step 7.
Step 9: Final Lid Details
Add the very top details of the lid. Draw a smaller oval or ring near the very center of the top dome and place a small, thin oval or slot shape within it. This defines the drinking hole and center press.
Step 10: Coloring and Final Appearance
The corrugated sleeve is colored warm, medium brown, while the coffee bean logo on its front is a deep, dark brown. The visible paper parts of the cup (above, below, and at the base) are colored light off-white or cream. Finally, the entire plastic dome lid is colored dark gray.
Hopefully, this drawing tutorial on Coffee Cup will help you easily create a nice drawing.
