You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw curtains with simple steps.
Let’s get started!
Step 1: Drawing the Curtain Rod
Start with two straight, horizontal parallel lines near the top of your page.
Step 2: Adding the Finials
Draw a small circle at each end of the parallel lines to represent the decorative rod holders or finials.
Step 3: Outlining the Outer Edges
Draw two long vertical lines, one starting from each end circle and extending toward the bottom of the page.
Step 4: Defining the Bottom Hem
Draw a wavy horizontal line at the bottom to connect the outer edges. Add two slightly inward-sloping lines from the ends to give the curtain fabric some shape.
Step 5: Creating the Center Opening
Draw a short, curved line high up in the middle. Connect this curve to the side sections with two long, diagonal curves to show the curtains being pulled open.
Step 6: Adding the Tie-Backs
Draw a small band or strap across each lower section of the curtain fabric to indicate where they are gathered.
Step 7: Sketching the Fabric Folds
Draw several vertical lines flowing down from the top drape and within the bottom sections to suggest realistic pleats and folds.
Step 8: Final Coloring
Apply a bright blue to the curtain fabric, use an orange-yellow for the top rod, and shade the tie-back bands with a slightly darker blue to finish the look.
Step 1: Drawing The Curtain Rod
Begin by sketching a single horizontal rounded rectangle at the top of your drawing area. This serves as the basic curtain rod, establishing the main structure for the window treatment.
Step 2: Adding the Top Drapes
Draw two large, downwards-curving arches that hang from the underside of the rod. Make sure they meet precisely in the middle. These two sweeping curves represent the soft, decorative valance that will frame the top of the curtain.
Step 3: Creating the Center Opening and Outer Lines
To define the main opening of the curtains, draw two diagonal lines that start from the top center and flare outwards towards the bottom. Next, draw a simpler straight vertical line down from each of the two outer corners to outline the full side drapes. This step creates the distinctive inverted ‘V’ shape of tied-back curtains.
Step 4: Defining the Tie-Back Placement
Draw a narrow, diagonally-slanted band or ring near the bottom outer edge of each curtain section. These small bands are crucial as they represent the holdbacks or tie-backs that gather the fabric, effectively defining where the curtains are pinched and pulled aside.
Step 5: Adding the Bottom Outline of the Drapes
Start to build the lower curtain fabric by drawing simple, straight lines. Extend two parallel-ish lines downwards from each of the small tie-back rings to suggest the flowing fabric. These lines don’t need to be perfect yet, just establish the general shape.
Step 6: Creating the Bottom Edge
Now, give the bottom of the curtains a natural, flowing drape. At the base of the lower curtain lines you just drew, sketch in soft, uneven scalloped or wavy curves. This replaces a flat, straight line, giving the curtains a much more realistic and dynamic appearance.
Step 7: Detailing the Fabric Folds
Add realism and depth by drawing a few vertical or slightly curved lines. Place them flowing down from the top center drape and also within the bottom gathered sections. These simple detail lines are very effective at representing the natural pleats and folds of the fabric.
Step 8: Final Coloring and Completion
For the final step, apply vibrant green color to all of the curtain fabric. Use a darker shade of green for the top valance arches to create a contrast and shadow. Finally, fill the curtain rod with grey and the two tie-back bands with a bright yellow to complete the entire drawing.
Step 1: Drawing the Initial Rod Lines
Start by drawing two parallel horizontal lines near the top of the canvas to create the initial structure of the curtain rod. These lines define the width and positioning of the rod.
Step 2: Drawing the End Finials
At the outer edge of each of these ends, draw a circle to represent the decorative finials.
Step 3: Sketching the Curtain Swags
Along the top edge of the curtain rod, draw two series of connected, u-shaped scallop lines, moving from each end towards the center. This step outlines the initial shape of the draped fabric where it hangs from the rod.
Step 4: Drawing the Initial Side and Center Drapes
Draw four distinct vertical lines hanging from the curtain rod. Place one line straight down from the inner side of each finial, and two more lines near the center of the rod that curve inwards towards each other as they move downwards.
Step 5: Sketching the Curtain Tie-Backs
At the bottom end of each set of draped lines, draw a distinct, curved, oval-like shape to represent the tie-back that will pull the curtains to the side.
Step 6: Drawing the Lower Curtain Panels
Extend the curtains downward by drawing two new rectangular-like panels. These shapes should be positioned directly below the tie-back ovals, narrowing slightly at the bottom edge.
Step 7: Adding Fabric Folds and Creases
Add detail to the curtains by drawing several sets of internal curved and straight vertical lines. These lines should start from the top edge and tie-back areas, following the natural flow of the fabric to create realistic folds and drapes.
Step 8: Applying Final Colors and Shading
The final step is to fill in the entire drawing with color. Make the curtain fabric red, the curtain rod yellow, and all the visible lines and outlines black to provide clear definition.
Step 1: Drawing the Top Wavy Edge
Begin by drawing a horizontal wavy line near the top of your page. This represents the top edge of the curtain where it will eventually hang from the rod.
Step 2: Outlining the Main Curtain Body
From the ends of the wavy line, draw two long lines downwards. The line on the left should curve deeply inwards toward the bottom right, while the line on the right should drop down more vertically with a slight curve, creating the silhouette of a swept-back curtain.
Step 3: Adding the Curtain Tie
At the point where the two side lines converge at the bottom, draw a small, rounded horizontal band. This acts as the tie-back holding the fabric together.
Step 4: Drawing the Bottom Tail
Extend two lines downward from the tie-back to create the bottom section of the curtain. Finish this section with a small wavy line at the very bottom to match the texture of the top edge.
Step 5: Creating the Grommet Slots
Along the top wavy edge, draw four pairs of small vertical curved lines. These will serve as the openings or “eyelets” for the curtain rod to pass through.
Step 6: Sketching the Curtain Rod
Draw a thin horizontal rod passing through the slots you created in the previous step. Add a decorative circular finial at each end of the rod to complete the hardware.
Step 7: Adding Vertical Fold Lines
Draw long, slightly curved vertical lines starting from the top wavy edge and the grommet slots, extending all the way down to the tie-back and through to the bottom tail. This gives the fabric a sense of volume and folding.
Step 8: Creating the Checkered Pattern
To create the pattern, draw several wavy horizontal lines across the entire body of the curtain and the bottom tail. These lines should follow the contour and “flow” of the draped fabric.
Step 9: Final Coloring
Finish your drawing by applying color. Fill in the curtain rod and the tie-back with a solid tone, and then color the checkered pattern on the fabric by alternating colors in the grid squares.
Step 1: Draw the Top Edge
Start by drawing a long, horizontal line across the top of your page. This serves as the upper boundary for the curtain rod and the top valance.
Step 2: Add the Side Slants
From each end of the horizontal line, draw a short line angled slightly outward and downward. This creates the side edges of the top fabric section.
Step 3: Create the Wavy Bottom
Connect the bottom of the two slanted lines with a continuous wavy or scalloped line. This gives the valance a soft, decorative appearance.
Step 4: Draw the Curtain Rod Ends
Add small circles at both top corners, slightly overlapping the fabric edges. Connect these circles to the main valance with two short horizontal lines to represent the rod and finials.
Step 5: Outline the Main Fabric Panels
Draw four vertical lines descending from the valance. Place two straight lines near the outer edges and two curved lines in the center that bow inward toward each other, suggesting the opening of the curtains.
Step 6: Add the Decorative Tiebacks
Across each side panel, draw a small, curved rectangular shape with a circular detail at the outer end. These shapes act as the fabric holders or tiebacks pulling the curtains open.
Step 7: Extend the Lower Panels
From the bottom of the tiebacks, continue the vertical lines downward. Make these lines slightly wavy to suggest the natural folds of the hanging fabric.
Step 8: Close the Bottom Edges
Finish the shape of the lower panels by drawing a wavy, irregular line across the bottom of each side. This gives the base of the curtains a ruffled, weighted look.
Step 9: Final Details and Shading
Complete your drawing by adding solid tones to distinguish the different layers of fabric. Use a darker shade for the top valance and tiebacks, and a lighter shade for the main hanging panels to provide depth and contrast.
Step 1: Draw the Curtain Rod
Begin by drawing a long, thin horizontal rectangle with rounded ends. This represents the curtain rod where the fabric will hang.
Step 2: Add the Curtain Rings
Draw several small, vertical oval loops spaced evenly along the rod. Divide them into two groups, leaving a gap in the center of the rod. These rings will hold the curtain panels.
Step 3: Sketch the Upper Curtain Panels
Starting from the bottom of the rings, draw the upper section of two curtain panels. Use curved lines that sweep inward toward the center and outward toward the sides, creating a draped effect.
Step 4: Add the Tiebacks
Draw a small horizontal band across the narrowest part of each curtain panel. These tiebacks represent the fabric or hardware used to pull the curtains to the side.
Step 5: Draw the Lower Curtain Panels
From the bottom of the tiebacks, extend the lines downward to create the lower half of the curtains. Finish the bottom edges with a wavy, ruffled line to simulate the folds of the fabric.
Step 6: Outline the Window Frame
In the open space between the two curtain panels, draw two curved horizontal lines at the top and two straight horizontal lines at the bottom. This defines the visible part of the window frame behind the curtains.
Step 7: Color and Finish
Complete the drawing by adding color. Use a vibrant shade for the curtain fabric, a contrasting color for the tiebacks, and natural wood or metallic tones for the rod and window frame. Fill the center area with a light blue to represent the glass.
Hopefully, this drawing tutorial on Curtains will help you easily create a nice drawing.
