You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a dagger with simple steps.
Let’s get started!
Step 1: Start with the Pommel
Begin your drawing at the top center of the canvas. Draw a simple, symmetrical arch shape, like a curved cap, which will become the bottom part of the dagger’s pommel. This first element forms the foundation for the handle.
Step 2: Establish the Grip
Now, you will create the structure for the grip (the handle). Below the arch you drew in the first step, draw two symmetrical, slightly curved parallel lines extending downwards. Connect the tops of these two lines to the bottom of the pommel arch with a horizontal line. This defines the volume of the grip.
Step 3: Define the Handle
Close the bottom of the grip with a curved line, matching the curve at the top. This completes the handle shape. Just below this new line, draw the very beginning of the crossguard: a wide, sweeping, wavy curve that will become the upper part of the guard.
Step 4: Complete the Crossguard
Extend the initial guard lines down and around to form elaborate, swirling curls on both the left and right sides. Finish the central section with a point that dips down, creating the classic S-shaped guard structure. Ensure this guard is wide and visually separates the handle from the future blade.
Step 5: Begin the Blade
From the center point of the guard, draw two simple, curved lines that extend down and slightly inwards. This creates the beginning of the dagger’s blade, just at its base.
Step 6: Form the Main Blade
Continue the curves you started in Step 5. Extend these lines far down, tapering them gracefully until they meet at a sharp point. This defines the full, symmetrical silhouette of the dagger’s blade. Ensure the length of the blade is proportional to the handle and guard, forming a slender, elegant shape.
Step 7: Add Blade Details and Full Outline
Draw a single, vertical line down the exact center of the entire blade length, from the guard point to the tip. Then, inside each side of the main blade outline, draw another parallel line to represent the sharp edge and bevel.
Step 8: Apply Final Colors
– Handle and Pommel Base: Fill the main body of the grip (the curved handle) and the main body of the pommel (the curved cap) with a warm brown, suggesting wood or leather.
– Guards and Blade: Color the entire crossguard and the full blade with a uniform light gray, giving them the appearance of polished metal.
– Decorative Accents: Color the two small, horizontal decorative bands on the grip with a rich, metallic gold. Finally, color the small detail at the very apex of the pommel with the same metallic gold.
Step 1: Starting the Hilt and Pommel
Create the lower hilt section with a series of connected, curving lines that widen slightly. At the top of this shape, draw the basic outline of a classic, scalloped pommel with a small central point.
Step 2: Defining Handle Segments
Draw two symmetrical vertical curves to divide the lower hilt into distinct grip segments.
Step 3: Drawing the Main Handle
Draw the main part of the handle extending downwards from the center of the base hilt. Create the contoured, slightly bulbous grip with two curving parallel lines, ensuring the curves are symmetrical. Complete the grip by drawing a rounded bottom shape for the handle’s end cap.
Step 4: Creating the Complete Crossguard
Continue by drawing the full crossguard structure. On the central, horizontal segment of the base hilt, draw two distinct, symmetrical horizontal bands across the top and bottom edge.
Step 5: Refining the Hilt with Center Guards
Add the smaller, refined center guards that will meet the blade. Extend two small, symmetrical outward-pointing spikes or hooks from the very top center point of the scalloped pommel area, just between the quillons drawn in the previous step.
Step 6: Constructing the Blade Outline
Draw the primary outline of the dagger’s blade. The blade should be symmetrical, extending upwards from the top center of the hilt assembly. Use two gentle, elegant curves that taper significantly to form a sharp, distinct point at the top.
Step 7: Detailing the Central Blade
Draw a clean, vertical line precisely down the center of the entire blade from the hilt point to the tip. This creates the spine. Above the central hilt area, add the characteristic ‘M’ shape of a ricasso where the central blade meets the hilt structure, finalizing the metalwork detail.
Step 8: Applying Final Colors
The main blade should be colored a light, cool blue-gray. The handle grip and pommel end cap are painted a very dark charcoal gray. The crossguard, quillons, and the top and bottom handle segments are colored with a solid, dark teal-blue. Finally, the central section of the pommel and the small horizontal handle bands are painted with a dark purple-gray. The original outlines should be kept clean against the colored sections.
Step 1: Outline the Blade
Draw the long, sharp, and narrow shape of the blade, tapering to a point at the bottom.
Step 2: Add Guard Base Curves
Add two small, concave curved lines at the top of the blade to serve as the base for the crossguard.
Step 3: Draw the Crossguard
Extend the crossguard outward from the base with two wing-like shapes that curve downward, connecting to the sides of the blade.
Step 4: Refine the Guard Center
Add a small, sharp triangular detail at the center of the crossguard, sitting just above the blade base.
Step 5: Outline the Handle
Draw two vertical lines curving slightly outward to create the elongated shape of the handle above the crossguard.
Step 6: Add Handle Cap Detail
Draw a small, rounded horizontal band at the very top of the handle to separate the grip from the pommel.
Step 7: Finish the Pommel
Complete the top of the weapon by adding a larger, rounded pommel cap above the handle band, including a small nub at the very peak.
Step 8: Detail the Blade
Draw two internal lines running parallel to the edges of the blade, meeting at the tip to create the central ridge of the blade.
Step 9: Final Coloring
Color the handle in a muted olive green, and fill the blade, crossguard, and pommel cap with metallic grey tones to complete the drawing.
Step 1: Handle Outline
Begin by drawing the basic, contoured shape of the dagger’s handle. This initial form establishes the grip.
Step 2: Form the Pommel
Add a small, distinct rounded cap to the very end of the handle structure created in the previous step.
Step 3: Draw Guard Anchors
Draw two small vertical lines at the junction of the handle and the pommel cap to refine the final handle shape.
Step 4: Outline the Blade
Draw the full, double-edged blade. This line should connect to the bottom end of the handle and taper to a point at the top.
Step 5: Detail the Spine Lines
Draw two long, internal lines running parallel to the blade edges, meeting at the central spine.
Step 6: Add Handle Contours
Define the grip of the handle by drawing several horizontal curved lines, establishing a contoured grip texture.
Step 7: Refine Central Dagger Details
Add a complex set of internal lines along the central spine and base of the blade to define the fuller (the groove).
Step 8: Final Coloring
The drawing is now complete and ready for color. For the final version, the handle and the integrated crossguard are colored with a dark, muted blue-grey steel, while the double-edged blade is filled with a distinct medium-grey steel hue, making the etched fuller lines clear.
Step 1: Draw the Guard
Start by drawing the handguard of the dagger. Create a slightly curved horizontal shape with rounded ends to serve as the barrier between the handle and the blade.
Step 2: Outline the Handle
Below the guard, draw the main body of the handle. Create an elongated, oval-like shape that tapers slightly toward the guard and the pommel area.
Step 3: Add the Pommel
At the bottom of the handle, draw a small circle to represent the pommel, which acts as a counterweight at the end of the grip.
Step 4: Detail the Handle Wrap
Add two diagonal lines across the middle section of the handle to suggest a textured grip or a wrapped material design.
Step 5: Outline the Blade
Extend a long, sharp, triangular blade upward from the center of the handguard. Ensure the blade comes to a fine point at the top.
Step 6: Define the Blade’s Center Ridge
Draw a vertical line down the center of the blade, connecting the tip to the center of the guard. This adds depth and defines the sharp edges of the blade.
Step 7: Final Coloring
Complete the drawing by adding color. Use light blue for the blade to give it a metallic appearance. Color the guard a dark grey, the handle a brown, and the pommel a bright blue to finish the illustration.
Step 1: Draw the Crossguard
Start by drawing the crossguard, which is a horizontal piece with wider, curved ends and a thinner center section.
Step 2: Sketch the Blade Outline
Draw the long, pointed blade extending downwards from the center of the crossguard. The blade should be widest just below the guard and taper down to a sharp tip.
Step 3: Add the Blade Ridge
Draw a vertical line down the center of the blade to represent the central ridge, and connect the top ends of this line to the corners where the blade meets the guard.
Step 4: Construct the Handle
Draw the handle extending upwards from the crossguard, featuring a slightly contoured grip shape that widens near the top.
Step 5: Draw the Pommel
Draw a semi-circular pommel cap at the very top of the handle.
Step 6: Detail the Grip
Add decorative geometric patterns inside the handle, consisting of several horizontal lines and diamond shapes arranged vertically.
Step 7: Apply Colors
In the final stage, apply the colors to the drawing. Use grey for the crossguard and the entire blade. Color the handle using alternating sections of yellow and orange. Fill the pommel with a bright yellow.
Hopefully, this drawing tutorial on Dagger will help you easily create a nice drawing.
