You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a door with simple steps.
Let’s get started!
Step 1: Draw the Outer Frame
Start by drawing a large vertical rectangle. This will serve as the main outline or the “slab” of the door.
Step 2: Add the Four Main Panels
Inside the lower two-thirds of the door, draw four smaller vertical rectangles arranged in a 2×2 grid. Leave space between them for the “stiles” and “rails” (the wooden frame parts of the door).
Step 3: Create the Semi-Circle Window
Above the four panels, draw a horizontal line across the width of the door, then draw a semi-circle (half-moon shape) on top of it to create the window frame.
Step 4: Add Window Details (Sunburst Design)
Inside the semi-circle, draw a small half-circle at the bottom center. From that small half-circle, draw five straight lines radiating outwards to the edge of the large semi-circle, creating a sunburst or fan-like pattern.
Step 5: Draw the Door Handle
On the right side of the door, at the level of the middle cross-section, draw a small vertical rectangle (the backplate) and a circle in the center of it to represent the doorknob.
Step 6: Color the Drawing
Finally, add color to bring your drawing to life. Paint the main body of the door red. Color the four lower panels a darker shade of red to create depth. Fill the window panes with light blue to represent glass. Color the doorknob and backplate yellow or gold.
Step 1: Outline the Main Frame
Draw a single, large, vertical rectangle with slightly rounded corners in the center of the canvas. This will be the outer edge of the entire door.
Step 2: Add Panel Placement Boxes
Inside this black frame, draw two smaller, square-like rectangles. Place one in the upper-middle area and one in the lower-middle area, leaving a gap between them for the eventual doorknob.
Step 3: Define Inner Panel Linework
Draw smaller rectangles inside each of the two squares. This creates nested frames for the door panels. Make sure the inner line has a slight gap from the square line.
Step 4: Create Panel Beveling Lines
Draw short diagonal lines at the corners between the inner squares and their outer frames to create a 3D beveled effect.
Step 5: Position the Doorknob
On the left side of the door, in the space between the upper and lower panel, draw a small circle to place the doorknob.
Step 6: Finalize Color and Finish
Fill the entire surface of the door and the interior of the panels with a solid yellow color. The inner beveled areas of the panels should be filled with a darker olive-yellow shade to enhance the depth. Fill the doorknob circle with light gray.
Step 1: Draw the Outer Rectangle
Start by drawing a single large, vertical rectangle on a white background. This will serve as the extreme outer edge of the entire structure.
Step 2: Add the Main Door Frame
Inside the rectangle, draw a smaller rectangle, leaving a uniform border all the way around. This frame represents the main outer trim or casing of the door.
Step 3: Create the Inner Bevel lines
To form the inner frame of the door, add short, diagonal lines connecting the top two corners of the inner rectangle to the corresponding corners of the frame.
Step 4: Place the Door Hinges
On the left side of the inner door frame, add two small rectangular boxes, one in the top half and one in the bottom half. These mark the positions of the hinges.
Step 5: Define the Four Door Panels
Now, define the four central window panels. Draw four identical rectangles inside the main door space, arranged in a two-by-two grid, ensuring they are evenly spaced.
Step 6: Finish Panel Linework
Draw a new, smaller rectangle inside each of the four panel areas, leaving a small gap all around each.
Step 7: Position the Doorknob
On the right-hand side, just outside the rightmost door panels, draw a shape that looks like a vertical rectangle with a circle inside. This is the lockset and doorknob mechanism.
Step 8: Finalize with Color and Detail
Fill the main door body and panels with a light blue color. Fill the outer casing with a darker blue. Make the hinges and doorknob bright yellow.
Step 1: Draw the Outer Frame
Start by drawing a large vertical rectangle. This will serve as the primary outline for the door and its frame.
Step 2: Add Perspective Lines at the Bottom
At the two bottom corners of the rectangle, draw two short diagonal lines pointing outwards and downwards. These lines will create the depth for the doorstep.
Step 3: Complete the Doorstep
Connect the ends of the diagonal lines with a horizontal line. Then, draw a narrow rectangular base below it to complete the 3D look of the doorstep.
Step 4: Draw the Inner Door Outline
Inside the large rectangle, draw a smaller rectangle. Make sure to leave an even gap on the top and sides to represent the door frame. The bottom of this rectangle should sit directly on the doorstep.
Step 5: Add the Heart Window
In the upper center of the inner rectangle, draw a heart shape. This will be the decorative window for your door.
Step 6: Add the Doorknob
On the right side of the door, draw a circular doorknob. Below the circle, add a small, rounded vertical shape to represent the keyhole plate.
Step 7: Color Your Drawing
Finally, bring your drawing to life with color: Use brown for the outer frame and the doorstep. Use light orange or tan for the door itself. Color the heart bright red. Fill the doorknob with yellow to give it a gold or brass appearance.
Step 1: Start with the Base Platform
Begin your drawing by making a thin, wide, horizontal rectangle at the bottom of the page. This will represent the threshold or doorstep that the door sits on.
Step 2: Add the Basic Outer Door Frame
Starting from the base rectangle, draw a large vertical rectangle rising upwards. This outline defines the complete shape of the door and its outer frame.
Step 3: Define the Inner Door Shape
Inside the large vertical rectangle, draw a second, slightly smaller vertical rectangle. This creates the border for the actual door within its frame. Make sure to leave an even space on the top and sides.
Step 4: Place the Main Window Pane
In the top-center of the inner door, draw a simple square. This square serves as the primary shape for the door’s upper window.
Step 5: Create the Window Grid (Muntins)
Inside the square window pane, draw one vertical line down the middle and one horizontal line across the middle. This grid pattern divides the single square into four small, equal panes.
Step 6: Draw the Lower Door Panels
Move to the bottom half of the door. Below the window, draw four identical squares. Arrange them in two neat rows of two (a 2×2 grid) to create the raised or recessed door panels.
Step 7: Add the Doorknob
On the inner door, between the window and the lower panels on the right side, draw a single small circle. This circle will be the doorknob.
Step 8: Final Coloring and Detail
Now, add colors to finish. Use bright green for the main door surface and a darker green for the frame and doorstep base. Fill the lower four panels with the darker green to give them depth. Color the small doorknob yellow and fill the window panes with a very light blue for glass.
Step 1: Define the Outer Door Frame
Draw a tall, centered vertical rectangle using. This establishes the outermost boundary of the entire door unit.
Step 2: Add Inner Door Stile
Inside the existing red rectangle, draw a smaller, nested rectangle.
Step 3: Create Panel Separators
To define the recessed panel style, draw short diagonal lines across each top corner, connecting the corners of the inner and outer stiles
Step 4: Insert Top Panels
Select the top two rectangular sections. Inside each, draw a smaller, centered rectangle. This defines the raised (or recessed) molding profiles for the top two door panels.
Step 5: Insert Middle Panels
Move to the two middle rectangular sections. Within each, draw a larger, vertically elongated rectangle, matching the profile style from the step above.
Step 6: Insert Bottom Panels
Finally, go to the bottom two rectangular sections and repeat the process, drawing a large rectangle inside each to complete the molding outlines for all six panels.
Step 7: Add Letterbox Slot
Change your focus to the small horizontal area between the middle and bottom panel pairs. In this space, draw a single, centered horizontal rectangle. This outlines the position for the door’s letterbox.
Step 8: Add Door Handle and Keyhole
Identify the vertical stile on the right side, between the middle and bottom panels. Draw two circles: one larger circle for the doorknob base and a smaller circle below it for the keyhole. This completes the wireframe drawing phase.
Step 9: Apply Full Color and Shading
Fill the entire inner door surface with a bright yellow. For all six recessed (or raised) panels, use a darker olive-green to create depth. Fill the letterbox and both doorknob parts with solid grey. Now, the final, fully detailed, colored, six-panel door is complete.
Hopefully, this drawing tutorial on Door will help you easily create a nice drawing.
