You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a fountain with simple steps.
Let’s get started!
Step 1: Draw the Base Ellipse
Start by drawing a large, wide horizontal ellipse. This will serve as the top rim of the bottom basin.
Step 2: Add the Depth to the Base
Draw two short vertical lines downward from the left and right edges of the ellipse. Connect them with a curved line at the bottom to give the base a 3D cylindrical shape.
Step 3: Draw the Inner Rim
Inside the first ellipse, draw a slightly smaller ellipse to create the thickness of the basin’s wall. Add another small curved line inside to show the water level or the bottom depth.
Step 4: Sketch the Pedestal
In the center of the basin, draw two inward-curving vertical lines. Connect them at the bottom with a curve to form the stand (pedestal) that supports the upper bowl.
Step 5: Draw the Upper Bowl
On top of the pedestal, draw a wide U-shaped curve to create the bottom half of the upper fountain bowl.
Step 6: Close the Upper Bowl
Draw a long, thin ellipse across the top of the U-shape to close the bowl.
Step 7: Add Detail to the Upper Bowl
Just like you did with the base, draw a smaller ellipse inside the top bowl to create a rim and indicate where the water sits.
Step 8: Draw the Water Spray
From the center of the top bowl, draw vertical lines leading up to curved, droplet-like shapes splashing outward. This creates the effect of water spraying into the air.
Step 9: Color Your Drawing
Finally, add color! Use tan or light brown for the stone structure and bright blue for the water to bring your fountain to life.
Step 1: Draw the Top Ornament
Start at the very top by drawing a small circle. Underneath it, draw a rounded horizontal shape and two short lines curving outward to form the first small pedestal.
Step 2: Add the First Small Basin
Draw a wider, shallow bowl shape attached to the pedestal from the previous step. Add two more outward-curving lines below it to prepare for the next tier.
Step 3: Create the Second Basin Tier
Repeat the process by drawing a slightly larger bowl below the first one. Ensure the pedestal connecting the two bowls is centered.
Step 4: Draw the Third Basin Tier
Continue building downward by adding an even wider bowl. Draw the curved lines for the next pedestal section underneath this tier.
Step 5: Add the Largest Tier
Draw the final and largest bowl of the fountain structure. Add the base pedestal lines, which should be the widest ones yet to support the weight of the structure.
Step 6: Outline the Bottom Reservoir
Draw a large, wide horizontal ellipse around the bottom pedestal. This will serve as the top rim of the large ground-level basin.
Step 7: Give the Base Depth
Draw two vertical lines downward from the ends of the large ellipse. Connect them with a curved line at the bottom to give the base a solid, three-dimensional look.
Step 8: Add Water Ripples
Inside the large bottom basin, draw several wavy, horizontal lines. This creates the appearance of moving water filling the reservoir.
Step 9: Color the Fountain
Finish your drawing by adding color. Use a teal or light green for the stone structure and a bright blue for the water in the bottom basin to complete the look.
Step 1:
Start by drawing a wide, shallow “U” shape at the bottom of your page. This will form the base of the fountain’s bottom basin.
Step 2:
Close the top of the basin by drawing a long, thin oval (or a rounded rectangle). This creates the rim of the large bottom pool.
Step 3:
Draw two curved lines rising from the center of the bottom basin. These lines should curve inward slightly to form the first “pedestal” or neck of the fountain.
Step 4:
Add a smaller “U” shape sitting on top of the first pedestal. This will be the second tier (middle basin) of the fountain.
Step 5:
Just like in Step 2, draw a rounded rim across the top of the middle basin to complete the bowl shape.
Step 6:
Draw two more small curved lines rising from the center of the middle basin to create the second, smaller pedestal.
Step 7:
Add the smallest “U” shape at the very top. This is the third and final tier of the fountain structure.
Step 8:
Draw the final rounded rim on the top bowl. Your basic three-tiered fountain structure is now complete.
Step 9:
Draw the water! Add curved “arc” lines spraying out from the top and middle tiers. You can also add a few small circles near the bottom to represent water droplets or splashing.
Step 10:
Finally, color your drawing. Use shades of grey for the stone structure and a bright light blue for the flowing water to make it look realistic.
Step 1: Draw the Basin Base
Start by drawing the wide, outer basin that sits on the ground. Use two long horizontal lines connected by outward-curving sides to give it a sturdy, decorative look. Add a thin horizontal line near the top for detail.
Step 2: Begin the Center Pedestal
Draw two small, inward-curving lines in the center of the basin. This forms the bottom section of the pedestal that will support the upper structure.
Step 3: Add the First Pedestal Tier
On top of the lines you just drew, add a small, shallow bowl-like shape. This serves as the first decorative “collar” or tier of the central pillar.
Step 4: Extend the Pedestal Neck
From the center of that small tier, draw two more vertical, slightly curving lines upward. This creates the “neck” of the fountain’s middle section.
Step 5: Draw the Main Upper Bowl
Create the large, main water collection bowl. Use a wide, deep “U” shape that rests on top of the pedestal neck you drew in the previous step.
Step 6: Add the Bowl Rim
Draw a long, thin, oval-like shape across the top of the upper bowl. This represents the thick rim where water will eventually overflow.
Step 7: Add the Top Spout
On top of the main bowl, draw the final, smallest tier. This is the spout assembly where the water originates, featuring a small cap-like shape at the very peak.
Step 8: Draw the Water Streams
Now, draw the movement of the water. Add two large arcs curving out from the very top spout into the main bowl, and two straight lines representing water overflowing from the main bowl down into the large base basin.
Step 9: Color the Fountain
The final step is to add color. Use yellow or gold for the stone structure of the fountain and a bright cyan or light blue for the flowing water to bring the drawing to life.
Step 1: Draw the Base
Start by drawing a small, horizontal rounded rectangle or an oval at the bottom of your page. This will serve as the very bottom support of the fountain.
Step 2: Add the Lower Stem
Draw two short, vertical parallel lines rising from the center of the base. This creates the first part of the fountain’s central pillar.
Step 3: Draw the Large Basin
On top of the lower stem, draw a large, wide U-shape and close it with a flat horizontal line across the top. This forms the main lower water basin.
Step 4: Add the Upper Stem
Draw two more vertical parallel lines starting from the center of the large basin, extending upwards. This stem should be slightly taller than the first one.
Step 5: Draw the Small Basin
Add a second, smaller U-shape on top of the upper stem. Make sure it is narrower than the bottom basin to give the fountain a tiered look.
Step 6: Add the Water Sprays
Draw curved lines arching out from the very top. Draw dashed or dotted curved lines falling from the edges of the top basin into the bottom one, and from the bottom basin downwards.
Step 7: Color Your Drawing
The final step is to add color. Use a light blue for the water and the basins, and a darker blue for the central stems to create depth and contrast.
Hopefully, this drawing tutorial on Fountain will help you easily create a nice drawing.
