You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a French bulldog with simple steps.
Let’s get started!
Step 1: The Head Outline
Begin by drawing the basic, rounded square shape for the dog’s head. Imagine a square with very rounded corners and a slightly indented bottom edge, almost like the top of a cloverleaf.
Step 2: Add the Ears
From the top corners of the head shape, draw two large, wide, and upright ear shapes. The ears should look like a flattened ‘O’ or a kidney bean, with an outer curve and an inner inner line defining the ear flap.
Step 3: Define the Body
Draw two long, curved lines extending downwards from the head’s bottom corners, forming the front of the body and legs. At the very bottom, draw two small, distinct ‘U’ shapes on each leg to indicate the toes.
Step 4: Connecting the Bottom
Draw a gentle, upward-curving line to connect the two bottom-most points of the dog’s legs, defining the belly and completing the initial body shape.
Step 5: The Hind Legs
On the outside of each front leg, draw a large, outward-bulging curved line that swoops up and joins the side of the head, creating the powerful hind thighs. At the bottom of these curves, add the small ‘U’ shapes for the toes of the back paws.
Step 6: Start the Face
Within the lower half of the head, draw a large, rounded trapezoid-like shape that curves down and across, creating the base area for the muzzle and cheeks.
Step 7: Place the Eyes
Above the muzzle area you just drew, place two circles, one on each side, for the eyes.
Step 8: Detail the Muzzle
Inside the muzzle shape, add the nose at the very top. Then, draw the characteristic facial wrinkles, the jowls, and the smile line, along with a few small whisker dots. At this stage, your full line-art illustration is complete.
Step 9: Color and Final Touches
In the final step, color your drawing. Fill the main body and the top outer parts of the ears with a rich, tan or fawn color. Color the jowls and muzzle area with a light grey or silvery color. The very center of the nose should be colored dark grey. The inside of the ears should be filled with a soft, pinkish color. Finally, the eyes should be colored completely in black to make them pop.
Step 1: Outlining the Head
Start by drawing the primary outline for the dog’s head. It’s a rounded shape, wider at the cheeks and slightly narrower at the top, with an open gap where the ears will go.
Step 2: Drawing the Ears
From the two open points at the top of the head outline, draw the large, upright bat-like ears. Each ear should be an outer curve and an inner inner curve, giving them volume and definition.
Step 3: Creating the Front Legs
Extend two separate lines downwards from the lower part of the head, forming the outer contours of the two front legs. At the very bottom of each leg, create small, detailed ‘U’ shapes to depict the toes on each paw.
Step 4: Connecting the Bottom Contour
Draw a single, wide, upward-curving line to connect the space between the two new front paws, completing the lower body and belly contour.
Step 5: Adding Inner Hind Legs
On the inside of the front leg contours, draw two inner vertical lines for the inner side of the legs. Then, in the space between the legs, draw the contour lines for the feet.
Step 6: Wrinkle Details on the Forehead
Move to the head and draw four soft, curving parallel lines on the forehead to represent the dog’s characteristic wrinkles.
Step 7: Adding the Eyes
Position and draw two circles below the forehead wrinkles for the eyes, placing a small dot inside each for the pupils.
Step 8: Drawing the Muzzle and Smile
Below the eyes, create the distinct muzzle shape. At the very top center of this muzzle, draw the nose and the central philtrum. Add a few dots for whisker points and a soft, wide curving smile line.
Step 9: Final Colorization
Fill in the full illustration with color. The main body, outer ears, and paws should be colored in a solid dark grey-purple. The muzzle area and the inside of the large ears are a soft, light peach or light tan. The nose and the pupils of the eyes should be a very dark grey or black to finish the piece.
Step 1: Drawing the Basic Head Shape
Start by creating the initial outline for the head. This is an irregular, rounded shape that is wider at the bottom to form the jowls and narrower at the top. This shape will serve as the foundation for the entire drawing and is not a perfect circle, but more of a rounded square with a slightly wider base.
Step 2: Adding the Ears
From the top of the head outline, draw two large, bat-like ears. These ears are tall, wide, and have rounded tips, which is a key characteristic of the French Bulldog. Each ear should be a clean, large curve, connected directly to the top edges of the head shape created in the previous step.
Step 3: Drawing the Collar
Below the jowls and at the base of the head, add a curved band that wraps around the neck area. At the center of this band, draw a small hanging circle to represent the collar’s tag. This defines the separation between the head and what will become the body.
Step 4: Defining the Front Legs and Chest
Now, begin the outline for the body. From the collar, draw two vertical lines for the front legs, with small, curved paw shapes at the bottom. A curve between these legs defines the chest area. This step establishes the dog’s sitting pose from the front.
Step 5: Laying Out the Rear of the Body
Add a long, sloping curve starting from the back of the left ear, extending downwards and slightly outwards. This long line establishes the line of the dog’s back. In this step, a few additional guiding lines might be drawn to outline the general position of the rest of the body.
Step 6: Adding the Back Legs and Hips
On the side opposite the long back line, draw the rounded shape of the dog’s hip and the visible portion of its tucked-under hind leg and paw. A curved line connects this new hip area back towards the center of the body, just behind the front legs, detailing the dog’s full sitting posture.
Step 7: Finalizing the Back Outline
Refine the long curve from Step 5, ensuring it forms a single, smooth line from the ear all the way down to the tail area, mirroring the other side of the dog’s body.
Step 8: Adding the Tail
Where this back curve ends, add a very small, cute nubin tail. At this stage, the full sitting silhouette of the dog is complete.
Step 9: Drawing the Facial Features
Inside the head outline, draw the face. Create two large, round eyes positioned horizontally, with smaller circles inside for pupils. Below the eyes, draw a nose shape and a muzzle line. Then, draw the characteristic curved jowl lines on each side of the muzzle, connecting the features and forming the dog’s sweet, slightly frowny expression.
Step 10: Adding Color to the Final Drawing
The dog’s entire body and face are filled with a cool, medium gray. The large inner ears are a soft pink. The eyes are left with white highlights, a black pupil, and a small area for the iris. The nose is dark gray. The collar around the neck is a vibrant red, and the small tag hanging from it is a bright yellow.
Step 1: Outlining the Head and Jowls
Start by drawing the basic shape of the French Bulldog’s head. Begin with a curved line across the top, followed by irregular, rounded shapes for the wide cheeks and jowls. The bottom of the head should have a wavy, multi-lobed edge to create the characteristic folds and a little cleft in the chin.
Step 2: Drawing the Signature Ears
On top of the head outline, create the large, bat-like ears. These ears are tall, wide, and rounded at the tips. Draw two large, continuous curves for the outer ears, followed by smaller, echoing inner curves that show the structure of the ear canals. Each ear connects to the top edges of the head shape from the previous step.
Step 3: Beginning the Front of the Body
Below the head, on the dog’s left side, draw a short, curved line to establish the shoulder and neck. On the dog’s right side, draw a different, larger curve that starts from the lower jowl and curves inwards. This defines the front profile and helps separation between the head and body.
Step 4: Defining the Front Legs
Now, complete the first front leg. Add the inner lines and draw a paw shape with small toes at the bottom. A curve between the left and right sides of the body outlines the lower chest. Draw the inner line and paw shape for the right leg to establish the front standing pose.
Step 5: Beginning the Body and Hip Line
Add a long, sloping curve starting from the back of the left ear, extending downwards and slightly outwards to form the dog’s back. Near the end of this curve, draw a new line inwards to define the rear hip and establish the beginning of the body’s mass. This step builds the dog’s overall standing silhouette.
Step 6: Adding the Hind Legs
Complete the body by adding the hind legs and paws. Draw the rear outlines and paw shapes for both the left and right back legs. Connect the new hip line to the chest curve, showing the full standing form of the dog from a three-quarter perspective.
Step 7: Finalizing the Tail
Refine the back and hip outlines, ensuring they are smooth and continuous. At the very end of the back curve, just past the hind leg, add a small, adorable nub of a tail. This simple curve finalizes the main physical features of the dog’s body.
Step 8: Adding the Face and Facial Details
Inside the head shape, draw the facial features. Create two large, round eyes with smaller pupil circles. Add the iconic flat-faced muzzle with a brown nose, and a wide, friendly mouth curve complete with jowl lines and whiskers, creating a happy expression. This step brings the French Bulldog to life.
Step 9: Adding Color to the Final Drawing
The final step is to apply vibrant, flat colors to the drawing. The dog’s entire coat, including the body and outer head, is filled with a soft, cream-light pink color. The inner ears are a bright, delicate pink. The eyes are left with white highlights, and a brown nose is added. The inside of the mouth is a muted dark pink.
Step 1: Top of the Head
Start by drawing a wide, slightly wavy horizontal line. This will represent the very top of the dog’s head between the ears.
Step 2: Bat Ears
Add two large, upright ears on either side of the top line. The ears should be tall and rounded at the tips, resembling the shape of a bat’s wings. Add a smaller curved line inside each ear to show depth.
Step 3: Facial Outline
Draw a large, rounded “U” shape connecting the bottom of the ears to form the cheeks and chin. This gives the face its wide, sturdy structure.
Step 4: Forehead Wrinkles
Draw a series of short, curved lines in the center of the forehead. These represent the characteristic skin folds and wrinkles typical of the breed.
Step 5: The Eyes
Add two circular eyes positioned below the forehead wrinkles. Inside each eye, draw a smaller circle for the pupil and a tiny dot to represent a highlight or reflection.
Step 6: Eye Details
Draw thin, curved lines above and below each eye to create eyelids and additional facial folds, giving the dog an expressive look.
Step 7: Nose and Upper Lips
In the center of the face, draw a rounded, heart-shaped nose with two spiraled nostrils. Below the nose, add two wide, sweeping curves that extend outward to create the jowls or upper lips.
Step 8: Muzzle Folds and Chin
Draw two long, curved lines that frame the nose and mouth area, connecting the nose to the outer corners of the lips. Add a small, horizontal curve at the very bottom for the chin.
Step 9: Adding Color
Use a solid grey for the main face and outer ears. Use a soft pink for the inside of the ears. Color the irises a light blue with black pupils. Use a dark brown for the nose. A light pink can be used for the small visible portion of the tongue or lower lip.
Step 1: Head Top and Cheeks
Begin the drawing by forming the core of the face. First, draw a small, slightly curved, irregular line to represent the very top of the head. Below it, add a wide, deep, rounded bowl shape to create the basic form of the lower face and cheeks.
Step 2: The Large Ears
Add two very large, distinctive “bat ears” on either side of the head top line. These ears should be tall and broadly rounded at the tips. Draw an inner line inside each ear to show its hollow, rounded interior, adding a small ‘j-hook’ detail at the base of the left ear (dog’s left).
Step 3: Collar and Bone Tag
Now, draw a simple, curved band that acts as a collar, wrapping around the base of the neck. From the bottom-center of this collar, extend a simple link to attach a small, classic bone-shaped tag.
Step 4: Front Legs Outer Curves
Define the front boundaries of the dog’s body. Draw two long, smooth, outwardly curved lines, starting from the junction of the collar and neck and extending down towards where the front paws will be placed. This defines the chest and the front of the shoulders.
Step 5: Front Paws and Inner Legs
Complete the front legs. Draw the four-toed paws at the bottom of the curved lines from Step 4. Then, add the vertical inner lines for the front legs, leaving a space in the center. At this stage, also draw a small, separate, toed back paw on the dog’s right, to begin the back leg definition.
Step 6: Define the Body Width and Hindquarters
Broaden the lower body. Draw a large, wide, sweeping ‘C’ curve for the left side of the dog (the right in the picture), defining the width of the torso and the outer line of the hind leg. For the other side, add the large thigh curve of the back leg and draw the matching large back paw with toes.
Step 7: Chest and Belly Contour
Define the final contours of the seated pose. In the center between the front legs, draw a series of curved lines to represent the belly and the chest muscles where they are compressed in a seated position.
Step 8: Drawing the Facial Features
Now, add the detailed face. Draw two round eyes with pupils, adding small curved lines for wrinkles and highlights above and between them. Add a heart-shaped nose with coiled nostrils. Draw wide, smiling jowls (cheeks) below the nose, and a simple curve for the chin line.
Step 9: Adding Full Color
To complete the drawing, fill the image with color. The dog’s entire coat should be a light cream color. Fill the inside of the large ears with a soft pink. The eyes and nose are dark, charcoal-black. The dog’s collar is a bright, vibrant yellow, and the bone-shaped tag is a solid, warm orange. The background remains clean and white.
Hopefully, this drawing tutorial on French Bulldog will help you easily create a cute drawing.
