You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a gift box with simple steps.
Let’s get started!
Step 1: Draw the Lid
Start by drawing a wide, horizontal rectangle near the top of your page. This will serve as the lid of the gift box.
Step 2: Add the Box Body
Below the lid, draw a large square. Ensure the top of the square is slightly narrower than the lid so that the lid appears to hang over the edges.
Step 3: Start the Ribbon Loop
From the center of the top of the lid, draw a tall, curved shape that points upward and slightly to the right. This is the first part of the ribbon’s knot and loop.
Step 4: Complete the First Loop
Add a teardrop-shaped loop extending to the right from the base of the previous shape. Draw a smaller curved line inside it to give the ribbon some depth.
Step 5: Draw the Second Loop
On the left side of the center, draw a matching teardrop-shaped loop. Like the first one, include a small interior line to show the fold of the ribbon.
Step 6: Add the Ribbon Tail
On the far left, just behind the loop, draw a small rectangular shape angled downward to represent the end of the ribbon tail.
Step 7: Draw the Vertical Ribbon
Draw two parallel vertical lines running down the center of the lid and continuing all the way down the box body. This represents the ribbon wrapped around the gift.
Step 8: Add Polka Dot Patterns
Decorate the box by drawing several small circles on the surface of the gift. Place some full circles in the open spaces and some half-circles along the edges of the box for a natural look.
Step 9: Apply Finishing Colors
Finish your drawing by adding color. Use one shade for the box, a contrasting color for the ribbon and bow, and a bright, cheerful color for the polka dots.
Step 1: Draw the Bow’s Center
Start by drawing a small, rounded square-like shape. This will be the central knot for your gift’s bow.
Step 2: Add the Ribbon Loops
Extend two large, symmetrical teardrop loops from either side of the center knot. Make them look like they are slightly inflated. Then, inside each big loop, draw a smaller, similar loop to add detail and thickness.
Step 3: Attach the Ribbon Tails
From behind the bow loops, draw two long, graceful ribbon tails. One should curve to the left and the other to the right. Give the end of each tail a forked or notched V-cut pattern for a realistic look.
Step 4: Define the Top of the Present
Now, draw a four-sided shape, similar to a diamond or parallelogram, directly beneath the center of the bow and partially tucked under it. This shape represents the flat top surface of the box viewed from an angle.
Step 5: Draw the Vertical Sides
From the bottom point and the two side points of the top shape, draw three straight vertical lines pointing down. Make sure the front center line is the longest to create the 3D cube perspective.
Step 6: Draw the Vertical Ribbon on the Front
On the front-left vertical face of the box, draw two straight vertical lines spaced apart. This creates the vertical band of the ribbon that runs down one side.
Step 7: Draw the Vertical Ribbon on the Other Side
Repeat the last step on the other visible front vertical face of the box. Draw two more straight vertical lines, spaced the same distance apart, to create the ribbon band for that side.
Step 8: Add Color to Finish
The construction is complete! Now, bring your drawing to life by adding color. Use a bright blue for the box surfaces and a vibrant yellow for the bow and all parts of the ribbon. You can also vary the color shades slightly to add shading and depth.
Step 1: Draw the Lid Outline
Start by drawing a long, horizontal rectangle with rounded upper corners. This will serve as the top lid of your gift box.
Step 2: Add the Box Body
Beneath the lid, draw a large square or slightly vertical rectangle. Make sure the sides start a little bit inward from the edges of the lid so the lid appears to hang over the sides.
Step 3: Draw the Vertical Ribbon
Draw two parallel vertical lines running down the center of the box body. This creates the ribbon that wraps around the gift.
Step 4: Create the Ribbon Knot
At the very top center of the lid, draw a small semi-circle or a rounded “button” shape. This represents the central knot where the bow is tied.
Step 5: Add the Hanging Ribbon Ends
From the central knot, draw two long, wavy shapes flowing downwards over the front of the box. Finish the bottom of these shapes with a “V” shaped notch to give them a classic ribbon look.
Step 6: Draw the Bow Loops
Sketch two large, rounded loops extending outward from the central knot. Add a small curved line inside each loop to give the ribbon some depth and detail.
Step 7: Apply Final Details
Complete your drawing by adding a vertical stripe on the lid that aligns with the ribbon on the box. You can now fill in the different sections with your favorite shades to make the gift box stand out.
Step 1: Draw the Ribbon Knot
Start by drawing a small, rounded dome shape. This will be the central knot of the bow sitting on top of the gift box.
Step 2: Add the Bow Loops
From each side of the knot, draw a large, teardrop-shaped loop. Inside these loops, draw a smaller, similar shape to give the ribbon depth and a realistic fold.
Step 3: Draw the Lid Surface
Sketch a large, flat oval that goes behind the bow. This represents the top surface of the cylindrical lid.
Step 4: Form the Lid Depth
Draw two short vertical lines downward from the widest points of the oval, then connect them with a curved line that follows the shape of the top. This gives the lid its thickness.
Step 5: Draw the Box Body
Extend two longer vertical lines down from the bottom of the lid. Connect these at the base with a final curved line, completing the cylindrical shape of the box.
Step 6: Add the Left Ribbon
Draw two parallel lines starting from the central knot, extending across the lid, and then continuing straight down the left side of the box body.
Step 7: Add the Right Ribbon
Repeat the previous step on the right side. Draw two parallel lines from the knot, across the top, and down the front-right side of the cylinder.
Step 8: Finalize and Color
Clean up any overlapping lines so the bow looks like it is sitting on top of the ribbons. You can now fill in the different sections with contrasting colors to make your gift box look festive.
Step 1: Draw the Lid Bottom
Begin the drawing with a simple, horizontal, oblong rectangle that will serve as the bottom edge of the gift box lid. This single shape establishes the perspective and position for the entire box.
Step 2: Form the Lid Top
On top of the rectangle from Step 1, add a smaller, centered parallelogram to form the lid’s top surface. Connect the corners of this parallelogram to the corners of the lid’s bottom to define the three-dimensional, trapezoidal form of the complete lid.
Step 3: Sketch the Box Body
Below the lid structure, draw a square with rounded corners to form the main container portion of the gift box. This shape should be centered under the lid, positioned so the lid rests precisely on top.
Step 4: Start the Bow’s Center
Mark the top surface of the lid with a small, rounded oval shape, similar to a jelly bean. Position this on the slanted plane to establish the center knot for the bow.
Step 5: Construct the Bow Loops
From the central knot oval created in Step 4, draw two large, rounded loop shapes that extend outward and slightly upward. These loops should look symmetrical and sit directly on the lid surface.
Step 6: Define the Ribbon Ends
Extend two ribbon ends upwards from the top edge of the bow knot and behind the loops. Shape each with a decorative ‘V’ notch at its peak.
Step 7: Add the Vertical Ribbon Band
Extend two straight, parallel lines from the bottom of the bow’s knot down the center of the rounded box body. These lines represent the ribbon band wrapped vertically around the gift.
Step 8: Detail with confetti pattern
Scatter small, irregular triangular shapes over the front and top surfaces of the gift box to simulate a festive confetti or triangle-patterned wrapping paper. Ensure the triangles are distributed naturally and avoid placing them on the ribbons.
Step 9: Add the final touch of color
Complete the illustration by filling in the shapes with color. Select a bold shade like bright purple for the box and lid, and a contrasting color like teal-cyan for the entire ribbon and bow. Use bright yellow to make the small triangles pop against the purple.
Step 1: Draw the Lid
Begin by drawing a simple, horizontal rectangle with rounded corners to represent the lid of the gift box. This shape establishes the basic structure and position.
Step 2: Add the Box Body
Next, draw a larger rectangle with rounded corners beneath the lid. Position it so it is slightly wider than the lid, making the box look complete and substantial.
Step 3: Draw the Bow Knot
Add a small, rounded oval shape centered just above the top edge of the lid. This will serve as the central knot for the bow.
Step 4: Add the Bow Loops
From the central knot, draw two large, rounded loop shapes that extend outward and slightly upward, sitting just above the lid. The loops should be symmetrical to give the bow a neat appearance.
Step 5: Form the Ribbon Tails
Extend two wavy, pointed ribbon tails upwards from the top edge of the bow knot, positioning them behind the loops for a layered effect. Give the tails a small notch at the tips.
Step 6: Define the Vertical Ribbon
Extend two straight, parallel lines vertically from the bottom edge of the bow knot to the base of the box body. This represents the ribbon band wrapped around the gift.
Step 7: Sketch the Polka-Dot Pattern
Scatter small, simple circle shapes across the front face of the box body and the visible front edge of the lid. Distribute them evenly to create a classic polka-dot pattern on the wrapping.
Step 8: Apply the Final Colors
Complete the drawing by filling in the shapes with vibrant colors. Choose bright blue for the box body and lid, and a bold green for the entire bow and ribbon band. Use contrasting red to color in all the polka dots, making the gift look festive and wrapped.
Hopefully, this drawing tutorial on Gift Box will help you easily create a nice drawing.
