You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a globe with simple steps.
Let’s get started!
Step 1: Draw the Basic Circle
Start by drawing a large, perfect circle in the center of your page. This will serve as the main body of the globe.
Step 2: Add the Axis Pins
Draw two pairs of short, parallel lines at the top-left and bottom-right of the circle. These represent the axis where the globe connects to its frame. Notice they are tilted at an angle.
Step 3: Create the C-Shaped Frame
Draw a thick, curved C-shaped arm (the meridian) that connects the two axis pins. This frame should follow the curve of the circle but leave a small gap between the frame and the globe.
Step 4: Draw the Stand Neck
At the very bottom of the C-shaped frame, draw a small vertical rectangle. This will be the neck that connects the frame to the base.
Step 5: Add the Base
Underneath the neck, draw a wide, curved triangle or a flattened cone shape. This forms the sturdy base that holds the globe upright.
Step 6: Outline the Continents
Inside the circle, lightly sketch the outlines of the continents. In this view, you can see the Americas on the left and parts of Europe and Africa on the right. Keep the lines wavy and irregular to look like natural coastlines.
Step 7: Color Your Drawing
Finally, add color to bring your globe to life. Use blue for the oceans, green for the land/continents, and brown for the frame, neck, and base.
Step 1: Draw the C-Shaped Frame
Begin by drawing a thick, C-shaped double outline. This represents the meridian arm of the globe stand.
Step 2: Add the Connecting Neck
At the center of the bottom curve of the frame, draw a small “U” shaped connector. This piece will join the frame to the base.
Step 3: Create the Stand Base
Draw a semi-oval or dome shape attached to the bottom of the “U” connector to complete the base of the stand.
Step 4: Sketch the Axis Pins
Add two pairs of short, parallel lines protruding inward from the top and bottom tips of the C-frame. These represent the mounting pins where the globe will rotate.
Step 5: Draw the Main Circle
Inside the frame, draw a large perfect circle that touches the two axis pins you just created. This is the body of the globe.
Step 6: Outline the Landmasses
Sketch wavy, irregular shapes inside the circle to represent different continents. You can place them randomly to create a stylized world map.
Step 7: Apply Color
Finish your drawing by adding color. Use yellow for the frame and stand, blue for the ocean areas, and green for the landmasses.
Step 1: Draw the Meridian Arm
Start by drawing two parallel curved lines to form a C-shape (semicircle). This represents the metal or plastic arm that holds the globe in place.
Step 2: Add the Bottom Pivot
At the bottom center of the curved arm, draw a small U-shaped bracket. This will serve as the connection point between the arm and the base.
Step 3: Draw the Base
Below the bracket, draw a dome-shaped base (a semicircle with a flat bottom). This provides the foundation for your globe stand.
Step 4: Add the Axis Caps
At the top and bottom tips of the C-shaped arm, draw two small rectangular caps with rounded edges. These represent the axis points where the globe will rotate.
Step 5: Draw the Sphere
Inside the frame you’ve created, draw a large, perfect circle. Make sure the circle touches the top and bottom axis points so it looks like it is mounted on the stand.
Step 6: Sketch the Continents
Inside the circle, draw several wavy, organic shapes to represent the continents. You don’t need to be perfectly accurate; simple “blob” shapes will give the impression of landmasses.
Step 7: Color the Illustration
Finally, add color to bring your drawing to life. Paint the landmasses green. Fill the rest of the circle (the ocean) with blue. Color the stand and the meridian arm grey to give it a metallic look.
Step 1: Draw a Large Circle
Begin by drawing a large, perfect circle in the center of your page to represent the body of the globe.
Step 2: Add the Axis Pins
Draw two small U-shaped pins on the top left and bottom right sides of the circle. These represent the axis around which the globe rotates.
Step 3: Draw the Meridian Arm
Connect the two pins by drawing a curved line that follows the outer edge of the left side of the circle. This forms the support arm of the stand.
Step 4: Add the Neck of the Stand
At the bottom center of the globe, draw a small rectangular shape with curved sides. This will act as the neck connecting the arm to the base.
Step 5: Draw the Dome Base
Underneath the neck, draw a dome-shaped base with a flat bottom to finish the stand for the globe.
Step 6: Add the Equator Line
Draw a curved horizontal line across the middle of the circle to represent the equator.
Step 7: Sketch the Continents
Inside the circle, draw various irregular, wavy shapes to represent different continents and islands across the world.
Step 8: Color the Illustration
Finally, fill your drawing with vibrant colors. Color the water cyan or light blue. Use different colors like pink, orange, and green for the landmasses. Paint the entire stand and meridian arm gold or yellow.
Step 1: Draw the Main Circle
Start by drawing a large, perfect circle in the center of your page. This will represent the Earth (the sphere of the globe).
Step 2: Add the Meridian Arm
Draw a curved, C-shaped frame around the right side of the circle. This part represents the metal or plastic arm that holds the globe in place, allowing it to spin.
Step 3: Sketch the Support and Base
At the bottom of the meridian arm, draw a small connecting piece (the spindle) and a flat, oval-shaped base. This gives your globe a sturdy foundation to stand on.
Step 4: Refine the Connecting Spindle
Add detail to the small joint that connects the curved arm to the base. This should look like a small U-shaped bracket or a short neck sitting right above the oval base.
Step 5: Define the Base Thickness
Add a second line to the oval at the bottom to give the base some depth and dimension. This makes the stand look 3D rather than just a flat line.
Step 6: Outline the Continents
Inside the large circle, draw various organic, wavy shapes to represent the continents and islands. You don’t have to be geographically perfect—just focus on creating interesting “blob” shapes spread across the sphere.
Step 7: Color Your Illustration
Finally, bring your drawing to life with color! Use light blue for the ocean. Use various shades of green, brown, and yellow for the landmasses. Color the stand and frame with gold, silver, or grey to give it a metallic look.
Step 1: Draw the Basic Circle
Start by drawing a perfect circle in the center of your page. This will represent the main body of the globe. Using a compass or a circular object to trace can help keep it neat.
Step 2: Add the Attachment Points
Draw two pairs of small, parallel lines at the top right and bottom left of the circle. These will serve as the connection points where the globe attaches to its meridian (the support arm).
Step 3: Create the Meridian Arm
Draw a curved, C-shaped frame that wraps around the right side of the globe. This frame should connect the top and bottom attachment points you drew in the previous step.
Step 4: Draw the Mounting Post
At the very bottom of the meridian arm, draw a small rectangle or square. This acts as the neck that connects the globe’s frame to its decorative base.
Step 5: Sketch the Base
Add a sturdy base at the bottom. Start with a flared shape (like a bell) and finish with a flat, oval-like pedestal to give the globe stability.
Step 6: Add Latitude Lines
Inside the circle, draw several slightly curved horizontal lines. These represent the lines of latitude. Make sure they curve slightly downward to give the globe a three-dimensional, spherical look.
Step 7: Add Longitude Lines
Draw vertical curved lines that meet at the top and bottom attachment points. These are the lines of longitude. By crossing these with the latitude lines, you create a grid pattern across the sphere.
Step 8: Color the Illustration
The final step is to add color! Fill the sphere with light blue to represent the ocean. Color the meridian arm gold or yellow. Use brown or bronze for the base to give it a classic, wooden or metallic look.
Hopefully, this drawing tutorial on Globe will help you easily create a nice drawing.
