You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a hat with simple steps.
Let’s get started!
Step 1: Start with a Simple S-Curve
The foundation of your fedora starts with a single, flowing line. Draw an elongated “S” curve that dips in the center and rises on either end, establishing the basic contour for the crown of the hat.
Step 2: Define the Crown and Crease
From the left end of your initial S-curve, draw another line that curves upward and to the right, meeting the S-curve near its peak. This new line defines the front side of the crown. Next, draw a slightly curved line connecting the beginning of the S-curve to its highest point, creating the characteristic central crease on top of the hat.
Step 3: Establish the Base of the Crown
Draw a long, smoothly curved line that connects the bottom of the front-crown line (drawn in Step 2) with the rightmost point of the initial S-curve. This line forms the lower perimeter and base of the crown, giving the hat its rounded shape.
Step 4: Draw the Hat Band
Inside the hat body you’ve defined, draw two parallel lines that curve across the lower section of the crown, following its contour. Start these lines on the left side, slightly above the lowest edge of the crown, and curve them smoothly to the right, completing the band.
Step 5: Define the Outer Brim
From the left edge of the hat’s body, draw a large, gentle curve that swept outwards and then downwards, creating the outer perimeter of the brim. This curve should wrap around, following the contours established by the base of the crown, and end at the right edge of the hat.
Step 6: Refine the Brim Detail
To give the brim its realistic, dimensional look, draw another smooth, slightly curved line along the bottom-right edge of the brim. This line should be close to the initial brim outline, adding texture and creating the subtle curl, separating the upper part from the far edge.
Step 7: Add Color and Final Details
The final step is to fill your fedora with color! Use a light beige or tan color for the main body and brim of the hat. For a classic touch, color the entire hat band a medium gray. Make sure your colors are solid and stay within the lines, completing your stylish fedora as shown in the final colored illustration.
Step 1: Drawing the Core of the Bow
Start by sketching a central rectangular shape to form the knot of the bow. Then, draw two large, rounded loops extending outwards from each side of the knot to create the main bow structure, ensuring one loop appears slightly behind the other for depth.
Step 2: Adding the Bow Tails
Next, attach two ribbon tails to the bottom of the central knot. Make them flow downwards and curve slightly, with the ends cut in a ‘V’ or fishtail shape. These details add a realistic look to the finished bow.
Step 3: Creating the Hat Band
Now, draw a long, slightly curved rectangular strip that represents the ribbon band of the hat. Position it so it attaches to the left side of the previously drawn bow. The band should follow the intended curve of the hat’s crown.
Step 4: Shaping the Hat’s Crown
To create the head section of the hat, sketch a large, smooth dome shape rising from the top edge of the ribbon band. This completes the main structure of the crown.
Step 5: Forming the Hat Brim
Next, add the brim of the hat. Draw a wide, flowing, wave-like shape around the base of the crown. Extend it much further on the left and right sides, giving the hat a wide, sun-hat style. Make sure the lines connect seamlessly to the base of the crown and around the back of the bow.
Step 6: Adding Under-Brim Detail
To create depth and show the tilt of the hat, draw a curved line along the lower-left edge of the wide brim you just created. This line should represent the thickness of the brim or the view from underneath, making the hat appear more three-dimensional.
Step 7: Finalizing and Adding Color
Once your lines are complete, color the main body of the hat, including the crown and the top of the wide brim, in a bright, warm yellow. The under-brim area should be a slightly darker, muted yellow-brown. The ribbon band around the crown and the entire bow and its tails are to be colored a vibrant red, making them stand out as the key detail.
Step 1: Start with the Bow
The first step in drawing this stylish hat is to establish the decorative bow. We’ll begin by drawing a central node and then expanding outwards. Carefully draw two symmetrical loops for the main part of the bow, each with soft, flowing folds. Below these, add two graceful tails that flare slightly at the bottom, mimicking tied fabric.
Step 2: Add the Hat Band
Next, we extend a flowing band from the central node of the bow, which will eventually wrap around the crown of the hat. This band should curve gently and feature distinct parallel lines, suggesting the texture of a ribbon or fabric band. Make sure it follows a natural path that aligns with the angle of the bow.
Step 3: Define the Hat’s Crown
Draw a prominent, rounded dome shape above the band you created in Step 2. This represents the crown of the hat, and its form should be smooth, with a subtle dent or crease at the top. This crown should connect naturally to the existing hat band.
Step 4: Establish the Outer Brim
Define the front and most of the side circumference of the wide brim. Start a continuous, graceful curve that begins near the bow, sweeps forward, and then sweeps all the way around, creating the large, flowing boundary of the hat’s structure.
Step 5: Finish the Back Brim Structure
To complete the shape of the brim, we need to draw the back edge and show its angle. Draw a curve that connects the outer edge of the brim back to the main body of the hat. This new line should be drawn in a way that suggests the back of the brim is tilted slightly upwards or viewed from a different perspective, giving the hat its three-dimensional feel.
Step 6: Add the Refined Brim Edge
For the final line work, we refine the edge of the brim by drawing a clean, continuous line just inside the entire outer boundary we established in Steps 4 and 5. This creates a defined, polished rim around the entire hat. Additionally, make sure to add the internal lines on the brim’s underside, mirroring the perspective established in the previous step.
Step 7: Apply Vivid Colors
The structure is complete, so let’s make it colorful! To achieve the final look, fill the main body and the wide brim of the hat with a bright, vibrant turquoise or teal. The decorative hat band and the entire bow (both the loops and tails) should be filled with a rich, shocking magenta or fuchsia. For the finishing touch, apply a vivid, cool cyan or sky blue to the defined edge rim of the brim.
Step 1: Draw the Top Button
Start your drawing near the top center of your canvas by sketching a small, flat oval shape. This represents the fabric button that sits directly at the apex of a standard baseball cap.
Step 2: Form the Main Crown
From the left and right sides of the top button, draw two long, sweeping curves that drop down to create a large dome shape. Connect the bottom edges of these curves with a slightly wavy horizontal line that dips in the center and rises toward the right. This completes the main shell or crown of the cap.
Step 3: Outline the Lower Rim of the Visor
To begin building the forward-facing visor (brim), move down to the lower left edge of the crown. Sketch a long, smooth, undulating curve that sweeps downward, loops around to the right, and arches upward to establish the bottom perspective of the visor.
Step 4: Complete the Visor Structure
Connect the sweeping line from the previous step back to the lower right side of the main crown. Draw a smooth, descending curved line from the crown’s right edge down to meet the tip of the visor, then add a tiny curved line underneath to give the brim thickness and a distinct three-dimensional lip.
Step 5: Draw a Decorative Star
Add a personalized detail to the right side of the cap’s crown. Sketch a neat, upright five-pointed star icon directly onto the fabric surface just above where the crown meets the visor.
Step 6: Sketch the Panel Seams
A baseball cap is made of stitched fabric sections. From the base of the top button, draw two vertical, slightly curved lines extending all the way down to the bottom rim of the crown. One line should run down the left side, and the other should pass directly through the center of the decorative star, separating the cap into panels.
Step 7: Add Air Ventilation Eyelets
Inside each of the three visible front fabric panels, draw a small, neat circle near the upper section. These represent the small embroidered eyelet holes that provide ventilation on a real cap.
Step 8: Detail the Visor Trim
Enhance the texture of the front brim by drawing two parallel curved lines that run alongside the inner edge of the visor. These lines mimic the decorative rows of stitching typically found on cap brims.
Step 9: Apply the Final Colors
Paint the entire crown, the top button, and the main surface of the visor in a bright, bold royal blue. Color the three small circular eyelets and the decorative five-pointed star in a solid, bright golden yellow. Fill the narrow stitched band running along the edge of the visor with a rich, dark navy blue to create a beautiful contrast.
Step 1: Establishing the Crown Shape
Draw a single, wide, curved line that arches high and slightly wider on the sides, forming the basic profile of the top of a large hat crown. The ends of this line should point slightly downwards, defining the bottom boundary for this part.
Step 2: Defining the Hat’s Indentation
On the existing crown profile, add a new, wavy, dip-like line inside and below the highest arch, creating a specific indentation or crease along the left and central top of the crown structure.
Step 3: Creating the Hatband Base
Connect the lower ends of the established crown shape with a shallow, parallel, double-line band. This creates the bottom edge and the foundation for a fabric hatband that wraps around the base of the crown.
Step 4: Drawing the Wide Brim
Starting from the outer edges of the hatband you just created, extend two very large, wide, curved lines downwards and outwards to meet in a broad, sweeping curve. On the left side, form a slightly pointed flare, shaping the vast brim that characterizes this style of hat.
Step 5: Adding Brim Perspective
Refine the perspective of the brim by drawing a long, clean diagonal curve across the left side, connecting the lower front edge back towards the band, creating the folded-up side of the wide brim.
Step 6: Attaching the Chin Strap
From underneath the brim’s curve, draw a simple U-shaped curve. From the lowest point of this curve, drop two straight, parallel lines downwards, and add a small circle as an adjuster or knot where the U-shape meets the vertical lines.
Step 7: Final Coloring
Complete the drawing by adding final color. Fill the main body of the entire hat (crown and brim) with a warm, dusty terracota or brown-pink hue. Color the fabric hatband a slightly darker, contrasting shade of brown. The chin strap should remain simple, outlined lines with a white fill for the adjuster.
Step 1: Draw the Hat Buckle
Start by sketching a slightly tilted, open-centered rectangle near the lower right area. This will serve as the buckle or decorative piece on the hat’s ribbon band.
Step 2: Form the Ribbon Band
From both sides of the buckle, extend two smooth, upward-curving lines out to the left and a shorter set to the right. Close the ends to create a continuous decorative band that anchors the base of the hat’s crown.
Step 3: Outline the Front Left of the Crown
Starting from the far-left edge of the ribbon band, draw a tall, vertical curved line that arches upward and then glides horizontally to the right. This outlines the prominent front peak and top slope of the crown.
Step 4: Complete the Right Side of the Crown
From where you left off on the top slope, continue drawing a diagonal line downward to connect with the upper-right edge of the ribbon band. Also, add a single crease line slashing diagonally across the middle of the crown.
Step 5: Sketch the Flat Oval Brim
Draw a large, wide oval shape looping all the way around the base of the crown and ribbon band to form the hat’s classic protective brim.
Step 6: Add Internal Shading Lines and Details
Refine the structure by adding detail lines: draw a fine trim line running just inside the edge of the brim, add a line mapping out the top fold of the hat, and outline a large oval indentation on the right side of the crown to create realistic depth.
Step 7: Apply Final Colors
Complete the artwork by filling it with solid colors. Color the main body of the hat—including the crown and the brim—a warm, light ochre or camel brown. The creased indentation at the top-left and the side fold on the right should be shaded with a distinctly darker medium-brown tone to depict shadow. Finally, color the entire wrap-around ribbon band and its buckle block a dark, solid chocolate brown.
Hopefully, this drawing tutorial on Hat will help you easily create a nice drawing.
