You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a hermit crab with simple steps.
Let’s get started!

Step 1: Draw the Eyes
Start by drawing two small circles next to each other. These will be the outlines for the eyes.

Step 2: Add the Eyestalks
Below each eye, draw a short, curved line to begin forming the eyestalks.

Step 3: Draw the Head/Body Outline
Connect the bottoms of the eyestalks with a large oval or circle to form the main part of the crab’s body/head.

Step 4: Add the Face
Draw a simple, upward-curving line (like a “D” shape) inside the body for a smiling mouth.

Step 5: Start the Legs
On either side of the body, draw two short, slightly curved lines sticking out. These will serve as guides for the smaller legs.

Step 6: Draw the Claws (Chelipeds)
On the left and right sides of the body, draw the large, prominent claws. They should connect to the body with short segments. Make sure to give them the distinct pincer shape.

Step 7: Draw the Shell Outline
Above and behind the crab’s body, draw the large, conical, spiral shell. Use concentric, curving lines to give it a layered, winding appearance, with a pointed top.

Step 8: Add the Walking Legs
In the lower center, beneath the head/body and between the large claws, draw four smaller, pointed legs.

Step 9: Color the Drawing
Color the shell a bright yellow (or any color you like), the body and claws a vibrant red, the eyes black.


Step 1: Draw the Eyes
Start by drawing two circles side-by-side, which will be the eyes. Inside each circle, draw a crescent shape to represent a reflection or pupil.

Step 2: Connect the Eyes
Draw a short, straight line between the two eyes to connect them, giving the appearance of glasses. Then, draw a large, curved line underneath the eyes. This begins to form the top of the crab’s head.

Step 3: Start the Claws
On the ends of the large curved line from Step 2, draw two small upward-curving arcs on the left and right. These will serve as the base for the claws.

Step 4: Outline the Claws
Draw the main shape of the two large claws. Each claw should be a curved, mitten-like shape extending downwards and slightly inwards, with a small notch or curve where the pinching part would be.

Step 5: Add the Mouth
Draw a small, gentle downward-curving line between the two claws. This line helps define the bottom of the body.

Step 6: Complete the Face
Draw a small, upward-curving smile above the line you drew in the previous step. The head and the main body portion are now complete.

Step 7: Draw the Small Legs
Draw two short, segmented leg sections coming out from the sides of the body, just behind the large claws. You should draw one on the left and one on the right.

Step 8: Add More Legs
Draw the remaining legs. On both the left and right sides, draw three longer, segmented legs extending outwards. Ensure these legs have a pointed or tapered end.

Step 9: Draw the Shell
Draw a large, spiral-shaped shell resting on top of the crab’s body. The shell should be wide at the base and taper to a point at the top, with curved lines to indicate the spiral segments.

Step 10: Color the Hermit Crab
Finally, color your drawing! Use red for the crab’s body and legs, and a light tan or beige color for the spiral shell. Add a touch of white to the eyes to complete your cute hermit crab.


Step 1: Draw the Shell Outline
Begin by drawing the main shape of the spiral shell. Draw several connected, curved sections that decrease in size from left to right, ending in a small oval at the tip.

Step 2: Add Shell Texture
Draw short, curved parallel lines across the surface of the shell sections. This adds texture and definition to the spiral segments.

Step 3: Draw the Body/Head
Draw a semi-circle or large arc emerging from the front (left side) of the large shell. This represents the crab’s head and the visible part of its body.

Step 4: Start the Eyestalks
Draw two small, curved lines extending upward from the top of the crab’s head/body (the semi-circle). These are the beginnings of the eyestalks.

Step 5: Draw the Eyes
On top of the eyestalks, draw two small circles for the eyes. Inside each eye, draw a crescent shape for the pupils.

Step 6: Add Eyebrows/Detail
Draw short, curved lines above each eye. These lines function as simple eyebrows, adding character to the crab’s face.

Step 7: Draw the Walking Legs
Draw two pairs of segmented walking legs extending downwards and forwards from the body, just below the head. Each leg should consist of two connected oval or rounded segments.

Step 8: Draw the Small Claw
Draw the small claw on the front-left side of the body. This claw should be rounded with a pinchers opening at the end.

Step 9: Draw the Large Claw
Draw the large claw on the front-right side, slightly higher and often used to block the shell opening. This claw should be drawn with a raised arm and a prominent, rounded pincher.

Step 10: Color the Hermit Crab
Color the drawing! Use red for the crab’s body, legs, and claws, and a light tan or beige color for the protective shell. Fill in the eyes with white, leaving the pupils black.


Step 1: Start the Head Shape
Draw two small, touching downward-curving arcs. These will form the top bumps for the crab’s eyes/eyestalks.

Step 2: Complete the Head
Connect the two arcs with a large, wide, and shallow upward-curving line. This completes the basic, rounded shape of the crab’s head and body.

Step 3: Draw the Claws
Draw the two front claws emerging from the bottom sides of the body. Each claw is an oval or rounded shape that tapers inwards at the bottom to form the pinching segment.

Step 4: Add Walking Legs
Draw one short, segmented leg on each side, just behind the main claws. These legs typically show two rounded segments.

Step 5: Draw the Face
Draw two small circles for the pupils inside the upper bumps of the head, and add a small, upward-curving line (a smile) in the center of the body.

Step 6: Draw the Shell Outline
Draw the large, segmented shell sitting on top of the crab’s head. The shell should be wide at the base and taper upwards, drawing three large, curved, and stacked segments.

Step 7: Complete the Shell Top
Draw the final, smallest segment at the very top of the shell to complete the spiral structure.

Step 8: Add Shell Texture
Draw vertical, tear-drop shapes or curved lines running down each large segment of the shell. This adds a ridged, bumpy texture to the shell.

Step 9: Color the Hermit Crab
Color the drawing! Use red for the crab’s body, legs, and claws, and a golden yellow or tan color for the shell and its texture lines.


Step 1: Draw the Head and Body Base
Draw a wide, almond or oval shape lying on its side. This will be the main part of the crab’s head and body.

Step 2: Add Eyes
Draw the main body shape in black. Inside this shape, draw two small circles for the eyes near the top.

Step 3: Start the Claws
Draw two short, upward-curving lines emerging from the left and right sides of the body outline. These form the base joints for the large claws.

Step 4: Outline the Claws
Draw the two large, mitten-shaped claws extending downwards from the joints. Keep them rounded and simple.

Step 5: Detail the Pinchers
Draw a small, curved triangle or arc at the bottom tip of each claw to indicate the pincher.

Step 6: Draw the Small Legs
Draw two pairs of small, segmented legs emerging from the sides of the body, just behind the large claws. These should look like two connected lines/segments on each side.

Step 7: Draw the Long Legs
Draw the two longer walking legs on each side. These legs are longer, thinner, and segmented, extending outwards and downwards from behind the small legs.

Step 8: Draw the Shell
Draw the large, segmented shell sitting on top of the crab’s head. Draw three or four stacked, curved segments, tapering to a point at the top.

Step 9: Color the Hermit Crab
Color your drawing! Use a vibrant red/orange for the crab’s body, legs, and claws, and a contrasting orange/tan color for the shell.


Step 1: Outline the Shell Shape
Draw the large, rough outline of the shell. It should be a large, asymmetrical oval or kidney shape with a slightly jagged top edge to suggest the spiral.

Step 2: Add Shell Segments
Draw six curved parallel lines across the shell to define the spiral segments. Make them follow the curve of the outline.

Step 3: Draw the Eyestalks
Draw two stalks emerging from the front opening of the shell. Each stalk should have a small circle at the end for the eye.

Step 4: Start the Large Claw
Draw the main segment of the large claw (the one covering the opening) below the eyestalks. This segment should be rounded and have a jagged, irregular edge to indicate the pincher.

Step 5: Draw the Small Claw
Draw the small claw below the large claw. This one should also have a distinct, jagged-edged pincher and be slightly smaller.

Step 6: Add Abdomen Legs
Draw four or five small, curved legs emerging from the back underside of the crab, just where the shell meets the body. These are the smaller appendages used for holding the shell.

Step 7: Color the Hermit Crab
Color your drawing! Use a brown or tan color for the shell and a red color for the crab’s body, claws, and legs.

Hopefully, this drawing tutorial on Hermit Crab will help you easily create a cute drawing.