You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a key with simple steps.
Let’s get started!
Step 1: Draw the Top Head
Start by drawing a large, central arc for the top of the key head. The sides should curve inwards slightly and then outwards again, creating a distinctive rounded, scalloped shape.
Step 2: Add the Neck Swells
Now, add the rounded curves for the neck of the key on both the left and right sides, just below where the head curves inwards. This defines the transition to the key blade.
Step 3: Draw the Blade and Tip
Extend a long straight line down from the left neck curve to form the left edge of the blade. At the bottom, draw a sharp V-shape for the key tip.
Step 4: Complete the Blade Profile
Draw the right edge of the blade. This side should feature a distinct series of irregular, blocky notches or bittings from top to tip, matching the mechanical cutouts.
Step 5: Inner Head Outline
Next, draw an inner line that perfectly duplicates the complex outer contour of the key head and neck curves. This creates the thick rim of the head.
Step 6: Create the Head Hole
Draw a single, perfect circle inside the upper head area, positioned centrally in the top lobe. This forms the key chain hole.
Step 7: Left Blade Groove
Draw two parallel vertical lines down the left side of the blade, extending into the key head, and connect them with a small arc at the top.
Step 8: Right Blade Groove
Similarly, draw another set of parallel vertical lines down the right side of the blade, next to the bittings, and connect them with an arc at the top.
Step 9: Coloring
For the final step, color the entire key shape a light yellow color. Then, color the two vertical grooves and the hole area with a contrasting brown color to complete the design.
Step 1: Draw the Outer Key Head
Start by drawing the ornate outer silhouette of the key bow. It features a wide, rounded clover or scalloped shape that tapers smoothly at the bottom toward where the shaft will connect.
Step 2: Add the Central Circle
Draw a perfect, medium-sized circle right in the center of the key bow. This forms the core of the decorative layout.
Step 3: Sketch the Left and Right Crescent Cuts
Add two symmetrical crescent-like or curved shapes inside the head, one on the far left side and one on the far right side, flanking the central circle.
Step 4: Form the Top and Bottom Curved Bands
Complete the inner patterns of the key head by adding two curved, arched segments—one directly above the central circle and one directly below it.
Step 5: Draw the Collar
At the base of the key head where the two outer lines nearly meet, draw a small, horizontal oval ring or collar.
Step 6: Extend the Long Shaft
From the bottom of the collar, draw two long, straight parallel vertical lines that curve into a smooth, rounded U-shape at the bottom to form the key’s shaft.
Step 7: Sketch the Ornate Key Bit
On the lower right side of the shaft, draw the complex, blocky key bit with square cutouts and notches.
Step 8: Complete with Color
For the final step, color the main body of the key (the head and the long shaft) with a vibrant yellow. Then, color the horizontal collar and the detailed key bit at the bottom with a contrasting orange.
Step 1: Start with the Bow Outline
Draw a horizontal, four-lobed flower-like shape to create the primary outline of the key’s bow. This shape determines the initial width of the final key.
Step 2: Establish the Inner Bow Outline
Draw a second, concentric set of lines inside the clover shape from Step 1. This new, smaller outline defines the inner edge and wall thickness of the decorative handle.
Step 3: Begin the Key Shaft and Collar
Extend a horizontal shaft from the right side of the clover bow. At the point of connection, add a distinct rounded collar, or shoulder, which transitions the handle into the main body of the key.
Step 4: Complete the Key Shank and Add the End Tip
Extend the horizontal shank to its full length. Then, draw a second rounded collar near the right end. This second collar caps the main shank, and a final, small rounded tip extends slightly beyond it, defining the end of the key’s shaft.
Step 5: Draft the Key Bit and Inner Cuts
Now, add the complex key bit to the underside of the shank, near the final collar. Draw this section with many right-angled stepped cutouts, and within the center of this main pattern, add a smaller, inverted T-shaped internal cross to create the complex bit structure.
Step 6: Define Lines and Color
Finally, finish the entire skeleton key drawing by solidifying all outlines. This final step is to fill the key with a vibrant, solid golden-yellow color, making the object look like a polished, antique brass artifact with black contours.
Step 1: Draw the Lower Left Corner Curve
Start the drawing by creating a small L-shaped curve in the lower-left corner of the canvas.
Step 2: Form the Angled Shank with Wavy Edge
Draw a long, straight diagonal line starting from the top of the curve. Create a wavy, uneven line from the other end of the curve that runs parallel to the straight line, forming the serrated edge of the key’s shank.
Step 3: Draw Short Connecting Lines and Curved Points
Add short perpendicular lines extending from the straight line, the end of the wavy line, and the angled end, creating points. These connect the shank to the parts that will form the key head.
Step 4: Outline the Main Round Head Curve
Draw a large, continuous curve from one connecting point on the shank, looping around to the opposite point, defining the main circular shape of the key’s head.
Step 5: Draw the Inverted Semicircle Curve
Inside the key head area, draw a new inverted semicircle that curves down from one connection point and then over to the other, creating a smooth inward boundary.
Step 6: Create the Circular Keyhole
Draw a small, complete circle inside the upper-right area of the key head, defining the hole for a keyring.
Step 7: Add Detail Grooves and Finish Outline
Draw a series of parallel lines along the length of the shank to create grooves and texture. Clean up the drawing and ensure all initial curved lines are finalized.
Step 8: Apply Gray Colors
Color the completed key. Use dark gray for the large key head section. The rest of the key, including the shank and handle base, should be filled with lighter gray. The inner grooves are filled with medium gray, and the small keyhole circle remains white.
Step 1: Draw the Key Bit
Begin by drawing the intricate “bit” (the teeth) of the key on the left side. This shape looks like a castle battlement or a square wave pattern with three downward notches and two upward extensions at the top.
Step 2: Form the Upper Base of the Bit
Extend a long horizontal line to the right from the rightmost top extension. On the left side, draw a curved, rounded cap that goes over the top left extension and extends slightly to the right, leaving a gap between the two horizontal lines.
Step 3: Add the Collar Ring
Connect the two horizontal lines on the right by drawing a vertical, rounded oval shape. This forms the collar or collar ring of the key.
Step 4: Extend the Key Shaft
Draw two parallel horizontal lines extending from the right side of the collar ring to the right. This creates the long shaft (or stem) of the key.
Step 5: Outline the Bow
Sketch the large decorative head of the key (the bow) at the right end of the shaft. The shape is reminiscent of a rounded clover or an ornate, puffy cloud contour.
Step 6: Create the Keyhole Loop
Draw a small, clean circle inside the rightmost tip of the bow. This represents the small hole where a keyring would attach.
Step 7: Detail the Inner Bow
Draw a larger, stylized hollow shape inside the main body of the bow, mirroring its outer curves. This gives the key head its classic, hollow vintage look.
Step 8: Apply Colors
Fill in the entire body of the key with a vibrant, solid yellow color. Finally, color the small collar ring in the middle with a contrasting orange hue to complete the illustration.
Step 1: Draw the Base Circular Shape
Start by drawing a large, incomplete circle that leaves an open gap on the upper right side. This open circular form will serve as the bow (the handle) of the key.
Step 2: Add the Keyring Hole
Draw a smaller, complete circle inside the lower-left area of the main circle. This forms the hole where a keyring passes through.
Step 3: Draw the Shoulder Anchors
Add two small, outward-pointing triangular or chevron-like shapes at the open ends of the large circle. These shapes will create the decorative shoulders where the handle transitions into the blade.
Step 4: Outline the Upper Edge of the Blade
Extend a long, straight line diagonally upward and to the right from the top shoulder anchor. At the far end, slightly curve or angle it downward to begin forming the tip of the key.
Step 5: Form the Jagged Teeth of the Key
Connect the far tip back to the lower shoulder anchor by drawing a series of jagged, zig-zag cuts. These pointed ridges create the unique teeth (the cuts) along the bottom edge of the key blade.
Step 6: Create the Center Blade Groove
Sketch a long, thin, pointed horizontal wedge shape running right through the middle of the blade. This decorative groove or ward run mimics the security slots found on modern keys.
Step 7: Apply Final Shading and Colors
Complete the illustration by filling the entire body of the key with a smooth, solid metallic gray color. Use a slightly darker gray shade to fill in the lower section of the center groove to give it a realistic, recessed 3D appearance.
Hopefully, this drawing tutorial on Key will help you easily create a nice drawing.
