You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a knife with simple steps.
Let’s get started!
Step 1: Outline the Handle
Draw a slanted, long rectangle to form the basic shape of the handle. On the top-left corner, add a small, rounded “hook” or protrusion which serves as a finger guard.
Step 2: Add the Rivet
Inside the top section of the handle, draw a small circle. This represents the rivet or pin that holds the knife’s handle scales together.
Step 3: Draw the Spine of the Blade
From the bottom-right corner of the handle, extend a long, slightly curved line downward. This line forms the “spine” (the top, unsharpened edge) of the blade leading to the tip.
Step 4: Sketch the Heel
Starting from the bottom-left corner of the handle, draw a short, curved line downward. This will become the “heel” of the blade, where the metal meets the handle.
Step 5: Define the Cutting Edge
Connect the end of the short curve from Step 4 to the tip of the long line from Step 3 using a wide, sweeping curve. This creates the “belly” and the sharp cutting edge of the knife.
Step 6: Add the Bevel Line
Draw a line parallel to the cutting edge, starting from the heel and ending at the tip. This line defines the bevel, indicating the sharpened part of the blade.
Step 7: Color Your Drawing
Bring the illustration to life with color. Use a reddish-brown for the handle to simulate wood or composite material, a light grey for the main blade, and a darker grey for the sharpened edge (the bevel).
Step 1: Outline the Handle
Draw two parallel, slightly curved lines to form the top and bottom edges of the knife handle.
Step 2: Close the Handle Butt
Connect the right ends of these lines with a smooth, rounded curve to create the butt (end) of the handle.
Step 3: Add the Rivets
Inside the handle shape, draw three small circles spaced evenly apart to represent the rivets that hold the handle scales in place.
Step 4: Sketch the Bolster
At the left end of the handle, draw a diagonal line and a short vertical line to define the bolster where the handle meets the blade.
Step 5: Draw the Spine of the Blade
From the top of the bolster, extend a long, straight line that curves slightly downward at the end to form the spine of the blade.
Step 6: Define the Cutting Edge
Draw a long, sweeping curve starting from the bottom of the bolster and meeting the spine at a sharp point to create the cutting edge.
Step 7: Add the Bevel Line
Inside the blade area, draw a line parallel to the cutting edge to indicate the bevel (the sharpened part of the blade).
Step 8: Apply Color
Complete your drawing by coloring the handle brown, the rivets light grey, and the blade using two different shades of grey to show depth.
Step 1: The Butt of the Handle
Start by drawing a short, slanted line on the left side of your paper. This will represent the very end (the butt) of the knife handle.
Step 2: The Top Edge
From the top of your slanted line, draw a long, slightly curved line extending to the right. This forms the spine or the top edge of the handle.
Step 3: The Bottom Grip
Starting from the bottom of your first slanted line, draw a wavy line that curves inward and then outward to create an ergonomic finger grip, ending with a small downward hook (the finger guard).
Step 4: Closing the Handle
Draw a vertical, slightly curved line to connect the top spine to the bottom finger guard. This completes the basic outline of the handle.
Step 5: Adding Rivets
Inside the handle shape, draw three small circles spaced evenly apart. These represent the rivets that hold the handle scales to the blade.
Step 6: The Blade Spine
From the top-right corner of the handle, extend a long, straight line to the right, tapering it slightly downward toward the end to form the top of the blade.
Step 7: The Cutting Edge
Draw a line starting from the bottom of the handle, extending to the right, and curving upward to meet the spine at a sharp point (the tip).
Step 8: The Bevel Line
Draw a thin line parallel to the bottom cutting edge. This detail represents the “grind” or the sharpened part of the blade.
Step 9: Coloring and Finishing
Finish the drawing by adding color. Use purple for the handle and grey for the metal blade to make the illustration pop.
Step 1: The Handle Butt
Begin by drawing a small, C-shaped curve at the bottom right of your paper to represent the base of the handle.
Step 2: The Handle Sides
From the ends of the curve, draw two parallel straight lines extending diagonally upward to form the length of the handle.
Step 3: The Crossguard
At the top of the handle, draw a thin, rectangular bar perpendicular to the handle lines to create the crossguard.
Step 4: The Spine and Serrations
Starting from the center of the crossguard, draw a line extending upward that features a zigzag pattern (serrations) near the base and turns into a straight line toward the tip.
Step 5: The Cutting Edge
Draw a smooth, curved line from the other side of the crossguard, extending it upward to meet the spine at a sharp, pointed tip.
Step 6: The Fuller (Blood Groove)
Inside the blade area, draw a long, narrow line that follows the curve of the blade to add realistic detail and depth.
Step 7: Final Coloring
Complete your drawing by coloring the handle olive green and the blade and crossguard in shades of grey to give it a metallic look.
Step 1:
Let’s start by drawing the guard of the knife. Draw a thin, diagonal rectangle in the center of your drawing space.
Step 2:
Next, draw the outline of the handle extending downwards from the rectangle you just drew. Notice the wavy, ergonomic shape on the left side for the grip.
Step 3:
Add texture to the handle grip. Inside the handle outline, draw several short, straight lines perpendicular to the edges to create ridges.
Step 4:
Near the rounded bottom end (the butt) of the handle, draw a small circle to represent a lanyard hole.
Step 5:
Now, begin drawing the blade. Starting from the top of the guard, draw a long, angled line extending upwards towards the left to form the spine of the blade.
Step 6:
Complete the shape of the blade. Draw a long, curved line from the sharp tip back down to the bottom of the guard, forming the cutting edge.
Step 7:
Add detail to the blade to show its structure. Draw a curved line inside the blade, running parallel to the cutting edge. This indicates the bevel or grind line.
Step 8:
Finally, color your drawing. Fill the handle with orange, the guard with a darker brownish-orange, and use two shades of gray for the blade (a lighter gray for the beveled edge and a darker gray for the main body of the blade).
Step 1:
Begin by drawing a straight, diagonal line downwards from left to right. This will form the spine (the back edge) of the knife blade.
Step 2:
From the top end of the line you just drew, draw a shorter straight line extending upwards at a right angle. This defines the front edge of the handle area.
Step 3:
Draw a long, sweeping curved line that connects the bottom tip of the spine line to the top end of the short vertical line. This creates the main shape of the blade and the bolster area.
Step 4:
Add detail to the blade by drawing another curved line just above and parallel to the bottom cutting edge. This indicates the sharpened bevel of the blade.
Step 5:
Draw the handle of the knife attached to the top section. Sketch a curved, ergonomic shape for the grip, ending with a rounded knob at the top.
Step 6:
Draw a straight line across the handle area near the blade. This separates the handle grip material from the metal bolster.
Step 7:
Add two small circles onto the handle grip area to represent the rivets holding the handle together.
Step 8:
Finally, color your drawing. Use a teal or turquoise color for the handle grip, light grey for the main body of the blade and bolster, and a darker grey for the beveled cutting edge and the rivets.
Hopefully, this drawing tutorial on Knife will help you easily create a nice drawing.
