You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a mailbox with simple steps.
Let’s get started!
Step 1: Draw the Front of the Mailbox
Start by drawing a dome shape for the front door of the mailbox. This is a tall rectangle with a rounded, curved top and a straight bottom line that slants slightly downward to the right.
Step 2: Add the Extension Lines for the Body
From the top center of the dome and from the bottom right corner, draw two long parallel lines extending upwards and to the right to create the length and 3D depth of the mailbox body.
Step 3: Complete the Main Body
Connect the ends of the two long lines by drawing a curved line at the top and a straight line down the right side, mirroring the shape of the front arch. This finishes the main 3D structure of the mailbox.
Step 4: Draw the Front Door Details
Inside the front dome shape, draw a slightly smaller matching arch line to create a border for the door. Then, add a small, vertical “C” shape on the right side of this inner door to serve as the handle.
Step 5: Add Trim Lines
Draw two curved vertical lines across the body of the mailbox to give it more structure—one near the front opening and another near the back end, following the curve of the top roof.
Step 6: Start the Mail Flag
On the right side of the mailbox body, draw a tall, inverted “L” shape made of two parallel lines to start creating the mail flag mechanism.
Step 7: Add the Flag Pivot
At the bottom base of the flag arm, draw a small circle with a slightly smaller circle inside it to represent the round joint or pivot where the flag attaches to the mailbox.
Step 8: Draw the Support Post
Beneath the mailbox, draw a tall, vertical rectangular pillar extending downwards. Add a third vertical line down the middle of this pillar to give the post a sturdy, three-dimensional look.
Step 9: Color Your Drawing
Finish your artwork by adding vibrant colors. Color the main body and front door of the mailbox in two different shades of light blue. Color the handle gray, and make the entire mail flag a bright, solid red. Finally, color the supporting post underneath a solid, earthy brown.
Step 1: Draw the Front Arch
Begin by sketching a dome shape for the front face of the mailbox. This shape consists of two straight vertical sides, a rounded arch at the top, and a flat bottom line that tilts slightly downward to the right.
Step 2: Add the Inner Door Frame
Inside the arch you just drew, sketch a slightly smaller matching dome line. This creates a neat border or frame for the mailbox door.
Step 3: Draw a Small Handle Knob
Near the upper center of the front door, draw a small circle with an even smaller curved extension on its right side to form a little pull knob.
Step 4: Add Perspective Lines
From the top center of the arch and from the bottom-right corner, draw two long, parallel straight lines extending far back and slightly upward to block out the depth of the body.
Step 5: Complete the Main Body
Connect the ends of those two parallel lines with a curved roof line and a straight vertical back line. This mirrors the front arch and completes the three-dimensional body of your mailbox.
Step 6: Create the Mail Flag
On the side of the mailbox, draw a vertical arm topped with a small triangular flag pointing to the right. At the bottom base of this arm, add a small circular joint where it connects to the body.
Step 7: Add the Supporting Post
Beneath the center base of the mailbox, draw a tall vertical post made of a rectangle. Add a straight line running down the middle of it to give it a sturdy, 3D block appearance.
Step 8: Sketch Grass Tufts
At the very bottom of the post, where it meets the ground, add a few sharp, zigzagging tufts of grass on both the left and right sides to root the image.
Step 9: Color Your Artwork
Bring your drawing to life with color! Fill the entire mailbox body and front door with a bright yellow. Color the handle knob a clean gray, and shade the mail flag and its circular joint in a bold red. Paint the wooden support post an earthy brown, and finish by coloring the grass patches at the base a vibrant green.
Step 1: Draw the front face and opening
Begin by drawing a basic arch shape, which will form the front face of the mailbox. Inside this arch, draw a smaller, matching shape to create the inner edge and the defined opening. A straight line across the bottom connects the inner and outer lines.
Step 2: Add the hinge and open door outline
Next, extend an angled frame downwards from the bottom edge of the arch. From this frame, draw a long, rounded U-shape that extends away from the front, outlining the door in its open position. This is like drawing a tongue sticking out.
Step 3: Sketch perspective lines for the body
Now, give the mailbox depth by adding lines to define its side. Draw one straight line extending horizontally back from the top of the main arch and another similar line from the bottom-left corner where the door frame is. This begins to define the volume.
Step 4: Draw the curved back and top of the body
Connect the two perspective lines by drawing a large, continuous curve. This line should match the curve of the original front arch, creating the far-side silhouette of the mailbox.
Step 5: Define the internal floor
To show that the mailbox is hollow, draw a straight horizontal line across the opening of the box, positioning it parallel to the door hinge. This creates the floor surface.
Step 6: Add the flag hinge detail
On the side of the mailbox body, draw two concentric, smaller circle shapes, with a slight offset to create a three-dimensional effect. This is the mounting bracket for the mail flag.
Step 7: Attach the flag and its pole
From the center of the mounting circle, draw a small pole extending straight up. At the top of this pole, draw a rectangular, standard flag shape, positioning it to stand upright, indicating “mail to collect.”
Step 8: Draw the supporting post
Below the main body of the mailbox, draw two vertical parallel lines to form the sides of the post. Add a small angled line at the bottom to close it off, giving it a flat, rectangular appearance.
Step 9: Complete and color the drawing
Now that the structure is complete, color the final mailbox. The main body, including the side and top curve, is colored a vibrant green, with the interior of the box a slightly darker green. The open door is a matching light green. The entire flag (pole, hinge, and flag itself) is bright red. The vertical support post is colored a natural-looking orange-brown wood color. All lines are dark and clear.
Step 1: Draw the front profile
Start by sketching a tall arch shape for the front of the mailbox. It looks like an upside-down “U” with long, straight vertical sides.
Step 2: Create the perspective lines
From the top curve and the middle section of the right vertical line, extend two parallel straight lines diagonally upward and to the right to establish the 3D depth.
Step 3: Outline the back and side
Connect the ends of those two diagonal lines with a curved line matching the front arch shape, and add a horizontal line across the middle section to separate the top part from the bottom body.
Step 4: Add the legs
Draw four small, rectangular leg extensions coming down from the bottom corners of the main body, creating a sturdy base for the mailbox to stand on.
Step 5: Give the legs depth
Add small internal vertical lines behind the legs to give them a three-dimensional thickness.
Step 6: Create the mail slot opening
Inside the upper curved section of the front face, draw a wide, rounded trapezoid shape to outline the opening where letters are dropped in.
Step 7: Add depth to the mail slot
Draw a horizontal line and a diagonal line inside the trapezoid slot to create an angled, recessed chute effect.
Step 8: Detail the handle
On the lower front section, draw a thick, curved handle shape that looks like an inverted “C” facing to the left.
Step 9: Outline the collection door
Sketch a large rectangular shape with rounded corners on the lower front panel, enclosing the handle you just drew. This defines the retrieval door.
Step 10: Complete and color the drawing
Finish the artwork by filling it with vibrant colors. The main body, legs, and top of the mailbox are painted a bright blue. The collection door on the front is a slightly darker shade of blue-gray. The interior chute of the mail slot and the front handle are both colored a solid, neutral gray. All outer edges remain defined by clean black outlines.
Step 1: Draw the Front Arch
Start by drawing the front face of the mailbox. Sketch an arch shape that looks like an upside-down “U” and close the bottom with a straight line that tilts slightly upward to the right.
Step 2: Add the Length Lines
From the front face, extend two parallel straight lines back and to the right to create the body of the mailbox. One line starts from the top center of the arch, and the other starts from the bottom right corner.
Step 3: Close the Body Shape
Connect the ends of the two lines you just drew by mimicking the curve of the front arch. Draw a curved line down to the right, ending with a short vertical line to finish the back section of the mailbox.
Step 4: Add the Internal Opening Line
Draw a straight line across the front face, connecting the bottom left corner to the middle right edge. This line forms the floor of the open mailbox.
Step 5: Draw the Flag Base
Add a small, simple circle on the upper side of the mailbox body. This will serve as the base attachment for the mail flag.
Step 6: Sketch the Mail Flag
From the small circle, extend a thin, vertical rectangle upward. At the top of this stand, add a horizontal rectangular flag pointing to the right.
Step 7: Draw the Open Door
Sketch the mailbox door hanging down. Start from the bottom edge of the front opening and draw a large, smooth loop that curves downward and back up, showing that the door is flipped open.
Step 8: Add the Door Handle
Inside the curved door you just drew, add a small, thin horizontal rectangle near the bottom to represent the handle or latch of the door.
Step 9: Draw the Support Post
Add a sturdy vertical post underneath the mailbox. Draw a long vertical rectangle extending downwards from the bottom edge, and add a thin side panel to give the post a three-dimensional look.
Step 10: Color Your Drawing
Now, it is time to bring the mailbox to life with color. Paint the entire outer body and the open door in a warm, vibrant orange-yellow hue. Make the inside cavity a slightly darker shade of golden brown to create depth. Color the mail flag a bright, bold red with a gray base circle. Finally, color the support post a solid, earthy brown, using a slightly darker brown on the side panel for a realistic shadow effect.
Step 1: Draw the Front of the Mailbox Hood
Start by drawing the front face of the mailbox’s curved top. Sketch a vertical arch shape that closes at the bottom with a slightly slanted straight line.
Step 2: Add the Depth of the Hood
From the top peak and the bottom-right corner of your arch, draw two parallel, straight lines extending up and to the right to create a 3D perspective.
Step 3: Complete the Mailbox Hood
Connect the far ends of the two lines you just drew with a matching curved arch, completing the solid, rounded top section of the mailbox.
Step 4: Draw the Legs
Extend three long, straight vertical lines downward from the bottom corners of the hood—one from the front-left, one from the front-center, and one from the back-right—to start building the body and legs.
Step 5: Outline the Base of the Body
Connect the vertical lines at the bottom using short horizontal and vertical cuts to form a distinct, four-legged stand for the collection box.
Step 6: Add Inner Dimension to the Legs
Draw small vertical lines on the inside edges of the feet to give the legs a solid, three-dimensional look.
Step 7: Create the Mail Slot Opening
On the curved front-slanted face of the hood, draw a large, centered rectangle that follows the angle of the top section. This will be the opening where letters are dropped.
Step 8: Give the Mail Slot Depth
Draw an inner horizontal line and a slanted connecting line on the right side inside the rectangle to give the drop slot realistic depth.
Step 9: Add the Handle
Draw a small, curved handle grip right in the middle of the slanted drop-down flap inside the mail slot.
Step 10: Add the Front Service Door
On the flat front body of the mailbox, draw a large rectangle with rounded corners. This represents the door used to collect the mail.
Step 11: Color the Mailbox
Bring the mailbox to life with bright, solid colors! Color the entire curved top section and the inside of the mail slot a bold, vibrant red. Then, color the entire bottom base, the legs, and the front collection door in a matching bright blue.
Hopefully, this drawing tutorial on Mailbox will help you easily create a nice drawing.
