You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a microphone with simple steps.
Let’s get started!
Step 1: The Ring
Start by drawing a slanted, rounded rectangle. This will serve as the decorative ring or band that sits in the middle of the microphone’s head.
Step 2: The Head
Draw a large circle behind the ring. The ring should look like it is wrapping around the center of this circle, dividing it into two halves.
Step 3: The Handle
Extend two long, parallel lines downward from the bottom of the circle to create the main body or handle. Close the bottom of the handle with a soft, rounded curve.
Step 4: The Switch and Collar
Draw a small oval-shaped button (the power switch) in the upper middle of the handle. Add a slightly curved line near the top of the handle to create a collar where it meets the microphone head.
Step 5: The Base
At the very bottom of the handle, add a small, rounded trapezoid shape. This is the connector piece where the cable will attach.
Step 6: The Cable
Draw a thick, curvy “S” shaped line coming out from the bottom of the connector. This represents the microphone cord.
Step 7: Coloring
Finally, add color to your drawing:
– Blue/Grey: For the head and the main handle.
– Yellow/Gold: For the ring around the head.
– Orange: For the power switch.
– Light Grey: For the collar and the base connector.
– Black: For the cable and the outlines.
Step 1: The Basic Head Shape
Begin by drawing a large circular shape that is slightly flattened at the bottom. This forms the main structure of the microphone’s mesh head.
Step 2: Adding the Middle Band
Draw two parallel curved lines horizontally across the center of the head. This creates a decorative band that wraps around the microphone grill.
Step 3: Drawing the Mesh Pattern
Inside the head, draw a series of criss-crossing diagonal lines. This grid pattern represents the protective wire mesh.
Step 4: The Tapered Handle
Draw two long lines extending downwards from the base of the head, narrowing slightly toward the bottom. Connect them with a slightly curved line at the base to finish the handle.
Step 5: The Top Collar
Just below where the head meets the handle, add a small curved horizontal line to create a collar or ring at the top of the body.
Step 6: The Power Switch
In the middle of the handle, draw a rounded rectangular button with a small circle inside it to represent the “on/off” switch.
Step 7: The Bottom Connector
At the very bottom of the handle, add a stepped rectangular shape. This is the output port where the cable connects to the microphone.
Step 8: The Cursive Cable
Draw a thin, loopy line extending from the bottom of the connector. This represents a tangled or coiled microphone cord.
Step 9: Final Coloring
Finish your artwork by adding vibrant colors:
– Yellow: For the mesh head and the center of the switch.
– Pink: For the main body of the handle.
– Purple: For the decorative bands, the switch plate, and the bottom connector.
Step 1: The Base of the Head
Start by drawing a diagonal, rounded rectangle (like a pill shape). This will serve as the collar that connects the microphone head to the handle.
Step 2: The Microphone Grill
Draw a large circle sitting on top of the collar you created in Step 1. This represents the main body of the microphone’s head.
Step 3: The Center Band
Add a thin, rounded horizontal band across the middle of the circle. This adds detail to the metal mesh grill.
Step 4: The Mesh Pattern
Inside the circle, draw a series of criss-cross diagonal lines. This creates the “wire mesh” texture characteristic of a dynamic microphone.
Step 5: The Handle
Draw a long, tapering rectangle extending downwards from the collar. Make sure the bottom of the handle is slightly narrower than the top.
Step 6: The Switch and Detail Line
Add a horizontal line near the top of the handle. Below that, draw a small rounded rectangle with a line through the middle to represent the On/Off slide switch.
Step 7: The Connector
At the very bottom of the handle, draw a small trapezoid shape with rounded corners. This is the port where the cable plugs in.
Step 8: The Cable
Draw a thick, “S” shaped curved line coming out of the bottom connector. This represents the microphone cord.
Step 9: Coloring
Finally, add color to your drawing! You can use orange for the handle, blue for the accent rings, yellow for the connector, and grey for the grill and cable.
Step 1: The Handle
Start by drawing a long, diagonal rectangle with a rounded bottom and a flat top to form the main handle of the microphone.
Step 2: The Microphone Head
Draw a large circle sitting directly on the flat top of the handle to create the basic shape of the microphone’s head.
Step 3: Defining the Grill
Draw a straight diagonal line across the circle, parallel to the top of the handle, to separate the mesh grill from the lower part of the head.
Step 4: Adding the Mesh Pattern
Inside the upper section of the circle, draw a series of intersecting diagonal lines to create a diamond-shaped mesh pattern.
Step 5: The Power Switch
In the upper half of the handle, draw a small, centered rectangle to represent the On/Off switch.
Step 6: The Cable
At the rounded bottom of the handle, draw a thick, “S” shaped curved line to represent the microphone’s cord.
Step 7: Coloring
Finish your drawing by adding color: use light blue for the handle and mesh grill, grey for the lower head and cable, and a darker grey for the switch.
Step 1: Draw the Neck
Start by drawing a small, horizontal rectangle. This serves as the connecting piece between the microphone head and the handle.
Step 2: Draw the Handle
From the bottom corners of the rectangle, draw two long lines that tilt slightly inward toward the bottom. Connect them at the base with a curved line to complete the main body of the handle.
Step 3: Add the Power Switch
In the center of the handle, draw an oval shape containing a smaller oval inside it. This represents the power button or sliding switch.
Step 4: Draw the Microphone Head (Grille)
On top of the initial rectangle, draw a large circle. Note that the bottom of the circle should slightly overlap or sit directly on the rectangle “neck” created in Step 1.
Step 5: Add the Middle Band
Draw a thin, horizontal rectangular band across the widest part of the circular head. This adds detail to the grille of the microphone.
Step 6: Color Your Drawing
Finally, bring your drawing to life with color! You can use vibrant blue for the head, bright green for the handle, and grey for the metallic bands and the switch.
Step 1: Draw the Handle
Start by drawing a long, slightly tapered rectangle at a diagonal angle. Use curved lines for the top and bottom edges to give the handle a rounded, 3D appearance.
Step 2: Add the Cable Connector and Wire
At the bottom of the handle, draw a small, rounded “U” shape to represent the cable connector. From the center of this connector, draw a long, wavy line extending downward for the microphone cable.
Step 3: Add the Upper Decorative Band
Near the top of the handle, draw a single curved line across the width. This creates a decorative band or a separation point for the microphone’s head.
Step 4: Start the Lower Grille
Draw two curved lines extending outward and upward from the top corners of the handle. These lines will form the bottom base of the microphone’s circular head.
Step 5: Add the Grille Rim
Connect the two lines from the previous step by drawing a thick, rounded horizontal band. This represents the metal rim that secures the mesh grille.
Step 6: Complete the Grille
Draw a large, smooth dome or semi-circle on top of the horizontal rim to finish the microphone head.
Step 7: Color the Drawing
Finish your artwork by adding color. Use a vibrant pink for the main body and grille, and a neutral grey for the decorative bands, rim, and cable connector.
Hopefully, this drawing tutorial on Microphone will help you easily create a nice drawing.
