You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw an orchid with simple steps.
Let’s get started!
Step 1: Drawing the Central Labellum (Lip)
Begin by drawing the central, complex part of the orchid flower, known as the labellum or lip. This structure has a specific, irregular shape with curved lobes on the sides and a central point at the bottom, resembling a small, stylized insect or mask.
Step 2: Adding the Column and Lateral Sepals
Draw a small, rounded shape at the very top center of the labellum; this is the column. Then, add two small, curved petal-like structures branching out from the sides of the column, positioned just above the main body of the labellum.
Step 3: Drawing the Two Large Upper Petals
Expand the flower structure by adding the two main, large petals. These are broad, rounded, and curve outwards significantly, positioned on either side and slightly above the central labellum. Their bases connect near the column.
Step 4: Adding the Two Lower Sepals
Complete the main outline of the flower by drawing the two lower sepals. These are generally narrower than the upper petals and are positioned below the large petals, extending outwards from the base of the labellum to frame the lower part of the flower.
Step 5: Drawing the Stem
From the center of the flower’s base (underneath the labellum), draw a long, slightly curved, vertical line extending downwards. Add a parallel line next to it to give the stem thickness, creating a simple, slender stalk.
Step 6: Adding the Two Leaves
At the lower part of the stem, near the bottom, draw two large, oval-shaped leaves. One leaf should extend to the left, and the other to the right, branching off from the main stem.
Step 7: Coloring the Orchid
Fill in the line art to complete the illustration. Color the three large petals (the top one and the two side ones) a vibrant magenta or purple. Color the main, central labellum a darker, deep purple shade. The small, circular center of the column should be filled with a bright orange or yellow. Finally, color the stem and the two large leaves a solid green. The outlines should remain black.
Step 1: Drawing the Basic Labellum
Begin by drawing the central part of the flower, known as the labellum or lip. Create a shape with two upward-curving hooks at the top, resembling stylized horns or antennae. Below these, draw a rounded, shield-like shape with a small vertical line inside it. This forms the complex center structure of the orchid.
Step 2: Adding the Column
Extend a small, rounded oval shape upwards from the center of the labellum, nestled between the two upper hooks. This new element represents the column of the orchid flower.
Step 3: Sketching the Petals
Expand the flower structure by adding the main petals. Draw two large, rounded, somewhat ear-shaped petals extending outwards from the central column, symmetrically on the left and right. Add a few short, radiating lines near the base of each new petal for detail.
Step 4: Adding the Sepals
Complete the main flower head by adding the sepals. Draw one pointed, oval sepal extending upwards from behind the central column. Then, draw two similar, slightly smaller sepals pointing downwards, one behind each of the large side petals.
Step 5: Drawing the Stem
Create the main stalk of the plant. Draw two parallel, slightly curving vertical lines extending downwards from the bottom of the central labellum.
Step 6: Adding Stem Offshoots
Add small branches to the main stem. Draw two small, V-shaped lines branching off the main stem, positioned below the flower head.
Step 7: Drawing Flower Buds
At the end of each small stem offshoot, draw a small, rounded, almond-shaped outline. These will be the developing flower buds.
Step 8: Adding the First Pair of Leaves
At the base of the main stem, draw two large, oval-shaped leaves extending outwards in opposite directions. Add a curved line down the center of each leaf to define their structure.
Step 9: Drawing the Basal Leaves
Add more foliage at the base. Draw another pair of large, oval leaves, similar in shape to the first pair but positioned slightly lower and overlapping them, forming a fuller plant base.
Step 10: Adding Color and Finalizing
To finish the drawing, apply color to the orchid. Fill the large petals and the upper sepal with a vibrant purple hue. Color the central labellum a contrasting bright reddish-pink, and add a touch of yellow to the very center of the column. Finally, color all the leaves and the main stem a lush green. The result is a fully illustrated purple orchid.
Step 1: Draw the Center of the Flower
Begin by drawing the intricate central part of the orchid bloom. This structure includes the small, rounded top petal, the ruffled column in the middle, and the two adjacent side petals, forming the complex heart of the flower.
Step 2: Add the Two Main Upper Petals
Extend the drawing by adding the two large, broad petals. Draw one large, rounded shape on the upper left and another matching shape on the upper right, attaching them symmetrically to the center structure created in the previous step.
Step 3: Complete the Flower Petals
Finish the outline of the main flower by adding the final two petals on the bottom. Draw a curved petal shape extending downwards and outwards from the lower-left side of the center, and a mirror image of this shape on the lower-right side, completing the five-petal structure.
Step 4: Draw the Stem
Attach the flower head to a base by drawing the stem. Create two parallel, slightly wavy lines extending vertically downwards from the center bottom of the orchid bloom, forming a slender stalk.
Step 5: Add the Leaves
Add foliage to the base of the stem. Draw two large, elongated, oval-shaped leaves, one curving outwards to the left and the other to the right, originating from the bottom of the stem.
Step 6: Add Leaf Veins
Detail the leaves by adding a central vein to each. Draw a single line running down the middle of both the left and right leaves, following their curvature.
Step 7: Draw the Pot Rim
Establish the top of the planter. Draw a flattened oval shape horizontally across the base of the leaves and stem, representing the rim of the pot.
Step 8: Complete the Pot
Finish the structure of the planter. Draw two curved lines extending downwards from the ends of the oval rim, connecting at the bottom to form a simple, rounded pot shape.
Step 9: Color the Orchid
Apply color to the complete line drawing to finish the illustration. Fill the five main petals with a vibrant purple hue. Color the small center structure and the ruffled column in the middle a bright red-pink, with a tiny yellow accent at the very top. The stem and the two large leaves should be colored a lush green. Finally, fill the pot with a warm, earthy brown shade. The entire drawing retains its original clean black outline.
Step 1: Positioning the Centers
To begin, place two small circles on the canvas to serve as the foundational centers for the two orchid flowers. Position one circle slightly lower and to the left, and the second circle higher and to the right, establishing the overall balance of the drawing.
Step 2: Drawing the Inner Flower Structures
Draw the complex inner parts of the flowers, known as the column and labellum, around the two centers established in the previous step. These structures should be somewhat symmetrical and heart-like in shape, attached directly below the initial circles.
Step 3: Adding the Upper Sepals
Now, attach the main upper petal, or dorsal sepal, to the top of each inner structure. These should be broad, rounded, and roughly circular shapes that arch over the central columns.
Step 4: Adding the Side Petals
Expand the flowers by adding the two lateral petals. These are attached to the sides of the central column, below the dorsal sepal. They should be rounded and symmetrical, creating the primary “face” of the orchid blooms.
Step 5: Adding the Lower Sepals
Complete the main structure of the flowers by adding the two lower sepals. These are attached at the base of the labellum and fan out slightly downwards and outwards, providing a base for the flower head.
Step 6: Drawing the Stem and Branch
Next, draw a main stem extending downwards from the center of the lower orchid flower. Add a small Y-shaped branch connecting the upper flower to this main stem, linking the two blooms together.
Step 7: Drawing the Leaves
At the very bottom of the main stem, draw a cluster of thick, broad, elliptical leaves. These leaves should overlap slightly at the base, fanning outwards from the point where the stem ends.
Step 8: Applying Color
Finally, apply color to bring the drawing to life. The large petals (sepals and lateral petals) are colored bright pink. The intricate central labellum is filled with a deep, dark red. The small, central column features a touch of bright yellow. The entire stem and all the base leaves are colored vibrant green. All outlines remain a crisp black.
Step 1: Outline the Base of the Pot
Begin by drawing the bottom outline of a plant pot. This consists of a short horizontal line connected to two upward-curving lines on either side, creating the lower structure of the container.
Step 2: Complete the Pot Rim
Add the rim of the pot. Draw a wide, flattened oval shape directly on top of the base established in the previous step, completing the outline of the pot.
Step 3: Draw the Stems
Extend two parallel, slightly wavy lines vertically upward from the center of the pot’s rim. These lines form the main stems that will support the leaves and flowers.
Step 4: Add the Leaves
Attach two large, rounded leaves to the base of the stems, just above the pot rim. Each leaf should have a central vein line drawn down its middle for detail.
Step 5: Form the Central Flower Structure
Create the intricate central part of the orchid blossom (the column and labellum) at the top of the stems. Draw a small, central circle surrounded by a complex, lobed shape resembling a stylized heart or butterfly.
Step 6: Add the Upper Sepals
Draw the two large, rounded upper sepals. These should curve outward and upward from the central structure, forming the top lobes of the flower.
Step 7: Outline the Lower Petals
Complete the main flower outline by adding the two lower petals. Draw a larger, rounded petal extending downward and slightly to each side from the central structure, positioned beneath the upper sepals.
Step 8: Add Vein Details
Enhance the orchid petals by drawing delicate, branching veins radiating outward from the central column towards the edges of all five flower segments (sepals and petals).
Step 9: Color the Orchid
Fill the drawing with color to complete the image. The pot is colored brown, the leaves and stems are green, the main petals are light pink, the central labellum is dark purple, and the center of the labellum is yellow. The outlines remain dark and defined.
Hopefully, this drawing tutorial on Orchid will help you easily create a nice drawing.
