You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Hello.
Today, drawing123.com will guide you how to easily draw a pirate ship with simple steps.
Let’s get started!
Step 1: Draw the Water
Start by drawing a set of two wavy, horizontal lines near the bottom of your page. These will represent the ocean waves.
Step 2: Draw the Ship’s Hull Outline
Draw the basic outline of the ship’s hull. It should be a rounded, bowl-like shape sitting on the water lines you drew in Step 1. The front (bow) should curve up slightly, and the back (stern) should have a slightly higher, squared-off shape.
Step 3: Add Details to the Hull
Draw two horizontal lines around the middle of the hull. These lines represent the deck railing and the ship’s planking detail.
Step 4: Add Portholes
Draw three small circles in a row between the two horizontal lines you added in the previous step. These will serve as the ship’s portholes or cannon openings.
Step 5: Draw the Sails
Draw the two sails. The main sail should be large and full, and a smaller sail should be drawn above it. They should be roughly rectangular but with slightly curved or rounded sides to suggest wind in the sails.
Step 6: Add the Mast
Draw a vertical line that runs from the top of the hull, straight up through the center of both sails. This is the ship’s mast
Step 7: Draw the Flag
At the very top of the mast, draw a small, forked pennant or flag blowing off to one side.
Step 8: Draw the Jolly Roger
Draw a classic skull and crossbones symbol (the Jolly Roger) onto the large, main sail.
Step 9: Color the Pirate Ship
Finally, color in your drawing! Use a brown or orange-brown color for the wooden hull and railing, and fill the sails with a black color. Color the Jolly Roger white (or red, as indicated in the prior step’s outline) and the top flag red. You can also color the water blue if you wish.
Step 1: Draw the Water
Begin by drawing two sets of wavy lines at the bottom of your drawing area. One set of waves should be continuous, while the other set has a small gap in the middle. These lines represent the water.
Step 2: Draw the Ship’s Hull Outline
Above the waves, draw the main outline of the ship’s hull. This shape should be rounded at the bottom, extending upwards, with a slightly pointed bow (front) and a more vertical, squared-off stern (back). The hull should sit partially submerged in the waves.
Step 3: Add the Bow Detail
Draw a short, curved horizontal line near the front (bow) of the ship, just below the top edge of the hull. This adds a bit of detail to the ship’s structure.
Step 4: Add Portholes
Draw three small circles evenly spaced along the side of the ship’s hull. These represent the portholes or cannon openings.
Step 5: Draw the Sails
Draw two sails on the ship. The main sail should be larger, and a smaller, upper sail should be drawn above it. Both sails should have a slightly curved shape to suggest they are catching the wind.
Step 6: Add the Mast
Draw a vertical line extending upwards from the center of the ship’s hull, passing through both sails. This is the mast. Add a small horizontal line to indicate where the upper sail attaches.
Step 7: Draw the Jolly Roger
Draw a skull and crossbones symbol (the Jolly Roger) in the center of the large, main sail.
Step 8: Add the Top Flag
Draw a small, forked flag or pennant at the very top of the mast, above the upper sail. It should appear to be blowing in the wind.
Step 9: Draw the Cabin
On the stern (back) of the ship, draw a small, rectangular cabin structure. It should have a curved arch representing a doorway or window, and a flat roof.
Step 10: Add the Cabin Flag
On top of the cabin structure, draw a short pole with another small, forked flag or pennant attached. This flag should also appear to be blowing in the wind, similar to the one on the main mast.
Step 11: Color the Pirate Ship
Finally, color in your drawing! Use a brown or orange-brown color for the wooden hull, the cabin, and railing, and fill the sails with a black color. Color the Jolly Roger white (or red, as indicated in the prior step’s outline) and the flags red.
Step 1: Draw the Deck and Railing Outline
Start by drawing the top outline of the ship’s railing and deck. This is a complex horizontal shape that defines the bow (front pointed section), the raised stern (back section), and the lower main deck area.
Step 2: Complete the Hull Contour
Draw the curved bottom and side lines to complete the overall shape of the hull. This line connects the front and back of the railing outline, forming the ship’s body beneath the deck.
Step 3: Add Portholes
Draw four equally spaced circles in the lower section of the hull. These will serve as the ship’s portholes or cannon ports.
Step 4: Add Hull Planking Details
Draw multiple horizontal lines across the entire hull to represent the wooden planks and striping of the ship’s exterior.
Step 5: Draw the Mast and Yardarms
Draw the main mast as a tall, vertical line rising from the center deck. Add two horizontal lines (yardarms) across the mast to hold the sails.
Step 6: Draw the Sails
Draw two sails. Each should be a large, curved shape attached to the mast and the respective yardarm, giving them a full, wind-blown appearance.
Step 7: Draw the Jolly Roger
Draw the skull and crossbones symbol (the Jolly Roger) onto the upper sail.
Step 8: Add the Top Flag
Draw a small, forked pennant or flag at the very top of the mast.
Step 9: Color the Pirate Ship
Color the drawing. Fill the sails with black, the top flag with red, and the hull and railing with shades of brown and yellow-orange to represent wood. You can also color the portholes and the Jolly Roger skull a lighter color, like white or light blue.
Step 1: Draw the Basic Hull Shape
Begin by drawing the outer contour of the ship’s hull. This shape is rounded at the bottom, has a pointed bow (front), a tall, flat stern (back), and a wide, U-shaped cutout for the mid-deck.
Step 2: Draw the Inner Railing
Draw a line that follows the top edge of the hull you just created. This inner line defines the thickness of the railing and deck area.
Step 3: Add Lower Portholes
Draw five small circles in a row along the lower, curved part of the hull. These are the main portholes or cannon openings.
Step 4: Draw the Quarterdeck Cabin
Draw a rectangular structure on the raised stern (back) section of the ship. This represents a quarterdeck cabin or raised sterncastle.
Step 5: Add Cabin Portholes
Draw three small circles on the side of the rectangular cabin structure you added in the previous step.
Step 6: Draw the Main Sails
Draw two large, curved sails rising from the main deck cutout area. One sail should be larger (the main sail) with a smaller sail above it.
Step 7: Add the Main Mast and Flag
Draw the main mast as a vertical line running through the center of the two sails. Add a flagpole and a small, forked flag at the top of this mast.
Step 8: Draw the Jolly Roger
Draw a skull outline on the main sail.
Step 9: Draw the Second Set of Sails
Draw a second set of two sails rising from the quarterdeck cabin area. These sails should be slightly smaller than the main sails.
Step 10: Add the Second Mast
Draw the second mast as a vertical line running through the center of the two new sails on the quarterdeck.
Step 11: Color the Pirate Ship
Color the drawing. Fill the sails with black, the top flag with red, and the hull and railing with shades of brown and yellow-orange to represent wood. You can also color the portholes and the Jolly Roger skull a lighter color, like white or light blue.
Step 1: Draw the Water
Start by drawing two parallel, wavy horizontal lines near the bottom of your page to represent the ocean waves.
Step 2: Draw the Keel and Bow Structure
Draw the keel line and the curved bow (front) structure of the ship, making sure it extends down into the water.
Step 3: Draw the Deck and Hull Top
Draw the top line of the hull and the deck railing. This is a long, mostly straight line that dips in the middle for the main deck and rises at the stern (back) to form the quarterdeck.
Step 4: Define the Stern
Add a short horizontal line on the top of the raised stern section to define the upper deck railing.
Step 5: Complete the Hull Outline
Draw a horizontal line running along the middle of the hull. This separates the top deck section from the lower part of the hull.
Step 6: Complete the Lower Hull
Draw the curved, vertical line at the stern to connect the back of the hull to the water, completing the main body of the ship.
Step 7: Add Portholes
Draw three circles horizontally across the center line of the hull. These are the main portholes or cannon ports.
Step 8: Add Planking Details
Draw multiple horizontal lines across the hull, both above and below the portholes, to represent the wooden planking.
Step 9: Add Stern Windows
Draw three small, rectangular or arched windows/openings on the side of the raised stern section.
Step 10: Draw the Sails
Draw two main masts (vertical lines) rising from the deck areas. Then, draw the four sails—two on each mast—using curved, rectangular shapes to make them look full of wind.
Step 11: Draw the Jolly Roger
Draw the classic skull and crossbones symbol (the Jolly Roger) onto the upper sail.
Step 12: Add Masts and Flag
Draw the two vertical masts passing through the sails and connecting to the deck. Add yardarms to support the sails and draw a flagpole with a red flag at the top of the taller mast.
Step 13: Color the Ship
Color the ship. Use shades of brown for the wooden hull and masts, black for the sails, white for the skull and crossbones, and red for the top flag.
Step 1: Draw the Upper Hull Outline
Start by drawing the outline of the upper part of the ship’s hull and deck. This shape is long and low, with a raised section at the back (the sterncastle) and a lower angled section at the front (the bow).
Step 2: Draw the Bottom of the Hull
Add the bottom curve of the ship’s hull. This should be a smooth, rounded line connecting the front and back of the upper hull to form the boat’s body.
Step 3: Add the Sterncastle Window
Draw a small, rounded, D-shaped window on the raised sterncastle section at the back of the ship.
Step 4: Add the Portholes
Draw three small circles on the side of the hull below the deck line. These will be the portholes (or cannon ports) of the ship.
Step 5: Draw the Hull Planks
Add two curved horizontal lines across the bottom section of the hull. These lines help give the impression of wooden planking on the ship’s side.
Step 6: Draw the Stern Anchor/Rudder Post
Draw a small, angled, triangular shape extending from the back of the ship’s deck. This represents a rudder post or a decorative stern piece.
Step 7: Draw the Main Sails
Draw the two largest sails. These are large, slightly curved rectangles placed high above the hull. The lower sail is the biggest, and the one above it is slightly smaller.
Step 8: Add the Smallest Sail
Draw a smaller, third sail to the right, behind the two main sails. Like the others, it has a curved side to suggest it is billowing in the wind.
Step 9: Add the Masts
Draw the masts supporting the sails. These are vertical lines extending from the deck up through the sails. The mast supporting the front sails should be centered on the ship, and the mast for the smaller back sail is on the sterncastle.
Step 10: Add the Flags
Add small, triangular flags at the very top of both masts. This completes your cartoon pirate ship!
Step 11: Add the Jolly Roger
On the largest sail, draw the classic skull and crossbones symbol, also known as the Jolly Roger. Start with an outline of a skull, then add two crossed bone shapes below it.
Step 12: Color the Ship
Now it’s time to bring your pirate ship to life with color! Color the hull of the ship brown, the deck and sterncastle a golden yellow, the sails black, the skull and crossbones white, the flags red, the masts brown, and the window on the sterncastle light blue.
Hopefully, this drawing tutorial on Pirate Ship will help you easily create a cool drawing.
