You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a platypus with simple steps.
Let’s get started!
Step 1: Draw the Bill
Start by sketching the platypus’s distinct bill. It should look like a wide, smooth duck bill with a gentle smile line on the right side. Add two tiny curved lines near the front for the nostrils, and a small curve on the top bridge of the bill to give it shape.
Step 2: Add the Eyes and Eyebrows
Directly above the bill, draw two large, expressive oval eyes looking slightly upward and to the left. Inside each eye, add a smaller circle for the pupil and a tiny dot for the highlight. Sketch a small, curved eyebrow high above each eye.
Step 3: Shape the Head
Enclose the face by drawing a large, smooth, rounded shape for the head. The line should curve gently around the eyes and connect underneath the bill to form a chubby cheek on the right.
Step 4: Add the First Arm
On the right side, just below the head, draw a smooth, downward-sloping arm. Finish the bottom of the arm with three rounded fingers or claws.
Step 5: Draw the Body and Tummy
From the bottom left of the bill, draw a long, smooth curve downward to create the left side of the body. Continue the curve around the bottom to form a pear-shaped torso that connects back up to the right arm. Inside this body shape, draw a large oval to mark the platypus’s tummy.
Step 6: Add the Second Arm
On the left side of the body, mirror the first arm by adding a second downward-sloping arm, also finishing with three small, rounded fingers.
Step 7: Draw the Webbed Feet
At the very bottom of the body, sketch two wide, webbed feet flaring outward. Each foot should have three distinct, wavy ridges to show the webbing.
Step 8: Add the Beaver-Like Tail
Extend a large, flat, paddle-shaped tail out from the lower right side of the body, completing the classic platypus silhouette.
Step 9: Color Your Drawing
Bring your character to life with color. Fill the main body and head with a warm, medium brown. Use a lighter, cream-beige color for the large oval tummy patch. Color the bill, both webbed feet, and the flat tail in a matching dark gray or charcoal shade. Finally, fill the eyes with solid black, leaving the tiny highlight dots crisp white.
Step 1: Draw the Base of the Bill
Start by sketching a wide, bumpy horizontal oval shape that tappers slightly on the sides and curves up in the center. This will form the upper part of the platypus’s bill.
Step 2: Form the Lower Bill and Smile
From the bottom left of the first shape, draw a large, deep scoop that curves downward and extends out to the right. Finish the line on the right with a small, upward flick to create a cheerful smile line.
Step 3: Connect the Bill Sections
Draw a smooth, thick outline directly underneath the main scoop of the bill to give it thickness. Add a tiny curve on the far left and a slightly larger curve on the right to connect the upper and lower sections of the bill together securely.
Step 4: Outline the Left Cheek
Starting from the upper-left bridge of the bill, draw a line moving upward and outward to create the left cheek. Give it character by adding a few small, jagged tufts of fur pointing outward near the bottom.
Step 5: Shape the Top of the Head
Continue the line from the left cheek upward to form the top of the head. Create three distinct, forward-pointing jagged tufts of fur at the very peak, then begin a smooth curve downward to start forming the right side of the head.
Step 6: Complete the Head Outline
Finish the right side of the face by continuing the curve downward, mimicking the left side with a few small, jagged fur tufts. Curve the line inward at the bottom so it meets the right side of the bill’s smile line.
Step 7: Add Eyes, Eyebrows, and Nostrils
Inside the face, draw two small, vertical oval eyes placed symmetrically above the bill. Inside each eye, add a tiny circle for a highlight. Just above each eye, sketch a small, bean-shaped eyebrow. Finally, add two small, tilted oval nostrils near the front tip of the bill.
Step 8: Color Your Drawing
Bring your platypus face to life with color. Fill the entire fluffy head with a warm, sandy tan or light brown. Color the large bill in a solid, medium slate gray or charcoal shade. For the eyes, fill the ovals with solid black, keeping the tiny highlight dots crisp and white.
Step 1: Draw the Base of the Bill
Start by drawing a wide, flared shape that looks like an upside-down bucket or a bell. The top curve should be slightly rounded, narrowing slightly before flaring out wide and curving smoothly at the bottom.
Step 2: Add the Upper Part of the Bill
Directly on top of the first shape, draw a wavy, dome-like curve. This shape should sit perfectly on the upper edge of the base, extending slightly outward to the sides before rounding over the top.
Step 3: Draw the Cheeks and Lower Jaw
Add two small, curved lines on the outer sides where the upper and lower parts of the bill meet. Then, add a wide, shallow curve underneath the entire bottom edge to form the lower jaw of the bill.
Step 4: Add the Nostrils
Inside the main lower section of the bill, draw two small, slanted oval shapes side-by-side near the center to represent the nostrils.
Step 5: Start the Outer Head Outline
Extend two long, smooth curves upward from the lower sides of the bill. Curve them outward and upward, ending each side with a tiny, sharp zigzag to suggest a small tuft of fur.
Step 6: Complete the Top of the Head
Connect the two side fur tufts by drawing a large, smooth dome over the very top of the bill, completing the full round shape of the platypus’s head.
Step 7: Draw the Eyes
Position two large, expressive cartoon eyes just above the upper bill structure on either side. Each eye consists of a large outer circle, a smaller inner circle for the iris, a tiny circle inside for a highlight, and a small curved eyelash line on the outer edge.
Step 8: Color the Platypus
Bring the illustration to life with color. Fill the main head area with a warm, solid brown. For the entire bill structure (including the jaw and the small side cheek folds), use a solid, muted gray. Finally, color the nostrils black, fill the eyes with black, and leave the small circular highlights pure white.
Step 1: Draw the Base of the Bill
Begin by sketching a flat, elongated oval shape tilted at an angle to create perspective. Add a slight parallel line underneath it to give the front edge of the bill a bit of thickness.
Step 2: Add the Bill’s Base Crest
Draw a small, wavy arching line sitting on top of the rear end of the bill. This creates the characteristic shield-like crest where the bill meets what will be the face.
Step 3: Sketch the Front Face
Draw a large square with rounded corners around the crest of the bill. The bill should emerge from the lower-left section of this square, which will serve as the front plane of the platypus’s blocky head.
Step 4: Extend the Body Length Lines
From the top-left, top-right, and bottom-right corners of the front face square, draw three parallel lines extending backward and upward diagonally to establish the 3D depth of the rectangular body.
Step 5: Complete the 3D Block Body
Connect the ends of the three extension lines with a horizontal line across the top and a vertical line down the right side. This completes the solid, three-dimensional rectangular prism for the body.
Step 6: Attach the Webbed Feet
Underneath the body, add four short, blocky legs ending in wide, webbed feet with jagged, triangular toes. Position two feet along the front-left bottom edge and two along the back-right bottom edge to maintain the 3D perspective.
Step 7: Sketch the Flat Tail
From the rear vertical edge of the body, draw a large, flat, paddle-shaped tail extending outward. Give it a bit of thickness by adding a parallel line along its bottom rim.
Step 8: Detail the Face and Nostrils
On the front face, draw two large circular eyes on either side of the bill crest, adding smaller inner circles for the irises and highlights. On the lower tip of the bill, add two small, curved slit lines for the nostrils.
Step 9: Color the Block Platypus
Finish the artwork with color. Fill the main blocky head and body with a medium, warm brown. Coat the entire flat tail and all four webbed feet in a dark, grayish-brown. Color the prominent duck-like bill with a vibrant, solid orange. Finally, fill the irises and nostrils with black, leaving the small circular eye highlights crisp and white.
Step 1: Draw the Bill
Start by sketching the distinctive, duck-like bill. It should have a slightly bumpy upper edge, a rounded front tip, and a wide, smiling jawline that curves up at the back.
Step 2: Form the Head
Add a large, rounded shape above and behind the bill to complete the structure of the platypus’s head.
Step 3: Outline the Front Neck
Extend a smooth, downward-curving line from beneath the lower jaw to start the front section of the neck and chest.
Step 4: Begin the Front Legs
Draw two simple, curved, U-shaped outlines below the body line to mark the positions of the front two legs.
Step 5: Start the Lower Body
Extend a short, gentle curve from the back of the second front leg to form the beginning of the underbelly.
Step 6: Create the Back and Hind Leg
Draw a large, smooth arch starting from the back of the head to create the main body. Curve it down at the rear to form a thick, rounded hind leg.
Step 7: Complete the Underbelly
Add two subtle internal curves—one across the chest and one along the belly—to define the separation between the body and the underbelly.
Step 8: Add the Webbed Feet
At the bottom of each leg, attach wide, webbed feet featuring distinct, triangular toes.
Step 9: Form the Tail
Draw a large, flat, paddle-shaped tail extending outward from the rear of the body.
Step 10: Add Facial Details
Bring the character to life by adding two simple, solid oval eyes on the head and nostrils on the bill.
Step 11: Add Colors
– Main Body and Head: A warm, medium brown.
– Underbelly: A softer, light tan or cream color.
– Bill, Webbed Feet, and Tail: A matching dark charcoal or slate gray.
Step 1: Draw the Head
Start by drawing a large, rounded dome shape for the top of the head. Curve the sides slightly outward at the bottom to give the platypus chubby cheeks, leaving the very bottom open.
Step 2: Add the Body
From the bottom edges of the cheeks, draw a large, pear-shaped loop that flares out wide at the bottom to create a big, round belly.
Step 3: Outline the Front Arms
Inside the body shape, draw two short, curved lines pointing downward and slightly inward. These will form the base of the platypus’s front arms.
Step 4: Add the Front Webbed Feet
At the bottom of each arm, draw wide, fan-like webbed paws with four pointy tips to finish the front feet.
Step 5: Draw the Round Belly Patch
Connect the inner corners of the front feet with a large, smooth arching line that curves up across the middle of the body to form the belly patch.
Step 6: Add the Back Webbed Feet
Underneath the body, draw two more wide, webbed feet peeking out from the bottom left and bottom right corners.
Step 7: Draw the Paddle Tail
On the right side of the body, just above the leg, draw a large, smooth “C” shaped curve to create a thick, paddle-shaped beaver tail.
Step 8: Outline the Bill
Right in the middle of the face, draw a large, wide shape that looks like an upside-down pear or a smooth triangle. It should sit comfortably between the cheeks.
Step 9: Add the Mouth Detailing
Add a gentle curve along the very bottom of the bill to give it a soft smile.
Step 10: Add the Eyes and Nostrils
Draw two small, vertical ovals on either side of the top of the bill for the eyes. Inside the main lower section of the bill, add two short lines side-by-side near the center to represent the nostrils.
Step 11: Color the Platypus
Bring the drawing to life with color! Use a warm, medium brown for the main body, head, arms, and tail. Color the large belly patch a soft, light cream or tan color. Finally, fill in the bill and all four webbed feet with a dark grey-blue or charcoal color, and add two tiny white highlights inside the solid black eyes to make them sparkle.
Hopefully, this drawing tutorial on Platypus will help you easily create a cute drawing.
