You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a purse with simple steps.
Let’s get started!
Step 1: Establishing the Top Curve
Draw a singular, gentle horizontal curve. This initial line will serve as the top edge of the bag.
Step 2: Forming the Bag’s Body
Connect the ends of the previous curve with two descending, outward-sloping lines. Join the bottom of these lines with a final wide curve, completing the trapezoidal outline of the bag.
Step 3: Central Heart Motif
Add a basic heart shape to the center of the bag’s main body, setting the foundation for the decoration.
Step 4: Connecting the Ornament
Draw two curved lines extending upwards from the center and lobes of the heart, meeting at the top edge of the bag. This defines the triangular flap and completes the central ornament.
Step 5: Beginning the Strap
Attach a series of small, touching circles starting from the upper left corner of the bag and arcing slightly upwards and to the right to begin the hand strap.
Step 6: Extending and Completing the Handle
Extend the chain of circles, making it arc high over the bag before curving down on the right side. The final circle should join the upper right edge of the bag, completing a full hand strap.
Step 7: Final Touches and Detail
Draw a line that clearly separates the V-shaped top section of the bag from the main lower section. Finally, color the main body a light hue, the flap and entire handle yellow, and the central heart a deep red.
Step 1: Establishing the Initial Curve
Draw a singular, gentle horizontal curve at the upper-middle of the frame. This curve will establish the foundational shape for the top flap of the handbag.
Step 2: Defining the Bag’s Main Body
Extend two angled, slightly curved vertical lines down from each end of the initial curve. These lines should slope outwards. Complete the frame of the bag by joining the bottoms of these two vertical lines with a final wide curve. This trapezoidal-like frame defines the overall three-dimensional shape of the handbag’s body.
Step 3: Creating the Foundation for the Buckle
In the center-right of the bag’s front face, draw two concentric, rounded-corner rectangles, with the inner one slightly smaller. This structure forms the initial shape and position for the main buckle.
Step 4: Drawing the Main Flap
Contour Draw a large, wide ‘U’-shaped curve that starts from the top-left corner of the initial curve, sweeps down under the newly-formed buckle, and up to the top-right corner of the same curve. This defines the edge of the handbag’s main flap.
Step 5: Adding a Three-Dimensional Side Panel
Draw a single curved vertical line, running down from the top-left corner of the bag’s frame, closely parallel to the left-side frame line, and joining the bottom-left curve. This defines a side panel, giving the handbag immediate three-dimensional volume.
Step 6: Positioning the Strap Attachment Loops
Add two small, semicircular loops to the very top edge of the bag. One should be placed on the left side and the other on the right, marking the attachment points for the main handle.
Step 7: Creating the Arched Handle
Draw a large, arched handle extending between the two previously-placed semicircular loops. This handle should curve high above the bag in a smooth arc.
Step 8: Final Coloring and Details
Apply bright green to the main body and the side panel of the bag. Color the arched handle and the outer rounded rectangle of the buckle bright yellow. The two semicircular attachment loops and the inner section of the central buckle should be filled with a dark olive green. The remaining visible parts of the bag’s flap remain bright green. This step completes the illustration with a finished, colored look.
Step 1: Draw the Upper Frame
Begin by drawing a long, horizontal curved line that bends downward at the ends. This represents the top edge of the purse’s metal clasp.
Step 2: Add the Inner Frame
Create a second curved line just below the first one, following the same shape. Connect the ends to form a solid, slightly arched bar. This completes the main structure of the frame.
Step 3: Draw the Clasp Lock
On top of the frame, draw two small, interlocking shapes that look like rounded knobs or beads. These serve as the opening mechanism for the purse.
Step 4: Outline the Body
Starting from the bottom corners of the frame, draw a large, rounded “U” shape to form the pouch of the purse. The sides should curve outward slightly to give it a full, plump appearance.
Step 5: Add the Bottom Seam
Draw a curved line across the bottom of the pouch, following the contour of the base. This adds dimension and indicates the depth of the purse.
Step 6: Add a Decorative Detail
To personalize your drawing, add a small heart shape on the lower right side of the pouch. You can draw a smaller heart inside it to create a layered or “sticker” effect.
Step 7: Finalize with Color
Finish your artwork by filling in the different sections. Use a metallic shade for the frame and clasp, a bold color for the main body, and a contrasting hue for the decorative heart to make it stand out.
Step 1: Draw the Flap Outline
Start by drawing a shape that looks like a wide, rounded “U” or a shallow bowl. The top edge should be straight, and the sides should curve in to meet at a rounded bottom point. This forms the front flap of the handbag.
Step 2: Add the Button
In the center of the flap’s rounded bottom point, draw a small, clean circle. This will serve as the button for the bag’s clasp.
Step 3: Outline the Bag Body
From the top outer corners of the flap, draw two larger curved lines that sweep outwards and then downwards. Connect these lines at the bottom with a gently curved horizontal line to create the wide, rounded body of the bag.
Step 4: Add the Base Panel
Draw a curved horizontal line across the lower section of the bag’s body, following the contour of the bottom edge. This creates a separate panel for the base, giving the bag more structure.
Step 5: Attach the Handle
From the top straight edge of the flap (one point on each side, near the corners), draw a tall, arched line that goes up, curves over, and comes back down, attaching to the other corner. Draw a second, parallel line inside this arch to give the handle thickness.
Step 6: Color and Finalize
Finish your drawing by applying color. Use a rich, warm brown for the main body and handle. A slightly darker shade of brown can be used for the base panel. For a final touch of contrast, color the center button a bright, solid yellow.
Step 1: Base Line
Begin with a single, straight horizontal line that determines the top edge of the bag.
Step 2: Main Body Outline
Draw a wide trapezoid shape below the horizontal line, with curved bottom corners and slightly angled sides, forming the main body of the handbag. This shape should be wide and sit symmetrically beneath the original line.
Step 3: Inner Structure
Add a small, centered, rounded square shape in the middle of the main body’s surface, marking the future position of the clasp.
Step 4: Flap and Lock
Draw a large, smooth curved line extending from the left corner of the top edge, sweeping down through the bottom of the rounded square (the clasp), and curving back up to the right corner of the top edge. This creates the flap and integrates the lock into the curve.
Step 5: Detail the Outer Panels
Add two subtle, curved vertical lines that taper outwards from near the center of the bottom line up towards the bottom corners, defining separate panel sections on the bag’s body.
Step 6: Eyelet Positions
Place two small, open circle shapes onto the flap, positioned horizontally apart and centered above the lock, to mark where the handle will attach.
Step 7: Adding the Handle and Hardware
Complete the functional structure by drawing a large, central, semi-circular handle arc that attaches to the eyelets. Also, connect the eyelets down to the top edge of the flap, finalizing the attachment points.
Step 8: Applying Final Texture and Style
Apply solid color fills to distinct areas of the drawing, while preserving all the structural and detailed lines created in the previous steps, to give the icon its finished, colored, vector art look.
Step 1: Horizontal Reference Line
Start by drawing a single, straight horizontal line. This will serve as the top edge of the handbag’s flap.
Step 2: The Semi-Circular Flap
Draw a large, wide “U” shape or a deep curve that connects to both ends of the horizontal line, creating a semi-circle that forms the main flap of the purse.
Step 3: Handle Attachments
Add two small, identical rectangular blocks sitting on top of the horizontal line. Position them symmetrically, spaced apart, to serve as the base hardware for the handle.
Step 4: The Rounded Handle
Draw a large semi-circular arc connecting the two rectangular bases. Draw a second, slightly smaller arc just inside the first one to give the handle some thickness.
Step 5: Outline the Main Body
Extend the sides of the purse by drawing two curved lines that start from the edges of the top flap and flare outward. Connect these sides with a long, slightly curved horizontal line at the bottom to form the base of the bag.
Step 6: Decorative Side Panels
Add two inward-curving lines on the lower body of the bag. These lines should start from the bottom edge of the flap and curve down toward the bottom corners, defining the side gussets or panels of the purse.
Step 7: The Front Clasp
Draw a clasp in the center where the flap meets the body. Create this by drawing a rounded, mushroom-like shape that overlaps the bottom edge of the semi-circular flap.
Step 8: Final Colors and Finishing
Complete the illustration by filling the different sections with color. Use contrasting tones for the side panels, the main body, and the hardware to make the details pop.
Hopefully, this drawing tutorial on Purse will help you easily create a nice drawing.
