You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a radio with simple steps.
Let’s get started!
Step 1: Draw the Main Body
Start by drawing a horizontal rectangle to form the main body of the radio. The top edge should be slightly curved or convex.
Step 2: Add the Handle
Draw a large rectangular loop on top of the main body for the carrying handle. Add a smaller, parallel loop inside it to give the handle thickness.
Step 3: Draw the Antenna
On the left side of the top edge, draw a thin diagonal line extending upwards for the antenna mast. Draw a small circle at the very top of the mast.
Step 4: Add Control Knobs/Lights
Draw two small, identical circles (or dots) on the upper left area of the radio’s front face. These represent indicator lights or small control knobs.
Step 5: Outline the Speakers
Draw two large, identical circles on the lower section of the radio’s front face, positioned symmetrically on the left and right sides. These are the outlines for the speakers.
Step 6: Detail the Speakers
Inside the two speaker circles, draw a criss-cross or lattice pattern (a grid of diagonal lines) to represent the speaker grilles.
Step 7: Draw the Display/Tuner Window
In the center space between the two speakers, draw a small horizontal rectangle. This will be the cassette compartment or the tuner/display window.
Step 8: Add Control Buttons
Below the central rectangle, draw a row of four small squares (or rectangles) to represent control buttons (like play, stop, rewind, fast-forward).
Step 9: Color the Radio
Color the main body of the radio (the large rectangle) blue. Color the handle and the antenna gray. Color the central display/buttons area a darker gray to differentiate the controls.
Step 1: Draw the Main Body
Begin by drawing a horizontal oval-like shape with flattened top and bottom edges, and rounded sides. This forms the main body of the radio.
Step 2: Add the Handle
On the top center of the main body, draw a curved rectangular shape for the carrying handle. Add a smaller, parallel curve inside it to give the handle thickness.
Step 3: Draw the Antenna
Draw a diagonal double line extending from the top of the radio, behind the handle, upwards to the left. At the end of this line, draw a small circle for the antenna tip.
Step 4: Outline the Speakers
Draw two large, oval shapes on the front face of the radio, one on the left and one on the right, for the speakers.
Step 5: Detail the Speakers
Inside each of the speaker ovals, draw a criss-cross pattern (a series of intersecting diagonal lines) to represent the speaker grilles.
Step 6: Draw the Display/Tuner Window
In the center of the radio’s front face, between the two speakers, draw a horizontal rectangle. Inside this rectangle, draw two small circles to represent tuner knobs or indicators.
Step 7: Add Top Control Buttons
Above the central rectangular display, draw a row of three small circles evenly spaced. These represent control buttons or lights.
Step 8: Add Bottom Control Buttons
Below the central rectangular display, draw another row of three small circles, similar to the top ones, for more control buttons.
Step 9: Color the Radio
Color the main body of the radio a teal or light blue-green. Color the handle and antenna light gray. Color the speakers a medium gray, and the speaker grilles can be a slightly darker gray. Color all the control circles and the central display rectangle a darker gray.
Step 1: Draw the Main Body
Draw a large horizontal rectangle with rounded corners to form the main body of the radio.
Step 2: Add the Handle
On the top center, draw a thick, curved handle shape. Use a parallel line inside to show the thickness.
Step 3: Draw the Antenna Mast
On the upper right side of the body, draw a vertical, tapered antenna mast with a small flat top.
Step 4: Add a Top Button/Switch
Draw a small, curved rectangular shape just under the handle on the top edge of the radio. This represents a power switch or eject button.
Step 5: Outline the Speaker
Draw two concentric circles (a large circle with a slightly smaller circle inside it) on the left side of the radio’s front face for the single speaker.
Step 6: Detail the Speaker
Inside the inner speaker circle, draw a criss-cross pattern (a grille).
Step 7: Draw the Tuner Display
On the right side of the radio, draw a horizontal rectangle for the tuner display/window. Inside this rectangle, draw a thin line with a small indicator box on it (like a sliding tuner scale).
Step 8: Add Control Knobs
Below the tuner display, draw two large, symmetrical circles for the main control knobs (like volume and tuning).
Step 9: Color the Radio
Color the main body of the radio a teal or light blue-green. Color the handle and antenna a medium blue-gray. Color the speaker’s outer ring and the control knobs red. Color the speaker grille a dark brown or black, and the tuner display area a light gray. Color the top switch yellow.
Step 1: Draw the Top Bar of the Handle
Start by drawing a long, thin horizontal rectangle. This will form the top bar of the carrying handle.
Step 2: Draw the Handle Supports
Draw two curved, parallel lines extending downwards from both ends of the top bar. These lines should stop near where the top of the main body will be. This completes the outline of the handle.
Step 3: Draw the Main Body
Draw a large horizontal rectangle with slightly rounded corners underneath the handle. The top of this rectangle should align horizontally with where the handle supports end. This is the main casing of the boombox.
Step 4: Draw the Control Panel Divider
Just beneath the handle, draw a thin horizontal line across the width of the radio body. This separates the top control panel area from the main front face.
Step 5: Add Tape Deck Controls
In the narrow control panel area created in Step 4, draw a row of small, rectangular shapes (or squares) to represent the function buttons (like play, stop, rewind, etc.). Add a slightly larger rectangular button to the right for power or record.
Step 6: Draw the Front Panel Divider
Draw a second horizontal line across the main front face of the radio, roughly dividing the face into a smaller top section and a larger bottom section. This line helps establish the area for the speakers and cassette deck.
Step 7: Outline the Speakers
Below the line from Step 6, draw two identical sets of concentric circles (a larger circle with a smaller circle inside) placed symmetrically on the left and right sides. These represent the speakers.
Step 8: Draw the Cassette Door/Display
In the center space between the two speakers, draw a vertical rectangular shape with a slightly rounded top. This is the opening for the cassette tape door or a large central display.
Step 9: Add Detail to the Cassette Door
Near the top of the cassette door/display area, draw two short horizontal parallel lines. These could represent a small display screen or a latch mechanism.
Step 10: Complete the Cassette Door Detail
Inside the cassette door area, draw a square shape to represent the visual window where the cassette tape would be seen.
Step 11: Add Cassette Controls and Display
Draw a small horizontal rectangle in the upper-middle section for an additional display or level meter. Draw a row of four small squares at the bottom of this area. These represent secondary function buttons, perhaps for equalizer presets or radio tuning.
Step 12: Color the Radio
Color the boombox using bright, contrasting shades to complete the cartoon style. The main body is green, the upper front strip below the handle is red, and the handle is blue. The speakers have blue outer rings, gray centers, and dark gray or black inner circles. The cassette/display area uses vivid colors: red for the border, blue for the tape window, yellow above it, and orange or red for the small buttons. Finally, the top controls are teal or green, with the large end button in yellow.
Step 1: Draw the Main Body Outline
Start by drawing a long, horizontal rounded rectangle (an elongated oval) to form the main casing of the radio.
Step 2: Add the Handle Outline
On the top center of the main body, draw a thick, curved handle shape. Use a parallel inner curve to show the handle’s thickness.
Step 3: Draw the Feet
Draw two small, curved shapes projecting slightly downwards from the bottom edge of the radio. These act as the feet or base supports.
Step 4: Add Top Controls
Draw a row of five small, identical vertical rectangles just beneath the handle. These represent function buttons or equalizer sliders.
Step 5: Outline the Speakers
Draw two large, symmetrical circles on the front face of the radio, one on the left and one on the right, for the speakers.
Step 6: Detail the Speaker Grilles
Inside the two speaker circles, draw a simple grid or lattice pattern (intersecting horizontal and vertical lines) to represent the speaker grilles.
Step 7: Add Control Knobs
Draw a row of five small, identical circles in the center area above the speakers. These represent control knobs or indicator lights.
Step 8: Draw the Cassette Deck
In the space below the control knobs, draw a horizontal rectangle for the cassette deck door. Inside this rectangle, draw a smaller, stylized rectangle representing the cassette tape itself. Add two small circles inside the cassette shape to represent the spools.
Step 9: Color the Radio
Color the radio with bright, lively tones to make it stand out. The main body should be purple, while the speaker grilles are light blue or cyan. The handle is yellow or orange, and the top buttons under it feature a rainbow of colors like green, yellow, orange, and blue. The control knobs in the center can be colored green, red, blue, orange, or yellow. Finally, the cassette deck has a yellow or orange door with a medium gray or purple cassette inside.
Step 1: Draw the Main Body
Draw a wide horizontal rectangle with rounded corners.
Step 2: Add the Handle
Draw a thick, curved handle on the top center.
Step 3: Divide the Body
Draw two vertical lines down the face of the radio, dividing it into three equal panels (two outer speaker panels and one central control/tape panel).
Step 4: Add Indicator Lights
Draw one small circle on the upper part of the left panel and one small circle on the upper part of the right panel.
Step 5: Outline the Speakers
Draw one large circle inside the left panel and one large circle inside the right panel for the speakers.
Step 6: Detail the Speaker Grilles
Draw a grid pattern (intersecting vertical and horizontal lines) inside the two speaker circles.
Step 7: Add Top Central Controls
In the upper part of the central panel, draw a row of four small squares for controls.
Step 8: Draw the Cassette Deck
Draw a horizontal rectangle below the top controls for the cassette deck door. Inside, draw a stylized cassette tape shape with two small circles for the spools.
Step 9: Color the Radio
Color the outer panels light blue/cyan and the central panel orange. Color the handle red. Use contrasting colors for the buttons, spools, and grilles (e.g., yellow grilles, various colors for the small buttons).
Hopefully, this tutorial on Radio will help you easily create a nice drawing.
