You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a rubik’s cube with simple steps.
Let’s get started!
Step 1: Draw the Top Face
Start by drawing a parallelogram to represent the top flat surface of the cube in perspective.
Step 2: Draw the Left Side
Extend two vertical straight lines downward from the front-left corner and the far-left corner of the parallelogram. Then, connect their bottom endpoints with a line parallel to the front-left edge of the top face.
Step 3: Complete the Outer Cube Shape
Draw a vertical line downward from the far-right corner of the top face. Connect the bottom-center corner to this new vertical line with a straight line, finishing the basic 3D outline of the cube.
Step 4: Add Vertical Grid Lines on the Right Side and Top
Draw two evenly spaced parallel lines running vertically across the right face. Continue these two lines straight across the top face to divide it into three vertical columns.
Step 5: Add Grid Lines on the Left Side and Top
Draw two evenly spaced lines running horizontally across the top face to form a 3×3 grid. Continue these two lines vertically downward across the left face of the cube.
Step 6: Add Horizontal Grid Lines Around the Sides
Draw two evenly spaced horizontal lines across the left face and continue them across the right face. This completes the 3×3×3 grid pattern on all three visible sides of the Rubik’s Cube.
Step 7: Color the Rubik’s Cube
Color the top face yellow, the left face red, and the right face green. Keep all line borders clean and black to complete the Rubik’s Cube drawing.
Step 1: Draw the Inner Center Axis
Start by drawing three lines meeting at a central point—one extending pointing upward to the right, one extending downward to the left, and one extending downward to the right.
Step 2: Form the Upper Left Face
Draw two lines starting from the ends of the upper and far-left lines, connecting them to complete the upper-left diamond shape.
Step 3: Form the Upper Right Face
Draw two additional lines connecting the top endpoint and the far-right endpoint to form the upper-right diamond face.
Step 4: Form the Bottom Face
Draw two lines extending downward from the left and right outer corners, meeting at a point at the bottom to complete the 3D cube structure.
Step 5: Grid the Upper Left Face
Draw four grid lines across the upper-left face (two parallel lines in each direction) to divide it into a 3×3 grid of smaller squares.
Step 6: Grid the Upper Right Face
Draw four grid lines across the upper-right face in the same pattern to divide it into a 3×3 grid.
Step 7: Grid the Bottom Face
Draw four grid lines across the bottom face to form its 3×3 grid pattern, completing all square faces of the Rubik’s Cube.
Step 8: Color the Scrambled Rubik’s Cube
Color each individual square of the cube’s faces using a scrambled combination of red, blue, green, yellow, orange, and white/light grey, while keeping all boundary outline lines solid black.
Step 1: Draw the Top Parallelogram
Draw a flat parallelogram near the top of your drawing area to form the top surface of the upper layer.
Step 2: Complete the First Layer Block
Extend three vertical lines downward from the left, center, and right corners of the parallelogram, then connect their bottom endpoints to outline the first thin rectangular block.
Step 3: Sketch the Outline for the Middle Layer
Below the first block, draw two angled lines pointing outward to indicate the rotated position of the middle layer.
Step 4: Form the Middle Layer Block
Draw the vertical sides and bottom edges extending from the middle layer outline to form a complete rotated rectangular layer directly underneath the top layer.
Step 5: Sketch the Outline for the Bottom Layer
Below the middle layer, draw angled lines pointing outward in the opposite direction to set up the bottom layer’s orientation.
Step 6: Form the Bottom Layer Block
Add the vertical lines and bottom connecting edges to complete the shape of the third rectangular layer at the base.
Step 7: Add Grid Lines to the Top Surface
Draw a 3×3 grid pattern on the top surface of the uppermost layer by drawing two sets of parallel lines across it.
Step 8: Add Vertical Dividers on All Three Layers
Draw vertical dividing lines down the visible side faces of all three rotated layers to create individual square segments for each layer.
Step 9: Color the Rubik’s Cube
Color the top grid surface bright yellow. Color the left-facing side panels bright red, the right-facing side panels bright blue, and fill the small exposed gaps between the rotated layers with solid black to give depth to the twisted Rubik’s Cube.
Step 1: Draw the Top Diamond Surface
Draw a flat diamond shape with slightly rounded corners near the top of your drawing area to represent the top face of the upper layer.
Step 2: Draw Vertical Lines and Center Dividers for the Upper Layer
Extend vertical lines downward from the four corners and draw two central vertical lines down the front sides of the upper block to divide each visible side in half.
Step 3: Complete the Upper Layer Base
Connect the lower ends of the vertical lines on the front-left and front-right sides to form the bottom edges of the top block.
Step 4: Sketch the Rotated Outline for the Lower Layer
Below the top block, draw two angled lines pointing outward to outline the rotated top surface of the bottom layer.
Step 5: Draw Vertical Edges for the Lower Layer
Extend vertical lines downward from the corners and center dividing points of the rotated bottom shape to form the sides of the lower layer.
Step 6: Complete the Lower Layer Base
Connect the bottom endpoints of the lower vertical lines to complete the structure of the bottom layer.
Step 7: Add Grid Lines to the Top Face
Draw two intersecting lines forming a cross across the top diamond surface to divide it into a 2×2 grid.
Step 8: Color the Twisted Rubik’s Cube
Color the four squares on the top surface bright yellow. On the upper layer, color the far-left side green, the middle-left side dark blue, the middle-right side red, and the far-right side orange. On the lower layer, color the front-left side green, the front-right side dark blue, the far-right side red, and the back-right visible edge orange. Finally, fill the inner gaps between the rotated layers with solid black to give the cube depth.
Step 1: Draw the Top Diamond
Draw a wide diamond shape near the top of the canvas to form the main outline of the top surface.
Step 2: Add Inner Parallelogram on the Top Surface
Inside the diamond shape, draw a horizontal rectangular shape with slanted side edges (a parallelogram) across the center.
Step 3: Draw the Left Vertical Side Outline
Extend two long vertical lines downward from the left corners of the diamond and connect their bottom endpoints with a slanted line to form the left outer boundary.
Step 4: Draw a Slanted Rectangle on the Left Face
Inside the left vertical face, draw a tilted rectangular shape connecting the middle points of the left edges.
Step 5: Draw the Right Vertical Outer Edge
Extend a vertical line downward from the far-right corner of the top diamond and connect it to the bottom-center point with a slanted line.
Step 6: Draw a Slanted Rectangle on the Right Face
Inside the right vertical face, draw another tilted rectangular shape mirroring the one on the left.
Step 7: Color the Twisted Cube
Fill the top center section with green, the top back and front triangular sections with light red, the top-left triangle with yellow, and the top-right triangle with blue. On the left face, color the central tilted rectangle white, the bottom-left triangle yellow, the top-left triangle light red, the inner top triangle dark red, and the inner bottom triangle dark red. On the right face, color the central tilted rectangle light red, the middle inner triangle dark blue, the middle lower triangle white, the bottom triangle green, and the outer right triangles blue and light red.
Step 1: Draw the Top Diamond Face
Draw a large diamond shape near the top of your drawing area to establish the top face of the upper layer.
Step 2: Complete the Upper Layer Box
Extend short vertical lines downward from the left, front, and right corners of the diamond, then connect their bottom endpoints with slanted lines to form the solid upper block.
Step 3: Sketch the Rotated Lower Base Outline
Below the top layer, draw two angled lines extending downward to outline the visible top corners of the twisted bottom layer.
Step 4: Draw the Lower Layer Body
Extend long vertical lines downward from the visible corners of the rotated lower shape and connect them at the bottom corner to form the main structure of the lower block.
Step 5: Add Grid Lines to the Top Surface
Draw two sets of parallel lines across the top diamond face to divide it into a 3×3 grid of nine small squares.
Step 6: Add Vertical Lines to the Upper Layer Sides
Draw vertical dividing lines down the front-left, front-right, and side faces of the upper block, aligning them with the top grid lines to separate the top layer into individual stickers.
Step 7: Add Grid Lines to the Lower Layer Front-Left Face
Draw a grid of intersecting horizontal and vertical lines across the front-left face of the lower layer to divide it into a 3×2 grid.
Step 8: Add Grid Lines to the Lower Layer Front-Right Face
Draw a matching grid of intersecting lines across the front-right face of the lower layer to complete the stickers on the bottom block.
Step 9: Color the Twisted Rubik’s Cube
Fill each sticker on the cube with its corresponding color:
– Top Face: Color the top-left square dark blue, top-middle yellow, top-right dark blue, middle-left white, center orange, middle-right green, bottom-left red, bottom-middle white, and bottom-right dark blue.
– Upper Side Faces: Color the visible front-left stickers white, green, and red from left to right. Color the front-right stickers dark blue, yellow, and red from left to right.
– Lower Side Faces: On the bottom block’s left face, color the stickers with a mix of orange, white, yellow, dark blue, and green. On the right face, color the stickers mostly green and yellow.
– Inner Shadow Gap: Color the exposed top surfaces between the rotated upper and lower layers dark grey to add depth.
Hopefully, this drawing tutorial on Rubik’s Cube will help you easily create a nice drawing.
