Satellite Drawing Tutorial - How to draw Satellite step by step

1. Easy Satellite Drawing Tutorial for Beginners

Today, drawing123.com will guide you how to easily draw a Satellite with simple steps.

Let’s get started!

Step 1: Basic Shape

Start by drawing a slightly tilted rounded rectangle. This will be the main body of the satellite.

Step 2: Divide the Main Body

Draw two parallel horizontal lines across the rounded rectangle. These lines will divide the main body into three sections.

Step 3: Bottom Detail

Draw a small, inverted ‘U’ shape protruding from the bottom left side of the main body.

Step 4: Top Detail

Draw two small vertical lines sticking out from the top right side of the main body.

Step 5: Begin the Satellite Dish

From the top right of the main body, draw a straight line going up, and then draw a downward-facing semicircle connecting to that line. This will be the upper part of the satellite dish.

Step 6: Complete the Satellite Dish

Draw a small circle at the very top of the straight line you drew in the previous step.

Step 7: Side Extensions

Draw two small parallel lines protruding from the middle of each side of the main body. These will be the connection points for the solar panels.

Step 8: Begin the Solar Panels

From each pair of parallel lines you drew in the previous step, draw a large rounded rectangle. This will be the frame for the solar panels.

Step 9: Solar Panel Details

On each large rounded rectangle, draw two vertical and two horizontal lines to create a grid, simulating the solar panel cells.

Step 10: Coloring

Now that you have completed the outline, color the satellite! The main body is orange-red with yellow bands, the satellite dish is orange-red, and the solar panels are light blue.

2. How to Draw a Satellite Step by Step for Kids

Step 1: Basic Body Shape

Start by drawing a slightly tilted rounded rectangle. This is the main body of the satellite.

Step 2: Central Sensor/Camera

Draw two concentric circles (a small circle inside a larger one) in the center of the body.

Step 3: Antenna and Side Connectors

Draw four short antenna lines sticking out from the top/bottom edges of the body, and two short connecting lines on each side.

Step 4: Exhaust/Camera

Draw a trapezoid shape protruding from the bottom right side of the body for a camera or exhaust nozzle.

Step 5: Solar Panel Frame and Mounts

Draw two large rounded rectangles (the solar panel frames) attached to the side connectors on the body.

Step 6: Panel Grids

Add grid lines (horizontal and vertical) inside the solar panel frames to create the cells.

Step 7: Communication Dish

Draw a shallow, wide semicircle on the top left side of the body for the main communication dish.

Step 8: Dish Antenna

Inside the dish, draw a small circle and several lines radiating from it down to the dish’s center line.

Step 9: Coloring

Color the satellite. The body and nozzle are yellow, the dish is yellow with a green antenna, the central sensor is blue/teal, and the solar panels are light blue with dark green frames.

3. Simple Space Satellite Drawing for Kids

Step 1: Basic Body Shape

Start by drawing a slightly tilted rounded square or diamond shape. This is the main body of the satellite.

Step 2: Central Sensor/Camera

Draw two concentric circles (a small circle inside a larger one) in the center of the body.

Step 3: Side Details

Draw a small rounded rectangle protruding from the top-right and bottom-left edges of the main body. These might be connectors or smaller auxiliary devices.

Step 4: Bottom Thruster/Nozzle

Draw a series of small, concentric, rounded shapes extending from the bottom of the body, ending with a small curved line, to represent a thruster or engine nozzle.

Step 5: Start the Dish

Draw a line up from the top-right of the body and attach a large, downward-facing semicircle (the main communication dish) to it.

Step 6: Dish Antenna and Signal

Draw a small circle on a short line extending from the center of the dish. Add three concentric arcs near the circle to represent a signal being transmitted.

Step 7: Solar Panel Connectors

Draw two small parallel lines sticking out from the top-left and bottom-right edges of the main body (where the side details from Step 3 are). These are the mounting points for the solar panels.

Step 8: Solar Panels

Attach a large rounded rectangle to each mounting point. Draw a grid (horizontal and vertical lines) inside each rectangle to detail the solar cells.

Step 9: Coloring

Color the satellite. The main body and dish are light gray/lavender. The central sensor and antenna circle have blue and pink accents. The solar panels are light blue with light gray frames.

4. Learn to Draw a Cool Satellite – Fun Drawing Lesson

Step 1: Basic Body Segments

Start by drawing two slightly tilted rounded rectangles. The one on the left is a bit more square, and the one on the right is more rectangular. They should be positioned close together.

Step 2: Connectors and End Detail

Connect the two body segments with two parallel horizontal lines. Add two small vertical lines to the top-left of the squarer segment, and a small, rounded ‘U’ shape to the bottom-right of the rectangular segment.

Step 3: Begin the Dish

From the top of the squarer body segment, draw a short line upwards. Then draw a large oval shape on its side, making it look like a parabolic dish.

Step 4: Dish Antenna and Supports

In the center of the dish, draw a small circle with a dot in the middle. Connect this circle to the edges of the dish with three straight lines.

Step 5: Solar Panel Connectors

Draw two short horizontal lines protruding from the middle of the left side of the squarer body segment, and two similar lines from the middle of the right side of the rectangular body segment.

Step 6: Solar Panel Frames

Attach a large rounded rectangle to each pair of lines from the previous step. These are the frames for the solar panels.

Step 7: Solar Panel Grids

Add detail to the solar panels by drawing a grid (horizontal and vertical lines) inside each frame.

Step 8: Coloring

Color the satellite. The body segments are light gray. The communication dish is orange with a light gray antenna. The solar panels are light blue.

5. Step-by-Step Guide: Draw Your Own Satellite

Step 1: Main Body

Draw a square with slightly rounded corners. Inside, draw two small circles horizontally near the top edge for sensors or windows.

Step 2: Bottom Connectors

Draw two short vertical lines sticking out from the bottom center of the main body.

Step 3: Lower Module

Draw a smaller, wider rectangle below the main body, connected by the lines from Step 2. Divide this new rectangle into an upper and lower section with a horizontal line. Add a vertical line in the lower section, dividing it in half.

Step 4: Thruster/Nozzle

Below the lower module, draw two concentric, rounded shapes to form the thruster or engine nozzle.

Step 5: Solar Panel Frames

Extend the width of the satellite by drawing two large square frames on the left and two on the right, horizontally aligned with the main body. These represent the solar panels.

Step 6: Panel Grids

Add detail to the solar panels by drawing one horizontal and one vertical line inside each of the four panel frames, creating four cells per panel.

Step 7: Panel Connecting Rod

Draw a horizontal line connecting the outermost panel to the innermost panel on each side. This represents the structural beam holding the panels.

Step 8: Top Antenna Connectors

Draw two small vertical lines sticking out from the top center of the main body.

Step 9: Communication Dish

Draw a short vertical line extending from the top of the body (from the lines in Step 8). On top of this, draw a large, shallow semi-circle/dish shape. Add a small circle on a rod in the center of the dish, and draw three concentric arcs above it to show a transmitted signal.

Step 10: Coloring

Color the satellite. The body and lower module are orange, the thruster is red and gray, and the solar panels are light blue. The dish is blue with a yellow rim and a yellow/blue antenna.

6. Space Art for Kids: Easy Satellite Drawing Ideas

Step 1: Bottom Antenna/Sensor Cone

Start by drawing a truncated cone shape (a trapezoid with a curved bottom). This will be the lower sensor or antenna cone.

Step 2: Antenna Mount

Draw three lines extending downwards from the center of the cone, meeting at a small circle at the very bottom. This forms the primary sensor/antenna structure.

Step 3: Lower Body Cylinder

Draw two parallel vertical lines extending upwards from the top edge of the cone. This starts the main cylindrical body.

Step 4: Upper Body Cylinder

On top of the lines from Step 3, draw a wider cylindrical section. Connect the bottom of this new cylinder to the lower section with a smooth curve to indicate wrapping or overlapping.

Step 5: Top Cap/Antenna Base

Draw a small, decorative cap shape on the very top of the upper cylinder.

Step 6: Sensor/Thruster Details

Add circular details to the body: one circle centered in the upper cylinder, and two vertically aligned circles centered in the lower cylinder.

Step 7: Solar Panel Connectors

Draw two short horizontal lines protruding from the left and right sides of the lower cylinder section. These are the connection points for the solar panels.

Step 8: Solar Panel Frames

Draw a large, tilted rectangle (or a trapezoid on its side) extending from each set of lines drawn in Step 7. These are the frames for the inner solar panels.

Step 9: Outer Solar Panel Mounts

From the inner panel frames, draw another set of short horizontal lines extending outwards.

Step 10: Outer Solar Panel Frames

Draw a second large, tilted rectangular frame attached to the mounts from Step 9 on both the left and right sides. These are the frames for the outer solar panels.