Saxophone Drawing Tutorial - How to draw Saxophone step by step

1. Draw a Saxophone with This Easy Beginner Method

Today, drawing123.com will guide you how to easily draw a saxophone with simple steps.

Let’s get started!

Step 1: Draw the Outer Rim of the Bell

Start by drawing a tilted, slightly elongated oval in the lower right portion of your canvas. This will form the outermost edge of the saxophone’s bell.

Step 2: Add Inner Details to the Bell

Inside the oval you just drew, add depth by sketching a smaller, concentric oval. Then, draw two curved intersecting lines running along the inner side to create the opening and structure of the bell rim.

Step 3: Sketch the Main Body and Neck

From the bottom and left sides of the bell, extend a smooth, U-shaped curve upwards to form the lower bow. Continue drawing this curve all the way up to create a long, tapered tube for the body. At the top, bend the tube horizontally to the left with a smooth, wavy curve to form the neck of the instrument.

Step 4: Attach the Mouthpiece

At the very tip of the horizontal neck tube, draw a small, slightly curved rectangular band. From that band, extend a pointed shape resembling a bird’s beak pointing to the left to form the mouthpiece.

Step 5: Draw the Keys

Along the front vertical edge of the main body tube, sketch a neat row of five small, evenly spaced circles. These circles will serve as the saxophone keys.

Step 6: Color the Instrument

Color the primary body, neck, and outer bell with a vibrant, solid yellow. Use a darker, golden-brown hue for the interior of the bell to give it a sense of depth. Fill the row of circular keys with a soft, off-white or cream color. Color the mouthpiece with a contrasting reddish-orange shade.

2. Beginner Friendly Way to Draw a Classic Saxophone

Step 1: Drawing the Mouthpiece

Draw a small, tapering shape with a slightly flared end in the upper right. This simple form represents the fundamental mouthpiece of the saxophone.

Step 2: Forming the Neck

Draw two long, smooth, undulating parallel lines, curving sharply down and then slightly back, to form the upper neck of the instrument.

Step 3: Creating the Bell Curve

From the bottom end of the previous lines, draw a single, large, continuous U-shaped curve that defines the bottom of the saxophone’s large bell section.

Step 4: Defining the Bell Inner Line

Draw an additional curve nestled just above and parallel to the lowest part of the U-shaped curve to define the detailed lower lip of the bell.

Step 5: Adding the Outer Bell Rim

Draw an inner curve within the larger oval shape created in Step 3 to establish the internal lip and opening of the main bell section.

Step 6: Adding the Main Keys

Draw three large, evenly spaced circles down the front length of the main body tube to create the fundamental keys.

Step 7: Key Connections

Draw a series of small, short perpendicular and horizontal lines to connect the main circular keys to the saxophone body tube.

Step 8: Final Mechanical Details

Draw two long parallel lines extending down the length of the body to represent the main rod mechanism connecting the keys, finalizing the technical structure.

Step 9: Final Coloring

Color the mouthpiece a deep blue-purple. The main body, neck, and bell section should be a vibrant gold. The large circular keys are colored a light orange. The inner lip of the bell and some connecting parts are colored a darker brown-orange.

3. How to Draw a Colorful Saxophone with Simple Instructions

Step 1: Draw the Saxophone Bell Rim

Start by drawing a tilted rectangle that serves as the rim of the saxophone’s bell. Then, extend two downward-curving lines from the bottom of the rectangle to begin the body of the bell.

Step 2: Form the U-shaped Bow

Add a small horizontal band across the two curved lines drawn previously. From under this new band, extend a large U-shaped curve that loops upward to form the bottom bow of the instrument.

Step 3: Add the Bow Collar

Draw another thin, flat rectangle or collar at the left end of the U-shaped bow.

Step 4: Draw the Body and Neck

Draw a long vertical tube extending straight up from the bow collar. At the top of this tube, curve it smoothly to the left to form a wavy, horizontal neck.

Step 5: Add the Mouthpiece

Draw a tapered, wedge-like mouthpiece attached to the tip of the left-facing neck. Divide it with a couple of internal vertical lines.

Step 6: Add the Side Keys

Draw four small, evenly spaced D-shaped or half-circle keys attached by short horizontal connectors along the upper right side of the main vertical body.

Step 7: Add Tone Holes or Pearls

Draw three small circles in a vertical line near the lower part of the main body tube.

Step 8: Attach the Thumb Rest or Lower Guard

Add a small rounded capsule shape to the lower left side of the main body, connecting it with two short parallel horizontal lines.

Step 9: Color the Artwork

Apply vibrant colors to finish the saxophone. Color the mouthpiece a dark gray with a red stripe. The long main body and neck are colored bright blue, while the three tone hole circles on it are pink. The side keys are colored purple. For the lower section, the bow at the bottom is purple, the inside of the bell flares out in a bold red, and the accent rims or bands are highlighted in a bright golden-yellow. The thumb rest on the left is colored dark pink.

4. Simple Steps to Draw a Saxophone for New Artists

Step 1: Draw the Rod Protection Guard

In the first step, draw a long, thin vertical rod with rounded ends. This will serve as part of the key mechanism guard on the main body.

Step 2: Add Connecting Screws

Next, attach three short, horizontal parallel bars sticking out from the right side of the vertical rod.

Step 3: Draw the Upper Key Pads

Draw three small circles centered onto the ends of the three horizontal bars you just added.

Step 4: Add the Lower Key Pads

Directly underneath the first three circles, draw two more circles of a similar size, continuing the vertical row downwards.

Step 5: Outline the Body Tube and Neck

Draw a continuous line to outline the saxophone’s main body tube and the neck. This line runs vertically alongside the key mechanism, curves outward at the bottom, and bends into a wavy horizontal shape at the very top.

Step 6: Add the Mouthpiece

Attach a small, pointed wedge-shaped mouthpiece to the tip of the left-facing neck. Divide it internally with two small curved lines.

Step 7: Sketch the Bell Shape

Extend two upward-curving lines from the bottom right of the main body loop to form the basic outline of the saxophone’s bell flaring outwards.

Step 8: Complete the Bell Opening

Draw a large oval shape at the open end of the bell to define the rim and the inside depth of the saxophone’s opening.

Step 9: Color the Artwork

To complete the drawing, apply the final colors. The entire main body, neck, guard rod, and outer bell are colored a bright orange-yellow. The mouthpiece at the top is colored dark blue. All five circular key pads on the body are colored solid black. The inside of the bell opening is shaded with a warm, darker brown color to create depth.

5. Build Your Own Saxophone Drawing Easily

Step 1: Draw the Bell Rim

Start by sketching a large oval tilted slightly to the right. Inside this oval, add a smaller, concentric oval to create the open rim of the saxophone’s bell.

Step 2: Form the Upper Bell and Collar

Extend two curved lines downward from the bottom edge of the outer oval to form the upper body of the bell. Connect these two lines at the bottom with a narrow, curved, double-lined band or collar.

Step 3: Add the Bow (Bottom Curve)

Draw a large, U-shaped loop extending from the bottom of the previous collar. This creates the bottom curve (the bow) of the saxophone. Finish this section with another small, slanted collar at the opposite end of the curve.

Step 4: Draw the Straight Body Tube

Extend two long, straight, parallel lines upward and slightly angled to the right from the small collar. Close the top of this tube with a third rounded collar.

Step 5: Extend the Neck

Sketch two parallel, curved lines coming out from the top collar, bending smoothly to the right and downward to form the saxophone’s neck.

Step 6: Attach the Mouthpiece

Draw the mouthpiece assembly at the tip of the neck. Start with a small rectangle for the ligature and connect a tapered, bullet-shaped piece at the end for the mouthpiece itself.

Step 7: Place the Keys

Add four small circles evenly spaced along the main straight body tube of the saxophone to represent the keys.

Step 8: Apply the Final Colors

Color the finished drawing. Fill the main body, bell, bow, and neck with a vibrant golden yellow. Shade the inner opening of the bell and the connecting collars with a darker, brownish-yellow tone. Color the four keys in a light cream or beige shade. Finally, fill the mouthpiece assembly with dark grey and black tones to complete the illustration.