You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a seagull with simple steps.
Let’s get started!
Step 1: Drawing the Beak Profile
Begin with a small, curved crescent-like shape on the left, resembling an open profile for the lower half of the bird’s beak. Above this, add a slightly longer, more stylized crescent shape that forms the upper part of the beak, creating an open mouth profile.
Step 2: Starting the Neck and Head
From the top corner of the beak’s open end, extend a single, long, gently upward-curving line towards the right, forming the initial profile for the bird’s neck and head.
Step 3: Beginning the First Wing
Now, focus on the right side. Connect a new shape to the neck and head line to start the upper wing. This new shape has a large curved top edge and a series of smaller, curved scallop shapes along its lower edge, suggesting feathers.
Step 4: Adding the First Set of Flight Feathers
Refine the upper wing by adding details to its tip. Within the scalloped edge you just drew, create three overlapping, elongated, and pointed feather shapes extending outwards.
Step 5: Starting the Second Wing
Shift attention to the left. Just above where the neck line connects to the first wing, draw a second, slightly smaller wing. This wing has a similar shape to the first, featuring a curved upper edge and a lower edge defined by four prominent, scalloped feather shapes.
Step 6: Adding the Second Set of Flight Feathers
Complete the details for the left wing. Similar to Step 4, add three overlapping, pointed feather shapes that extend outwards from the existing structure.
Step 7: Shaping the Bird’s Body
Now, connect the lower edges of the beak and the left wing with a single, long, smooth, upward-curving line to form the bottom contour of the seagull’s body.
Step 8: Drawing the Tail
At the rear end of the body (the right side), add the tail. This consists of three separate, elongated, and rounded feather shapes that fan out slightly.
Step 9: Adding the Eye
Place a small circle on the head, located slightly above and to the right of the beak, to serve as the bird’s eye.
Step 10: Coloring the Seagull
For the final step, color in the seagull using a limited color palette. Color the upper section of both wings solid black. The body, head, and inner parts of the wings are white. Fill the beak with a bright, solid yellow. Finally, color the fanned tail feathers solid grey, and the eye black.
Step 1: Drawing the Beak
Start by drawing the bird’s beak. Create an upper section with a slight hook at the tip and a flatter lower section, keeping them slightly parted to give the seagull an open-mouthed look.
Step 2: Outlining the Head and Neck
From the top and bottom of the beak, extend lines to form the head and neck. Draw a large, rounded curve for the top of the head that transitions into a vertical neck line. Add a small curved line under the beak to indicate the throat.
Step 3: Adding the Wing and Primary Feathers
Draw a large, oval-like shape for the wing attached to the back of the neck. At the very back of this wing, add a smaller, pointed triangular shape to represent the tips of the primary feathers. Add two small internal lines within the main wing for detail.
Step 4: Forming the Breast and Underbody
Extend a long, smooth, “U” shaped curve starting from the throat, sweeping down to form a plump chest and belly, and connecting back toward the tail area.
Step 5: Completing the Tail
Add a small, rounded tab shape tucked underneath the primary feathers drawn in Step 3 to complete the bird’s tail.
Step 6: Drawing the Legs and Webbed Feet
Underneath the belly, draw two sets of vertical lines for the legs. At the base of each leg, add flat, wide feet with three scalloped toes to create a webbed appearance.
Step 7: Adding the Eye
Draw a large circle on the head for the eye. Inside this circle, add a smaller solid circle and a tiny dot to represent the pupil and a highlight, giving the bird a friendly expression.
Step 8: Applying Colors
Finalize the drawing by adding color. Use white for the head, neck, and underbody. Color the main wing light grey and the primary feather tips dark grey. The beak, legs, and webbed feet should be a vibrant orange. Finally, fill the pupil with black, leaving the small highlight white.
Step 1: Starting the Neck and Head Curve
In this initial step, draw a continuous curve that starts with a downward hook and then arches up to begin the shape of the seagull’s neck and head.
Step 2: Drawing the Wing and Body Foundation
Extend from where you left off, creating a smooth line that defines the back and top edge of the wing. Then, starting near the base of the neck, draw a larger, smooth loop that defines the front and bottom edge of the bird’s main body.
Step 3: Defining the Breast and Neck Base
Create a strong, curved line to form the breast of the bird, starting from the hook area and sweeping under and back to connect with the body shape. Then, connect the upper part of the first curve (head and neck) to the new breast line to fully form the neck.
Step 4: Shaping the Hooked Beak and Mouth
Draw the distinct shape of a large, hooked beak at the front of the head. Within the beak structure, add a smiling mouth line to give the bird its expression.
Step 5: Placement of the Small Eye
Above the mouth line and at the appropriate position on the head, draw a small, perfect circle with a smaller inner dot to form the seagull’s eye.
Step 6: Detailing the Chest Feature
Inside the main body contour, add a single, defined internal curve that runs parallel to the chest to give it a layered, feather-like appearance.
Step 7: Adding the Two Webbed Feet
Attach two long legs to the bottom of the body, each ending in a clearly defined, three-toed webbed foot.
Step 8: Designing Wing and Tail Feathers
Draw several curved, layered feather lines within the wing area to give it realistic detail. Then, extend a few longer feather shapes backward to complete the tail.
Step 9: Adding the Final Colors and Markings
To finish the drawing, apply realistic colors: color the main body, breast, and tail in white. Make the long beak and the webbed feet a vibrant orange. The main wing area should be light grey, with the layered feather details at the bottom of the wing colored in darker grey. The eye and any other outline details are kept in solid black.
Step 1: Drawing the Head Tuft
Start by drawing a small, crown-like shape at the top of the page. This consists of two curved peaks that meet in the middle, forming a simple tuft of feathers for the top of the seagull’s head.
Step 2: Outlining the Head and Neck
From the base of the tuft, extend two long lines downward. The line on the left should curve slightly inward to start the face, while the line on the right should drop down more vertically to form the back of the neck.
Step 3: Adding the Large Beak
Draw a large, elongated beak extending horizontally from the left side of the head. The top of the beak should have a slight downward hook at the end, and the base should have a curved line to indicate the mouth opening.
Step 4: Sketching the Main Wing
Below the neck, draw the main wing shape. Start with a rounded curve for the shoulder and extend it into a pointed tip. Add a wavy, scalloped line across the middle of the wing to represent the transition between different layers of feathers.
Step 5: Adding the Tail Feathers
From the bottom of the wing, extend a smaller, secondary feathered section pointing backwards. Use scalloped lines again to give the tail a layered, textured appearance.
Step 6: Completing the Body and Chest
Connect the base of the beak down to the tail with one large, sweeping “U” shaped curve. This line forms the seagull’s chest and belly, giving the bird its full body shape.
Step 7: Drawing the Webbed Feet
Underneath the belly, draw two thin, vertical legs. At the bottom of each leg, add a wide, triangular webbed foot with small points to represent the toes.
Step 8: Placing the Eyes
On the head, just above the beak, draw two small circles to represent the eyes. Inside each circle, add a smaller dot to create the pupils, giving the seagull a bright, alert expression.
Step 9: Applying Final Colors
To finish your drawing, color the seagull as follows:
– Body and Head: Leave these white.
– Beak and Feet: Color these a bright, solid yellow.
– Wing: Color the front section a light lavender or pale grey. Color the middle feathered section and the tips of the tail solid black.
– Eyes: Fill the pupils with solid black.
Step 1: Draw the Beak and Eye
Start by drawing the beak of the seagull. It should be sharp and slightly curved at the end. Just above and behind the beak, draw a small circular eye with a tiny dot in the center for the pupil.
Step 2: Form the Head
From the top of the beak, draw a smooth, rounded curve that moves upward and back to create the forehead and the top of the seagull’s head.
Step 3: Add the First Wing
Draw a large, expansive wing extending upward and to the left from the back of the head. Use a series of long, curved lines to represent the individual feathers along the bottom edge of the wing.
Step 4: Add the Second Wing
In the background, draw the second wing extending upward and slightly to the right. Like the first wing, use curved “scalloped” lines to define the feathers. This wing should appear slightly smaller to show perspective.
Step 5: Draw the Body
Connect the area under the beak to the base of the first wing by drawing a long, smooth curve that forms the seagull’s chest and belly.
Step 6: Add the Tail
At the very back of the body, draw the tail feathers. These should be short and fan out slightly, using three or four rounded segments.
Step 7: Draw the Legs
Underneath the belly, draw two thin legs with webbed feet. The legs should be tucked slightly backward as if the bird is soaring through the air.
Step 8: Apply Color
In the final step, bring your seagull to life with color. The main body and wings remain white, while the beak and the legs/feet are colored a bright yellow. To finish the look, color the tail feathers a dark grey to provide a nice contrast.
Step 1: Establish the Beak and Eye
Begin your drawing in the bottom right corner. Sketch the sharp, hooked beak of the seagull, complete with a nostril line. Just above the base of the beak, draw a simple circle with a central dot to form the seagull’s eye.
Step 2: Define the Head and Chin
Now, build the rest of the head. Draw a rounded curve from the top of the beak for the forehead, and another curved line below the beak to create the chin and lower throat.
Step 3: Draw the Left Wing
Next, add the prominent left wing, which will be the primary one in view. This wing should extend upwards and to the left with a large, sweeping structure. Use multiple rounded, scalloped strokes along the top edge to clearly define the layers of flight feathers.
Step 4: Draw the Right Wing
Moving to the background, draw the seagull’s second wing. It should rise upwards from the back of the head. Following the same style as the first wing, use curved lines to detail the secondary feathers, showing this wing from a more foreshortened perspective.
Step 5: Outline the Main Body
To structure the bird, connect the throat to the left wing with a smooth, continuous line. This forms the seagull’s neck and powerful chest, defining the body.
Step 6: Draw the Tucked Legs
Just below the chest area, add the seagull’s two legs. They should be tucked back against the body for flight, with simple lines defining the legs and the beginning of the webbed feet.
Step 7: Add the Tail Feathers
At the rear of the body, draw the tail feathers. These should fan out slightly and be rendered with a series of rounded, overlapping segments to show the layered feathers.
Step 8: Apply Final Colors
In the final step, color your seagull. Keep the head, body, and the core of the wings white. Color the beak and the legs/feet a vibrant orange. To complete the look, shade the edges of both wings (the flight feathers) and the entire tail a deep charcoal-grey.
Hopefully, this drawing tutorial on Seagull will help you easily create a nice drawing.
