You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a shield with simple steps.
Let’s get started!
Step 1: The Top Edge
Start by drawing the top of the shield. Create two symmetrical, slightly curved lines that meet at a sharp point in the center, resembling a wide “M” or a shallow bird wing.
Step 2: The Main Body
From the outer corners of your top line, draw two long curves that sweep downward and meet at a sharp point at the bottom. This completes the classic “heater shield” silhouette.
Step 3: Beginning the Inner Rim
Now, start creating the border. Draw a curved line inside the top section, following the same shape as the very first line you drew. This will be the top of the metal frame.
Step 4: Completing the Frame
Continue the inner lines down the sides to mirror the outer shape. You should now have a consistent border (the rim) running all the way around the inside of the shield.
Step 5: Adding the Wood Planks
Inside the inner section of the shield, draw a series of parallel horizontal lines. These lines represent the individual wooden planks that make up the shield’s body.
Step 6: Adding the Rivets
To give the shield a reinforced look, draw small circles at regular intervals along the metal rim. These represent the rivets or bolts that hold the shield together.
Step 7: Color and Finishing
Finally, add color to bring it to life! Use a brown shade for the wooden planks in the center and a grey or silver tone for the metal rim and the rivets.
Step 1: Start by drawing the top edge of the shield. Create two symmetrical, curved lines that slope upwards to meet at a central point, resembling a wide, shallow “V” shape with a curved bottom.
Step 2: From the two ends of the top line, draw two long, curved lines downwards. These lines should sweep inwards and meet at a single point at the bottom, forming the classic pointed base of the shield.
Step 3: Now, draw a second, smaller line inside the top section of the shield. This line should be parallel to the outer top edge, creating a border at the top.
Step 4: Continue drawing the inner line down the sides of the shield, keeping it parallel to the outer edge. This creates a consistent frame around the main body of the shield.
Step 5: Add small circles along the inner frame you just drew. Place them at the top corners, along the sides, and near the bottom point. These will represent the rivets or bolts of the shield.
Step 6: Inside the main body of the shield, draw a large cross. Start with a vertical rectangle in the center, then add a horizontal rectangle across it.
Step 7: Finally, color your drawing. The outer border and rivets can be colored grey to look like metal. The main body of the shield is typically red, and the cross is left white.
Step 1: The Base Outline
Start by drawing a large, perfect circle in the center of your page. This serves as the outer boundary of the shield.
Step 2: The Outer Rim
Draw a second circle slightly larger than the first one to create a thick outer rim or border. This represents the metal or leather binding around the edge of the wood.
Step 3: The Shield Boss (Center)
Find the exact center of your shield and draw a small circle. This is the beginning of the “boss,” the metal piece that protects the hand.
Step 4: Completing the Boss
Add another circle around the small center one to give the boss some depth and a mounting frame.
Step 5: The Vertical and Horizontal Frames
Draw two sets of parallel lines: one pair running vertically and one pair running horizontally. These should start from the center boss and extend to the inner edge of the rim, forming a cross shape.
Step 6: Adding Detail Lines
Inside the cross you just created, draw thin secondary lines parallel to the existing ones. This adds a decorative “inlay” or reinforcement look to the wooden planks of the shield.
Step 7: Coloring and Shading
Finally, apply color to bring the shield to life:
– Red: Fill in the four quadrants of the shield face.
– Gold/Yellow: Color the cross-shaped frame.
– Grey/Silver: Use metallic tones for the outer rim and the center boss.
– Off-white: Fill in the thin detail lines for contrast.
Step 1: Draw the Top Edge
Start by drawing a wide, slightly curved “M” shape or a shallow chevron. This forms the top crest of the shield. Ensure the center point is higher than the two ends.
Step 2: Form the Shield Outline
From the two outer endpoints of the top edge, draw two long, symmetrical curves that sweep downward and meet at a sharp point at the bottom. This creates the classic heater shield silhouette.
Step 3: Add the Inner Upper Border
Inside the shield, draw a curved line that follows the shape of the top edge. This line should be slightly lower, creating the beginning of an inset border.
Step 4: Complete the Inner Frame
Continue the inner line downward, paralleling the outer edges of the shield. This creates a thick frame or trim around the entire perimeter.
Step 5: Add the Rivets
Draw small circles along the border of the shield. Place one at each corner and others evenly spaced along the sides. These represent the rivets or bolts holding the shield together.
Step 6: Mark the Center
Draw a small circle exactly in the center of the shield. This will serve as the hub or “boss” for the decorative cross.
Step 7: Draw the Vertical Cross Arms
From the center circle, draw two flared shapes extending toward the top and bottom. The ends should be notched (V-shaped), resembling a Cross Pattée or a Maltese cross style.
Step 8: Draw the Horizontal Cross Arms
Repeat the process from Step 7, but extend the arms to the left and right. Ensure they are symmetrical with the vertical arms to complete the four-pointed decorative cross.
Step 9: Color and Detail
Finalize the drawing by adding color. Fill the main body of the shield with gray (metallic). Color the border, rivets, and the central cross with yellow/gold. Ensure all outlines are bold and clean.
Step 1: The Top Edge
Begin by drawing a wide, shallow “V” or chevron shape with slightly curved arms to form the top crest of the shield.
Step 2: The Main Outline
From the outer tips of the top edge, draw two long, symmetrical curves that sweep downward and meet at a sharp point at the bottom to create the shield’s silhouette.
Step 3: Upper Inset Border
Inside the top of the shield, draw a smaller version of the top edge to begin creating an inner border or frame.
Step 4: Completing the Inner Frame
Extend the lines from Step 3 downward, following the outer curves of the shield, to form a complete internal border.
Step 5: The Vertical Division
Draw a single straight line from the top center point of the inner frame down to the bottom point, dividing the center of the shield into two halves.
Step 6: Top Rivets
Place several small circles along the top section of the outer border to represent metal rivets or bolts.
Step 7: Side and Bottom Rivets
Continue adding small circles evenly spaced around the remaining sides and the bottom point of the shield’s border.
Step 8: Final Colors
Apply the final colors to your drawing: use brown for the border, gray for the rivets, and a split red and blue design for the two central halves.
Step 1: The Top Edge
Draw a wide, horizontal “M” shape or a double-arched line. This will form the upper rim of the shield, featuring a slight point in the center and two curved “horns” on the sides.
Step 2: The Side Curves
From the outer ends of the top edge, draw two inwardly curved lines (concave) that move downward. This gives the shield its stylish, narrowed “waist.”
Step 3: The Bottom Point
Connect the two side lines at the bottom by drawing two long, sweeping curves that meet at a sharp point in the center. This completes the basic silhouette of the shield.
Step 4: The Inner Top Rim
Start creating the border by drawing a smaller version of the top “M” shape just inside the first one. This defines the thickness of the upper frame.
Step 5: The Inner Side Borders
Draw two curved lines parallel to the side edges. These should be spaced evenly from the outer lines to maintain a consistent border width.
Step 6: Closing the Inner Border
Complete the inner frame by drawing the two bottom curves parallel to the outer base. You now have a hollow frame around the entire shield.
Step 7: Adding the Rivets
Draw small, evenly spaced circles all the way around the center of the border. These represent the metal rivets or bolts that hold the shield together.
Step 8: The Wooden Planks
Inside the main body of the shield, draw three vertical lines. Place one exactly in the center and two on the sides to create the appearance of vertical wooden planks.
Step 9: Final Coloring
Apply the finishing touches by adding color. Use gold or yellow for the outer metal frame, grey for the rivets to give them a steel look, and a muted brown or tan for the wooden planks inside.
Hopefully, this drawing tutorial on Shield will help you easily create a nice drawing.
