Shovel Drawing

1. Easy Steps to Draw a Basic Pointed Shovel

Today, drawing123.com will guide you how to easily draw a shovel with simple steps.

Let’s get started!

Step 1: Draw the Handle Grip

Start by drawing a “U” shaped curve tilted at an angle. This will form the outer frame of the shovel’s handle grip.

Step 2: Add the Crossbar

Connect the open ends of the “U” shape with two straight parallel lines to create a crossbar. This completes the “D-shape” of the handle where you would hold the shovel.

Step 3: Draw the Long Shaft

Extend two long, straight, parallel lines from the bottom center of the handle. This forms the shaft (the long wooden or metal neck) of the shovel.

Step 4: Add the Socket

At the bottom end of the shaft, draw a pointed, bullet-like shape. This is the socket, which is the part of the metal head that connects to the handle.

Step 5: Outline the Blade

Draw the main blade (or scoop) of the shovel around the socket. It should have a flat top with two corners and curve down into a rounded point at the bottom, resembling a wide shield.

Step 6: Color Your Drawing

Finally, add color to bring it to life. Use grey for the metal parts (the blade, socket, and handle frame) and brown for the wooden parts (the shaft and the grip bar).

2. Drawing a Shovel with Easy Lines and Shapes

Step 1: Draw the Top of the Handle

Start by drawing a trapezoid-like shape with slightly curved sides. This will be the outer frame of the handle grip.

Step 2: Add the Handle Base

At the bottom of the shape you just drew, add a small rectangular base with rounded corners. This is where the handle will connect to the shaft.

Step 3: Create the Hand Hole

Inside the first shape, draw a smaller triangle-like shape with rounded corners. This creates the hole where you would place your hand to grip the shovel.

Step 4: Draw the Long Shaft

Extend a long, slender cylinder from the base of the handle. Draw two parallel lines and close them with a slight curve at the bottom.

Step 5: Add the Pointed Socket

Draw a long, sharp triangular point extending from the end of the shaft. This represents the metal neck that reinforces the blade.

Step 6: Outline the Blade

Draw the shovel blade around the pointed socket. The top should have two inward-curving shoulders, and the bottom should taper into a rounded point, much like a shield.

Step 7: Color Your Drawing

Finish by adding color. In this version, use orange for the metal head and handle grip, and a natural wood brown for the long shaft.

3. Create a Clean and Simple Shovel Sketch

Step 1: The Inner Handle

Start by drawing a “D” shape tilted at a 45-degree angle. This represents the inner opening of the shovel’s handle.

Step 2: The Outer Handle

Outline the first shape with a larger, thicker border. Ensure the corners are slightly rounded to give the handle a comfortable, ergonomic look. Leave a small gap at the bottom center of this outer shape.

Step 3: The Handle Base

From the gap you left in Step 2, draw a small rectangular socket extending downward. This is where the handle connects to the shaft.

Step 4: The Upper Shaft

Extend a long, thin rectangle from the base of the handle. This forms the first section of the shovel’s long wooden or metal shaft.

Step 5: The Lower Shaft and Tip

Continue the shaft further down. At the very end, add a pointed, bullet-shaped tip. This part will eventually overlap with the shovel blade.

Step 6: The Shovel Blade

Draw a large pentagon-like shape (a square with a pointed bottom) around the bullet-shaped tip. The tip of the shaft should look like it is “pinning” the blade in place.

Step 7: Coloring and Finishing

Add color to your drawing to distinguish the different materials:

– Green: For the plastic or rubber grip handle.

– Brown: For the wooden shaft.

– Light Grey: For the metal blade and the connecting socket.

4. A Beginner’s Guide to Drawing a Garden Shovel

Step 1: The Handle Grip

Start by drawing a horizontal “D” shape with rounded corners. This represents the inner opening where the hand holds the shovel.

Step 2: The Handle Frame

Draw a larger teardrop-like shape around the first “D” to create the outer frame of the handle. Taper the bottom of this shape into a small neck.

Step 3: The Upper Shaft

Extend a long, thin vertical rectangle downward from the neck of the handle. This forms the first section of the shovel’s long shaft.

Step 4: The Lower Shaft and Core

Continue the shaft further down with a second, slightly narrower section. End it with a smooth, rounded tip that will serve as the central support for the blade.

Step 5: The Top of the Blade

Draw two curved “shoulders” extending outward from the middle of the lower shaft. These curves should look like a flattened “M” or wings, forming the top edge of the shovel blade.

Step 6: The Ground Line

Add a straight ground line underneath the shovel to give it perspective.

Step 7: Coloring and Final Details

Finish your drawing by adding colors to define the different parts:

– Yellow: For the plastic handle grip.

– Brown: For the wooden shaft.

– Grey: For the metal blade and the lower core.

5. Draw a Classic Garden Shovel in 5 Steps

Step 1: Draw a simple teardrop shape tilted to the side for the top of the handle.

Step 2: Add a thick border around the teardrop and extend a wide rectangular shaft downward from it.

Step 3: Lengthen the shaft and end it with a smooth, pointed tip.

Step 4: Draw the blade as a large, slightly rounded square that fits around the pointed tip of the shaft.

Step 5: Color the handle and shaft a golden-brown and the blade a dark charcoal grey.

6. How to Draw a Shovel in a Pile of Dirt

Step 1: Draw an irregular, bumpy mound with a flat bottom to represent a pile of dirt.

Step 2: Draw a central vertical piece sticking out of the dirt, which will be the base of the shovel blade.

Step 3: Add two wing-like curves on either side of the center piece to complete the visible part of the buried blade.

Step 4: Extend a long, rectangular shaft upwards from the center of the blade.

Step 5: Draw a large, flared “D” shape at the top of the shaft for the handle.

Step 6: Add a smaller triangular cutout inside the handle to create the handhold.

Step 7: Color the dirt and the shaft brown, while coloring the metal blade and handle a teal or blue-green shade.

Hopefully, this drawing tutorial on Shovel will help you easily create a nice drawing.