You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a stethoscope with simple steps.
Let’s get started!
Step 1: The Binaural Spring
Start by drawing a wide, curved “U” shape with a small “Y” shaped connector at the bottom center. This serves as the frame that holds the ear tubes together.
Step 2: The Binaural Tubes
Extend two sets of parallel curved lines upward from each end of the base frame. These lines should curve slightly inward toward each other as they reach the top.
Step 3: The Earpieces
At the tip of each upper tube, draw a small, rounded bulb. These shapes should look like soft cushions that would fit comfortably inside the ears.
Step 4: The Flexible Tubing
Starting from the bottom of the “Y” connector, draw a long, winding “S” shape. Use two parallel lines to give the tubing some thickness as it snakes down the page.
Step 5: The Connector Stem
At the very end of the long flexible tube, add a small, short rectangular piece. This acts as the bridge between the tubing and the chest piece.
Step 6: The Chest Piece
Attach a large circle to the connector stem. Inside this circle, draw two smaller concentric circles to represent the diaphragm and the internal components used to pick up sound.
Step 7: Final Details and Coloring
To finish your drawing, apply colors to distinguish the different materials. Use a vibrant blue for the main flexible tubing and the lower connector. Apply a metallic silver or light gray to the upper ear tubes and the circular chest piece. Finally, color the earpieces a bright red to make them stand out.
Step 1: Defining the Ear Tips
At the top center of your drawing area, begin by sketching two small, identical oval shapes. They should be standing vertically but angled slightly toward each other at the top. This creates the cushion covers for the earpieces.
Step 2: Establishing the Main Framework
Directly beneath the two oval tips from Step 1, draw a wide, large, curved “U” shape. The top ends of this large curve should align with and start just below the bases of the oval ear tips. This defines the first outline of the rigid metal frame.
Step 3: Adding Thickness to the Frame
To make the frame look solid, draw a second curved line parallel to and just inside the first “U” shape, following its entire course. Additionally, add curved lines inside the original oval tips from Step 1 to complete the earpiece structure. The stethoscope now has a defined thickness.
Step 4: Connecting the Bottom Yoke
Focus on the bottom curve of the framework. Add two parallel curved lines across the width between the main parallel frame lines, joining them together. This establishes the junction point, or yoke, at the bottom of the ear tubes.
Step 5: Extrapolating the Flexible Tubing
Starting from the center of the yoke created in Step 4, extend a long, winding, “S” shaped double line downward and off to the right. Use two lines to keep the thickness consistent with the upper frame. This forms the flexible rubber or plastic tubing.
Step 6: Positioning the Chest Piece Base
At the final termination point of the long flexible tubing, draw a single, simple, moderately sized circle. This circle marks the base location and outer rim for the chest piece.
Step 7: Detailing the Chest Piece Inner Rings
Inside the circle established in Step 6, carefully draw nested concentric circles. This adds the necessary details, defining the bell and the diaphragm assembly of the stethoscope’s chest piece. The drawing phase is now complete.
Step 8: Applying Final Color
Color all the flexible tubing, starting from the connection below the earpieces and following the long “S” curve down to the chest piece connection, in vibrant red. Color the two earpiece tips and the multi-ring concentric circular chest piece in solid medium gray.
Step 1: Laying the Foundation – Earbuds
Begin by drawing two small, roughly circular shapes at the very top of your drawing space, with a small distance between them. This establishes the initial earbuds of the stethoscope. These will be our reference points.
Step 2: Connecting the Tubes – The Binaural Top
Next, attach two parallel, downward-curving line segments to the bottom of each earbud shape from Step 1. These curved lines extend only a short way down, forming the initial tubes.
Step 3: Completing the Ear Tubes – The Full Curved Structure
Continue the lines from Step 2. Lengthen these two curved lines significantly. Sweep them downwards and inward towards each other, creating two large, prominent, smooth curves that frame the lower part of the stethoscope. Draw parallel lines to make them look like complete tubes, but leave a small gap between their ends.
Step 4: Creating the Y-Connector – The Junction Point
Between the bottom ends of the long curved ear tubes from Step 3, draw a small, simplified Y-shaped bracket or cup. This connector connects the ends of the large curves and forms a single base pointing downwards.
Step 5: Extending the Main Tubing – The Single Lower Line
From the single downward-pointing bottom of the Y-connector from Step 4, draw a single, long, continuous line that forms a large, serpentine ‘S’ shape winding downwards through the remaining empty space. This creates the main length of the stethoscope tubing.
Step 6: Drawing the Final Component – The Bell/Diaphragm
At the very bottom end of the serpentine tube from Step 5, attach a larger, prominent circular shape. Draw two concentric circles to form the outer rim and the central diaphragm of the chest piece. This is the part that will be placed on the patient.
Step 7: Adding the Final Detail – The Heart Icon
Within the smaller inner circle of the chest piece (from Step 6), draw a small, classic stylized heart shape, centrally located, as a symbolic finishing touch. The entire structure is now complete.
Step 8: Final Colors – Green and Grey
Now, apply the final colors to the entire drawing. The ear tubes and the chest piece should be colored a cool grey. The earbud covers, the Y-connector, and the long serpentine main tube are all colored a vibrant green. Finally, the heart icon inside the chest piece is filled with bright red, matching the heart itself.
Step 1: Drawing the Chest Piece Base
Start at the bottom of your page by drawing two concentric circles. This creates the main structure of the chest piece, which is the part used to listen to a heartbeat.
Step 2: Adding a Friendly Face
Inside the smaller inner circle, draw two tiny solid circles for eyes and a small curved line underneath them for a smile. This gives your stethoscope a cute, personified character.
Step 3: Forming the Tubing Loop
From the top of the chest piece, draw a double-lined tube that curves upward and then loops around to the left before heading back toward the center. This creates a playful “curly” effect in the flexible tubing.
Step 4: Extending the Main Tube
Continue the double lines from the loop upward. This segment should be a relatively straight vertical path that will eventually connect to the upper frame.
Step 5: Creating the Y-Connector
At the top of the vertical tube, draw a wide, U-shaped bracket with a small base. This is the junction that splits the single tube into two separate earpieces.
Step 6: Drawing the Metallic Binaurals
From the ends of the U-shaped bracket, extend two long, curved double lines that sweep outward and then hook back inward at the top. These represent the rigid metal tubes of the stethoscope.
Step 7: Adding the Earbuds
At the very tips of the curved tubes from the previous step, draw two small, rounded bean-like shapes. These are the earbuds that fit into the ears.
Step 8: Applying the Final Colors
Now, fill in your drawing with color. Use grey for the metallic binaural tubes and the entire chest piece (including the face). Use a bright yellow for the earbuds, the U-shaped connector, and the long, looped flexible tubing. Finally, ensure the eyes and mouth are solid black to make the face stand out.
Step 1: Establishing the Core Arc
Start the drawing by creating a basic curve. This foundational shape will define the width and central structure of the entire stethoscope frame. All subsequent elements will build outward from this initial curve.
Step 2: Defining the Upper Frame and Connectors
Extend the existing line upward and outward, forming the rigid metallic ear tubes. Add small details where the tubes meet the curve to define the joints or connectors, giving the frame more structure.
Step 3: Creating the Ear Hooks and Tips
Draw the upper section of the ear hooks, which curl around towards each other. At the very top, add soft, rounded tips. This defines the final shape of the upper headset that goes into the ears.
Step 4: Drawing the Base for the Chest Piece
Shift your focus to the bottom of the structure. Draw a prominent, V-shaped structure, carefully positioned to link the upper metallic frame (established in step 2) to where the flexible tubing will attach.
Step 5: Adding the Flexible, Curved Tubing
From the V-shaped structure created in the previous step, draw a long, curving line that loops forward. This adds depth and defines the path of the flexible acoustic tube.
Step 6: Detailing the Connection Point
Focus on the end of the flexible tubing. Add a detailed, multi-layered fitting at its tip. This crucial element defines the interface where the main acoustic tube will connect to the chest piece.
Step 7: Positioning the Diaphragm and Bell Housing
Draw a series of concentric circles and rounded shapes below the connecting fitting to establish the body of the chest piece. This structure, positioned as if seen in a slightly isometric view, houses the diaphragm and bell.
Step 8: Constructing the Wide Base and Structure
Below the established chest piece body, add more rings to define the full structure. Introduce a wider, larger concentric ring at the very bottom, creating a broad, stable base for the diaphragm assembly.
Step 9: Finalizing with Complete Color
Now, you can add color to the entire drawing to bring the object to life. The flexible tubing, eartips, and part of the V-joint should be filled with a vibrant orange. The upper metallic headset and the central connecting stem on the chest piece are a distinct dark gray. The main body and wide base of the chest piece, along with the ear tube joints, are a sleek silver.
Step 1: Drawing the Y-Joint
Start by drawing a small “V” or “Y” shape with rounded ends and thick outlines. This represents the central acoustic valve where the headset meets the main tubing.
Step 2: Adding the Main Tubing
From the bottom of the Y-joint, extend two parallel lines downward. Curve them smoothly to the left and then back up to the right, forming a large “U” or hook shape. This creates the flexible acoustic tube.
Step 3: Creating the Connector Piece
At the open end of the tube you just drew, add a small, vertical rectangular shape with rounded corners. This serves as the connector between the tubing and the chest piece.
Step 4: Constructing the Chest Piece
Draw a series of concentric circles starting from the connector piece. Create a large outer circle, a medium middle circle, and a smaller inner circle to represent the diaphragm and the bell housing.
Step 5: Adding the Headset Support
Go back to the top of the initial Y-joint. Draw a wide, upward-curving arc that connects the two top points. This represents the tension spring or support bar of the headset.
Step 6: Extending the Ear Tubes
Draw two long, slightly curved parallel lines extending upward from the ends of the headset support. These should angle outward slightly to form the metallic binaural tubes.
Step 7: Adding the Eartips
At the very top of each binaural tube, draw a small, rounded oval or bulb-like shape. These are the earpieces that fit into the user’s ears.
Step 8: Applying Final Colors
Finish the drawing by applying a vibrant color palette. Use a bright pink for the Y-joint and the long, flexible tubing. Apply a light blue to the headset support bar, the upper ear tubes, and the outer ring of the chest piece. Use a lime green for the eartips and the very center of the chest piece. Finally, color the connector and the middle ring of the chest piece in shades of gray and white.
Hopefully, this drawing tutorial on Stethoscope will help you easily create a nice drawing.
