You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a stingray with simple steps.
Let’s get started!
Step 1: Draw the Body Core and Tail
Begin by drawing a long, slender shape that looks like a curved teardrop or a spoon. The top part should be wider and open, while the bottom narrows into a long, elegant tail that curves slightly to the side.
Step 2: Add the Pelvic Fins
Near the base of the tail, add two small, rounded “U” shapes on either side. These represent the pelvic fins located at the rear of the stingray’s body.
Step 3: Start the Right Wing
From the top right side of the main body, draw a large, sweeping curve that moves outward and then back down toward the pelvic fin. This creates the broad, flowing wing typical of a ray.
Step 4: Complete the Left Wing
Repeat the process on the left side to balance the drawing. Draw a wide, angular curve that extends outward and connects back toward the left pelvic fin, completing the diamond-like silhouette.
Step 5: Add Texture Lines
Draw three short, parallel diagonal lines on each wing. These small details add a bit of character and texture to the flat surface of the stingray’s body.
Step 6: Create the Face
Give your stingray a personality by drawing two large, round eyes near the top center of the head. Inside each eye, add two smaller circles to indicate highlights. Finally, draw a tiny, cheerful curved line between the eyes for a smile.
Step 7: Apply the Colors
For the final touch, fill in the entire body and tail with a soft, light blue color. Color the pupils of the eyes solid black, leaving the small inner circles white for a “sparkle” effect. Add two small pink oval spots just below the eyes to give the stingray cute, blushing cheeks.
Step 1: Establish the Main Body and Right Wing
Start by drawing a leaf-like, curved teardrop shape to form the central body of the ray. From the point, extend a large, smooth curve outward to create the right pectoral fin, which should look slightly smaller due to perspective.
Step 2: Form the Large Left Wing
From the left side of the central body, draw a very large, sweeping curve that creates the left pectoral fin. This fin should be much larger and wider, emphasizing the foreshortened front view.
Step 3: Add the Upper Dorsal Fin
On the upper back of the left fin, draw a small, smooth fin shape. This dorsal fin adds detail and highlights the ray’s anatomy.
Step 4: Draw the Curved Tail
Extend a long, thin, curved tail from the point where the main body meets the right fin. The tail should sweep elegantly upwards and back.
Step 5: Placement of the Eyes
On the lower front of the main body, draw two sets of nested circles (a large circle with a smaller one inside) to mark the position for the eyes.
Step 6: Add Spots and Cheeks
Add small, irregular ovals over the ray’s main body to represent the characteristic spots. Then, add a tiny circle on each side, just outside the eyes, for the cheek blushes.
Step 7: Apply the Final Colors
For the final step, color the stingray. Fill the entire body and tail with a deep purple color. Make the spots a darker, muted purple or slate gray. Color the inner eye circles solid black and the cheek blushes bright red. All lines should be finished in clean, dark outlines.
Step 1: Start with the Right Fin
First, draw a rounded triangular shape for the stingray’s right fin, tapering to a point at the bottom left.
Step 2: Add the Left Fin and Body Outline
Add a large curved line that forms the left fin and the main body of the stingray, connecting to the pointed end of the right fin. A smaller curve at the top right completes the outline of the head.
Step 3: Define the Main Body Curve
Inside the outline, draw a smooth arc from the head area down to the pointed edge. This curve defines the plump, central part of the stingray’s body.
Step 4: Draw the Wavy Tail
Add a single, continuous, and wavy line extending upwards from the center of the body to form a long, curving tail.
Step 5: Detail with Spots
Draw several circular and oval spots of various sizes on the stingray’s back and along the tail to add detail.
Step 6: Add a Friendly Face
Draw two simple, long ovals for the eyes, and a simple curve below them for a smiling mouth, giving the stingray its character.
Step 7: Finalize with Color
In the final step, color the main body and the top fin a light blue. Use a darker shade of blue for the right fin (belly) and all the spots on the body and tail. Then, fill in the eyes with a darker color.
Step 1: Lay Down Foundation Curves
Start the drawing by sketching two small, initial curves. One curve, on the left, dips down and then back up, creating a gentle ‘s’ or wave shape. The second curve, on the right, is a simple, smaller upward-curving arc. These curves will begin to define the top edge of the stingray.
Step 2: Define the Top Crest
Next, draw a longer, prominent upward curve that spans across and connects the two curves from the previous step. This single arch forms the main upper outline of the stingray’s head and body, while the curves from Step 1 are left underneath, beginning to create the brow ridges.
Step 3: Sketch the Broad Winged Body and Head
Draw a massive, deep U-shaped curve. This curve should connect from the top crest drawn in Step 2, extend downward far and wide on both sides to form the enormous, wing-like pectoral fins, and then curve back inward to meet itself near the center top. Leave the pointed outer edges of this U-shape open. At the top right, add a simple downward curve to complete the shape of the head.
Step 4: Form the Secondary Fin Structure
Building from the end points of the main U-shaped body curve, create the second side of each wing. Draw a curve for the left wing and another for the right wing that each start from their respective outer points, curve inward, and meet at a single central point at the bottom, completing the wide-bodied shape of the fish.
Step 5: Attach the Flowing Tail
Add a single, smooth, flowing curve extending from the top right edge of the stingray, right from the end of the head curve, to create a long, tapered, and upward-swirling tail.
Step 6: Pattern with Spots
Now, give the stingray its distinct pattern. Draw several circular and oval-shaped spots of various sizes along the outer edge of the body and on the right wing.
Step 7: Detail the Face and Eyes
Inside the head area, draw two concentric oval-like structures. Each has a larger outer circle and a smaller inner circle, defining the eyes. A small dot or circle in the center of the inner circle completes the pupil, bringing the face to life.
Step 8: Finalize with Full Color
The top side of the stingray, including the head, body, and tail, is colored a vibrant orange. The underside (the bottom section of the body and the edge of the other wing) is colored a bright yellow. For the patterns, fill in all the spots on the body and tail with a deep brown. Finally, use a dark color like dark blue or black to fill in the pupils and eyebrows, giving the stingray its full, finished expression.
Step 1: Draw the Main Body Outline
Start by drawing a large, tilted oval shape. The left side should be wider and more rounded, while the right side tapers slightly. Leave a small gap on the upper right side of the oval.
Step 2: Add the Head and Rear Bumps
In the gap you left, draw two small, rounded hills. The first one sits on the top edge of the body, and the second one sits near the back corner. These represent the top of the head and the base of the tail.
Step 3: Create the Long Tail
From the space between the two bumps you just drew, extend two long, wavy lines that meet at a sharp point. This creates a thin, flowing tail that curves upward and to the right.
Step 4: Sketch the Left Wing
On the top left side of the body, draw a large, curved triangular shape. It should start from the middle of the back and curve down to meet the front of the body, making the stingray look like it is flapping its wing.
Step 5: Add the Bottom Fin
Draw a long, thin, bean-like shape along the bottom right edge of the body. This creates the underside of the right wing, giving the drawing a 3D perspective.
Step 6: Draw the Decorative Spots
Inside the main area of the body, draw five or six small ovals. Scatter them across the center to give the stingray a patterned skin.
Step 7: Add the Eyes and Smile
Near the front of the head, draw two large circles for the eyes. Inside each eye, draw a curved line to separate the pupil. Just below the front eye, add a tiny curved line for a simple, happy smile.
Step 8: Color the Illustration
For the final touch, color the stingray’s main body, wings, and tail with a bright yellow. Use a light blue for the decorative spots on its back. Finally, color the pupils black, leaving a small white circle in each eye to make them look shiny and bright.
Hopefully, this drawing tutorial on Stingray will help you easily create a cute drawing.
