You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw sunglasses with simple steps.
Let’s get started!
Step 1: Draw the Top Frame
Start by drawing a wavy horizontal line that dips slightly in the center. This will form the top edge of the sunglasses frame and the bridge of the nose.
Step 2: Complete the Outer Frame
Extend the lines downward from the edges of the top line to create two large, rounded shapes for the lenses. Connect them at the bottom to complete the outer silhouette of the frame.
Step 3: Add the Inner Lens Outlines
Inside the main frame, draw two smaller “rounded square” shapes. These lines represent the inner rim where the lenses sit.
Step 4: Add Lens Reflections
To make the lenses look like glass, draw two short, parallel diagonal lines inside each lens. This adds a “glint” or reflection effect.
Step 5: Draw the Left Temple (Arm)
From the top-left corner of the frame, draw the first temple arm extending upwards and back. Make sure to curve the end downward to represent the part that sits behind the ear.
Step 6: Draw the Right Temple (Arm)
Repeat the previous step on the right side. Draw the second arm peeking out from behind the top-right frame, following the same angle and curve as the first one.
Step 7: Color Your Drawing
Finally, fill in your drawing with color. In this example, the frames and arms are a coral/peach color, and the lenses are a solid blue.
Step 1: The Top Frame Line
Start by drawing a long, wavy horizontal line. This line should have two gentle humps (like a very shallow “M” or waves) to represent the top edge of the sunglasses frame.
Step 2: The Side Hinges
At both ends of the wavy line, draw short angled lines pointing downwards and slightly outwards, then tucking back in. This creates the “corners” or hinges where the arms will eventually attach.
Step 3: The Bottom Outline and Bridge
Draw the lower part of the frame. Start from the side hinges and curve downwards to form the bottom of the lenses. In the center, create a small, upside-down “U” shape to form the bridge that sits on the nose.
Step 4: The Inner Lens Borders
Inside the large outline you just created, draw two rounded quadrilateral shapes. These lines define the actual inner border of the frames where the glass lenses are held.
Step 5: Lens Reflections
To give the sunglasses a realistic look, draw three diagonal parallel lines across each lens. These represent light reflections or “glare” on the glass surface.
Step 6: The Temples (Arms)
Draw the temples (the arms that go over the ears). Draw two thick, angled shapes extending from the top corners of the frame, curving slightly at the ends to show where they hook behind the ears.
Step 7: Coloring
Finally, fill in your drawing with color. Use a vibrant blue for the frames and a darker blue or charcoal grey for the lenses. Make sure to keep the reflection lines a lighter shade to make them stand out.
Step 1: Draw the Top Frame Line
Start by drawing a long, horizontal wavy line that dips in the center and curves downward at both ends to create the initial shape of the brow bar.
Step 2: Define the Lens Outlines
Beneath the brow bar, draw two large, rounded shapes that are wider at the top than at the bottom to represent the outer border of the lenses.
Step 3: Add the Hinge Details
Draw two small circles, one at each top outer corner of the frame, to represent the decorative rivets or hinges.
Step 4: Refine the Top Edge
Add a thin, curved line just above the original brow bar to give the top of the frame more thickness and dimension.
Step 5: Sketch the Earpieces (Temples)
Draw two thick, angled shapes extending upward and outward from the corners of the frame, curving them at the ends to show the parts that go over the ears.
Step 6: Add Depth to the Earpieces
Draw a second line along the top of each temple to give the arms of the sunglasses a three-dimensional, solid look.
Step 7: Color the Final Drawing
Fill in the frame and earpieces with a vibrant color like yellow, and shade the lenses with a light blue to complete the illustration.
Step 1: The Top Rim
Start by drawing a long, horizontal line that curves slightly downward in the middle to create the bridge and upward toward the ends. This forms the top edge of the sunglasses frame.
Step 2: The End Pieces
Add two short, downward-curving strokes at both ends of the top line. These will serve as the outer corners where the frame connects to the temples (arms).
Step 3: The Bottom Frame
Draw the lower part of the frame. Create two large, rounded “U” shapes for the lens areas, connecting them in the center to form the nose bridge.
Step 4: Decorative Rivets
Draw two small ovals on the far left and right sides of the frame. These represent the metal rivets or studs often found on classic wayfarer-style sunglasses.
Step 5: Lens Outlines
Inside the main frame, draw two smaller rounded squares. These lines define the actual edges of the lenses and give the frame its thickness.
Step 6: The First Temple (Arm)
Draw the first temple arm visible through the right lens. It should start near the hinge and curve slightly downward as it extends toward the middle.
Step 7: The Second Temple (Arm)
Add the second temple arm visible through the left lens. Similar to the previous step, draw a curved shape extending from the hinge toward the center.
Step 8: Final Coloring
Complete the drawing by adding color. Fill the frame with a bright color (like red), color the rivets a lighter shade, and shade the lenses with a dark grey or gradient to create a glass-like effect.
Step 1: Draw the Top Frame
Start by drawing a long, horizontal line that curves slightly upward over each eye area. In the center, create a small, shallow “U” shape to form the bridge that will sit on the nose.
Step 2: Complete the Outer Rim
From the ends of the top line, draw two large, rounded “U” shapes that curve downward and meet back at the bridge. This outlines the entire outer shape of the sunglasses frame.
Step 3: Add the Inner Lens Outlines
Inside the main frame, draw two smaller shapes that follow the outer curve. These lines represent the inner edge of the frame where the lenses are held, giving the frame some thickness.
Step 4: Draw the Left Temple (Arm)
Behind the left lens, draw two parallel horizontal lines that curve downward at the end. This creates the “arm” or temple of the glasses that rests over the ear.
Step 5: Draw the Right Temple (Arm)
Repeat the previous step for the right side. Draw two lines starting from the top-right corner of the frame, extending across the right lens and curving downward to finish the second arm.
Step 6: Color the Drawing
To finish, fill in your drawing with color. Use a dark red or burgundy for the frame and temples, and a solid grey or black for the lenses to give them a shaded look. Add black outlines to all the shapes to make them pop.
Step 1: Draw the Top Brow Line
Begin by drawing a long, horizontal line that curves slightly upward over each eye area, dipping slightly in the center to represent the top of the bridge.
Step 2: Add the Outer Edges
At both ends of the brow line, draw short, vertical lines that curve slightly inward to start the outer frame.
Step 3: Complete the Outer Frame Shape
Continue the lines from the outer edges downward, curving them inward to form the bottom of the lenses and meeting in the middle at a high arch to finish the nose bridge.
Step 4: Outline the Lenses
Inside the frame, draw two rounded rectangular shapes that follow the outer silhouette. These lines define the actual lenses within the frame.
Step 5: Draw the Left Temple (Arm)
Behind the left lens, draw a horizontal line that curves downward at the end to create the first temple or arm of the glasses.
Step 6: Draw the Right Temple (Arm)
Repeat the process on the right side. Draw two parallel lines starting from the top-right corner of the frame, extending behind the lens and curving downward to finish the second arm.
Step 7: Color the Drawing
Fill in the frame and temples with a bright neon green. Color the lenses a dark grey and the parts of the arms visible through the lenses a darker shade of green to add depth.
Hopefully, this drawing tutorial on Sunglasses will help you easily create a nice drawing.
