You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a surfboard with simple steps.
Let’s get started!
Step 1: Drawing the Sand Base
Start by sketching two low, overlapping wave-like curves to form a small patch of sand or ground at the bottom center of the canvas. This will be the base upon which the surfboard will rest.
Step 2: Drawing the First Board Curve
From the leftmost edge of your ground curves, draw a single, long, smooth line that arches dramatically upward and slightly to the right, creating the leftmost profile of the surfboard.
Step 3: Defining the Board Outline
Create the full surfboard shape by drawing a second long curve starting from the sand on the right and arching up to meet the top point of the first curve. The two curves should form a smooth, rounded, elongated oval shape, tapering slightly at the bottom.
Step 4: Adding a Flower Detail
Near the top-right section of the surfboard, draw a simple five-petaled flower shape with a small circle in the center. This adds a decorative element.
Step 5: Adding a Long Center Line
Draw a straight vertical line starting from the top point of the surfboard and extending all the way down the center to the sand base, passing through the flower.
Step 6: Adding Parallel Stripe Details
Draw three parallel, slightly angled lines across the middle section of the surfboard. These stripes should run from the left side to the right side, cutting across the center line.
Step 7: Final Coloring and Detail
Now, add color and finalize the design. Fill the entire body of the surfboard with a bright light blue. Color the three parallel stripes in a golden yellow. Fill the petals of the flower with bright pink and its center with yellow. For a complete scene, add subtle shading around the sand lines.
Step 1: Drawing the Main Body
Begin by drawing a tall, slender oval shape that tapers to a point at the top and a rounded curve at the bottom. This forms the primary silhouette of the surfboard.
Step 2: Creating the Inner Border
Draw a second, slightly smaller outline inside the main shape. Follow the contour of the first oval closely to create a consistent border around the entire board.
Step 3: Adding the Fins
At the bottom of the board, draw three fins. Place two pointed fins on the outer edges, overlapping the inner border, and one central fin pointing downward in the middle.
Step 4: Sketching the Wave Logo
In the center of the board, draw a stylized wave. Create a “crested” shape with a sharp curve on the right and a flowing tail on the left to represent ocean movement.
Step 5: Adding the Sun Detail
Directly behind the wave logo, draw a semi-circle with jagged, triangular points radiating outward to represent a rising sun.
Step 6: Drawing Horizontal Dividers
Add two pairs of horizontal lines across the board. Place one pair near the top (the nose) and the other pair near the bottom (the tail) to section off the design.
Step 7: Adding the Stringer Lines
Draw short vertical lines in the center of the top and bottom sections. These represent the “stringer,” the wooden strip that typically runs down the middle of a real surfboard.
Step 8: Final Coloring and Shading
Apply the final colors to your drawing. Fill the main body with a light aqua blue and the outer border and fins with a vibrant red. Color the sun orange and the wave a deeper blue to complete the tropical design.
Step 1: Establish the Main Body Outline
Start by drawing a large, elongated, elliptical shape angled from the top right to the bottom left. This form defines the primary canvas for the surfboard’s top surface and sets the overall perspective.
Step 2: Define the Board’s Edge and Depth
Along the bottom right curve of the ellipse, add a parallel, slightly offset line. Draw a small, curved line to connect these two at the bottom. This layering creates a 3D effect, defining the thickness and rail of the surfboard.
Step 3: Attach the Triple Fins
At the bottom edge of the board, add three triangular fins to the underside rail. Draw one fin prominent on the left edge, and two staggered fins on the inside rail to create depth and indicate the board’s stance.
Step 4: Add the Sun Logo
On the upper third of the surfboard, position a simple, stylized logo. Start with a central circle, and extend several short, radiating lines around its circumference to form a sun icon.
Step 5: Incorporate the Wave Graphic
Midway down the surfboard, draw two stacked, parallel, horizontal lines that follow the board’s curve. Between these lines, add a series of connected, rolling wave shapes to create a central decorative band.
Step 6: Apply the Final Colors
Complete the drawing by filling in the elements with vibrant colors. The main board should be painted purple. Fill the sun circle yellow, the wave band light blue, and the fins a darker shade of purple. All lines can remain a solid black to define the final cartoon-style illustration.
Step 1: Starting with a Curve
Begin by drawing a single curved line from the top left, sweeping down towards the center-right. This forms the primary curve of the surfboard’s left edge.
Step 2: Completing the Basic Outline
Connect a second curve to the top point of the first one, arching it down on the right side. This completes the main teardrop-shaped outline of the surfboard, leaving it open at the bottom.
Step 3: Detailing the Bottom Outline
Add two short, angular lines at the bottom of the surfboard outline, connecting the left and right curved lines to define the base or tail of the board.
Step 4: Placing the Fin
Inside the lower-right area of the main outline, draw a basic fin shape to establish its position.
Step 5: Creating the Longitudinal Stringer
Draw two parallel, vertical lines down the middle of the surfboard from top to bottom, which will form the stringer or core line of the board.
Step 6: Adding Upper Transverse Stripes
In the top third of the board, add a series of short, horizontal stripes spanning between the vertical stringer lines.
Step 7: Drawing Decorative Wave Patterns
Add two wavy lines across the middle section of the surfboard to create a classic ocean wave pattern.
Step 8: Inserting Lower Transverse Stripes
Below the wave patterns, near the bottom of the board, add three more horizontal stripes, matching the style of the upper stripes.
Step 9: Finalizing the Colors
The surfboard is colored, with yellow as the primary board color. The central stringer and fin are red, the waves are blue, the upper stripes are orange, and the lower stripes are green.
Step 1: The Initial Shape
Start with a single, large, elongated oval. The oval should be taller than it is wide and tilted slightly to the right.
Step 2: Defining the Outer Border
Trace a clean, continuous line around the outside of your oval, creating a thin, consistent border for the surfboard’s rail.
Step 3: Adding the Fin
At the bottom-right curve of the main body, draw a crescent or small wave-like shape. This serves as the single fin for the bottom of the board.
Step 4: Placing the Sun Icon
Draw a small circle in the very top-left section of the board’s interior, near the nose. Add a few short lines or points for simple sun rays.
Step 5: The Upper Ocean Wave
Directly beneath the sun, draw a single wavy line with two distinct peaks that spans the width of the inner board, creating the upper part of the board’s design.
Step 6: Adding Parallel Stripes
Below the wavy line, draw a group of four parallel, horizontal lines across the inner board, filling a portion of the upper deck.
Step 7: Sketching the Hibiscus Stamen
Moving to the center of the board, draw a simple stalk with a cluster of small ovals at its top, like a simple flower stamen. Position it pointing up and slightly left.
Step 8: Forming the Hibiscus Flower
Add five large, overlapping petal shapes around the stamen you just drew. Ensure they are large enough to be the focal point of the center design.
Step 9: Adding the Lower Ocean Wave
Finally, draw a second wavy line with two peaks across the bottom section of the inner board, balancing the wave at the top.
Step 10: Coloring the Surfboard
The surfboard is colored in with a dark teal color for the main body. The sun and parts of the upper and lower waves are a light aqua blue. The main hibiscus petals are a vibrant red, and the stamen is a pale yellow, matching the sun icon.
Hopefully, this drawing tutorial on Surfboard will help you easily create a nice drawing.
