You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a toaster with simple steps.
Let’s get started!
Step 1: Outlining the Toaster Body
Draw a simple, large rectangular shape with significantly rounded upper corners for the main body of the toaster. The bottom edge should be straight.
Step 2: Adding the Base and Toaster Feet
Below the straight bottom line of the toaster body, draw two smaller, shallow rectangular feet. One foot should be placed near the bottom-left, and the other near the bottom-right of the body.
Step 3: Creating Perspective and Sides
Within the large rectangular body, draw a vertical curved line starting from the left side of the top edge and extending down to the bottom edge. This line helps establish the side perspective of the toaster, showing its front and side faces.
Step 4: Drawing the Side Lever Handle
On the left side of the toaster, below the top edge and inside the main body, draw a rectangular box shape. This will serve as the top part of the handle mechanism. It should appear connected to the front of the side panel.
Step 5: Completing the Handle and Adding a Slot
Draw a second rectangular box shape directly below and touching the first handle box, then erase the line where they connect. Add a vertical U-shaped loop (like an upside-down ‘U’) on top of the upper box. Then, draw a long, narrow vertical rectangular slot that extends downwards from the lower box toward the bottom edge.
Step 6: Outlining the Toast
Draw a simple, cartoon-style loaf-of-bread shape with rounded tops and straight sides, popping out from the top center of the toaster, above the curved top edge.
Step 7: Adding the Outer Slice of Toast
To create the appearance of a second, larger slice of toast, draw another, larger, and slightly wider outline of the same bread shape directly behind the first one. This new outline should also extend above the curved top of the toaster.
Step 8: Applying Final Color
Fill the outer, larger slice of bread (the crust and back slice) with a golden-brown or light sienna color. Color the main, inner slice of bread with a pale cream or off-white color, and the inner side of its top crust the same golden-brown. Fill the entire body of the toaster with a solid light beige or putty color. Fill the two square handle pieces with a light grey, and color the vertical U-shaped handle and the long vertical slot below it in solid black. Color the two base feet light grey.
Step 1: Drawing the Front Panel of the Toaster
Draw a single closed shape with rounded corners, forming a slightly distorted rectangle. The top edge and left side should be slightly more curved than the other sides.
Step 2: Adding the Top and Back of the Body
Extend lines from the three upper corners of the first shape to create the top surface. Draw another rounded corner shape to form the visible back end of the toaster, connected to the extended lines. This establishes the basic 3D body.
Step 3: Creating the Base with Feet
Below the main body, draw a matching continuous curved shape for the base. Add two rounded, cylindrical foot shapes extending from the bottom of this base on the right side and front.
Step 4: Drawing the Slots on the Top Panel
On the top surface of the toaster, draw two long, thin rectangular openings. Within each opening, add lines to indicate depth. These are the slots for the bread.
Step 5: Adding the Knob to the Side Panel
On the curved right-side panel, below the top slots, draw a single oval-shaped knob. The lines should show a slight 3D perspective.
Step 6: Creating the Control Knob and Slot
Below the first oval knob, draw a long, narrow vertical rectangular slot. Add another simple oval shape at the top of this new slot, representing the second control.
Step 7: Drawing the Base Control Knobs and Markings
At the bottom of the right-side panel, draw one large circular knob. Within this circle, add a single straight vertical line. To the right of it, draw two smaller, simple circular buttons.
Step 8: Applying Final Color and Shading
Color the entire main body of the toaster with a medium light blue. Color the base with feet and the inner parts of the top slots with a dark grey. Color all knobs and buttons (oval and circular) with a medium grey. The short vertical line inside the large bottom knob should remain visible. The image is now complete.
Step 1: Draw the Front and Top Profile
Start by drawing a large, inverted U-shaped curve that is slightly wider at the bottom and has rounded top corners. This will form the front face and outline the left and top edge of the toaster.
Step 2: Form the Outer Shell Depth
Add a second curved line behind the first one, arching from the top-left corner and going down on the right side. This outlines the back and the right side of the toaster’s body, giving it a three-dimensional block shape.
Step 3: Add the Upper Edge of the Right Panel
Draw a short, slightly slanted straight line connecting the upper-right corner of the front face to the outer edge of the right side panel. This defines the top right shoulder of the toaster.
Step 4: Outline the Bottom Edges
Connect the bottom-left corner to the bottom-right corner of the front face with a slightly downward-curved line. Then, draw another angled line from the front-right corner extending to the back-right corner to define the bottom of the right side panel.
Step 5: Draw the Bottom Base
Add a parallel curved line just below the bottom edges you drew in the previous step, rounding the corners to create a solid, thick base wrapping around the bottom of the toaster.
Step 6: Draw the Handle Knob
On the right side panel of the toaster, draw a small, flat oval shape that represents the toaster’s pressing handle knob.
Step 7: Draw the Lever Slot
Draw a vertical, narrow rounded slot (like a long pill shape) that goes straight through the center of the handle knob, representing the sliding track for the lever.
Step 8: Create the Bread Slots
On the top panel of the toaster, draw two identical, parallel rectangular openings. Give them a bit of depth by drawing short vertical lines inside the slots to show the inner walls where the bread goes.
Step 9: Color Your Drawing
Paint the front panel in a light, soft peach or cream color. Color the top and right-side panels in a vibrant, warm orange. Make the bottom base a solid, dark gray. Color the slider knob in a medium green. Fill the inner walls of the bread slots with a dark reddish-brown to show depth.
Step 1: Draw the First Slice of Bread
Begin by drawing the top and side outline of a slice of bread. Create a wide, double-humped curved shape at the top that slopes downward on the right side, along with short vertical lines indicating the thickness of the crust on the left side.
Step 2: Draw the Second Slice of Bread
Directly in front of and slightly offset to the right of the first slice, draw an identical outline for a second slice of bread. This slice should partially overlap the first one, showing the same double-humped top and crust thickness.
Step 3: Draw the Toaster Openings
Draw the bottom edges of both bread slices using short straight lines. Around the base of each slice, draw rectangular outlines to represent the two slot openings on the top panel of the toaster.
Step 4: Outline the Toaster Body
Draw the main three-dimensional outer shell of the toaster. Start with curved corners at the top-left and top-right, and bring the lines downward to form the rounded, block-like body that houses the bread slots.
Step 5: Define the Panels and Edges
Draw a vertical dividing line down the front-left corner to separate the front panel from the side panel. Then, add a slanted line extending from this corner toward the back to clearly define the flat top surface of the toaster.
Step 6: Add the Bottom Feet
Underneath the body of the toaster, draw three small, rounded U-shaped tabs—one near the front-left, one near the front-middle, and one at the back-right—to serve as the toaster’s feet.
Step 7: Draw the Lever and Slide Slot
On the left-side panel, draw a vertical slot. Overlapping this slot, sketch a thick, curved oval-like shape to represent the push-down lever handle.
Step 8: Draw the Timer Dial
On the main front-right panel, draw a large circle to represent the timer dial. Inside the circle, add a small upward-pointing triangle to serve as the pointer, and place three small indicator circles arching over the top-left of the dial.
Step 9: Color Your Drawing
Paint the toaster’s main body (top, front, and side panels) a light, clean gray. Color the push-down lever handle on the left and the three bottom feet in a vibrant blue. Fill the vertical sliding slot on the side panel with solid black. Color the timer dial a slightly darker shade of gray, with a bright red pointer triangle inside and three matching red indicator dots above it. Color the center of the bread slices a warm, creamy beige, and color the outer crusts a rich, golden brown.
Step 1: Start with the Toasts
Draw two simple, wavy line figures side-by-side at the top of the canvas, outlining the basic shape of two slices of bread. This initial outline defines the crusts and the general structure of the toast.
Step 2: Add Bread Bases
Directly beneath each of the toast figures drawn in Step 1, add a simple, open, bracket-like line. These two additional lines act as base supports, grounding the bread outlines as if they are emerging from somewhere.
Step 3: Define the Toaster Body Frame
Create a large, wide, almost-square outline with significantly rounded corners centered below the toasts. The top line of this large rounded square should be positioned just below the base lines from Step 2, defining the main frame of the toaster.
Step 4: Form the Top Face and Slots
Connect the top of the toaster body with the bread. Draw two curved lines that slope inward from the upper side corners of the toaster frame to meet the bottom of the toast outlines. Also, add short vertical connector lines between the bottom of the toast and the top of the toaster face, effectively creating the defined edges of the two slots where the bread sits.
Step 5: Add a Sturdy Base
Draw a broad, rounded-corner shape across the entire bottom of the toaster frame established in previous steps. Inside this outer base line, draw a slightly larger, nested, and parallel rounded rectangle to create a solid, thick-looking support base.
Step 6: Place the Control Dial
In the center of the large front face of the toaster, draw a perfect circle. Inside this circle, add a single straight diagonal line from the center, effectively creating a control knob with a pointer.
Step 7: Start the Lever Handle
Directly below the dial, centered vertically, draw a smaller, horizontal, rounded-corner rectangle with a small indentation on its underside, outlining the initial shape of a lever button or handle.
Step 8: Complete the Lever and Slot
Draw a long, narrow, rounded-U-shaped channel line extending vertically from just beneath the dial and down through the lever handle, ending near the base. Inside the channel, just above the horizontal button shape from Step 7, draw a small vertical rounded rectangle to complete the appearance of a functioning lever and its slot. This makes the toaster look ready to operate.
Step 9: Final Coloring and Details
Fill the main toaster body frame and the top face with light, clean blue-white. Make the slots where the bread sits and the vertical lever slot a dark purple-maroon color. Color the control dial a medium grey. The lever button is light grey. The wide bottom base is a distinct dark purple-blue. Finally, give the two slices of toast a rich, golden-brown crust color and a slightly lighter tan-brown bread color, making them look toasted.
Hopefully, this drawing tutorial on Toaster will help you easily create a nice drawing.
