You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a toilet with simple steps.
Let’s get started!
Step 1: The Initial Shape (Tank Lid Foundation)
Begin by drawing a single, simple, elongated oblong shape. The corners should be rounded, creating an oval-like rectangle. This shape will form the basis for the water tank’s lid and defines the upper perspective of the final toilet. Center it toward the top of your drawing area.
Step 2: Building the Tank (Tank Body Construction)
Building on the lid shape, draw two slightly curved, vertical lines descending from the bottom corners of the lid. Connect these two lines with a shorter, horizontal curve that mimics the roundness of the lid. This forms the main volume of the water tank.
Step 3: The Base and Bowl (Seat and Hinge Placement)
Extend the base of the tank to the right with a shallow curve. Below this curve, draw another elongated oval, positioned horizontally to represent the future toilet seat, slightly angled forward in perspective.
Step 4: Defining the Bowl Rim (Bowl Contour and Rim Detail)
Now, connect the front-right of the tank base to the rightmost point of the horizontal oval with a deep, sweeping curve. Add a second, tighter curve just below this one, starting from the left side of the oval and meeting the larger curve.
Step 5: The Primary Neck (Connecting the Bowl to the Floor)
Add a powerful C-shape, curving inward from the rear of the bowl and then outward again, stopping below the bowl. Next, add a shorter, mirror-image curve to the front. This forms the primary ‘neck’ that supports the bowl and begins to anchor the toilet to the floor.
Step 6: Completing the Base (Floor Connection and Stability)
Complete the anchor point by extending the left and right curves of the neck downward and connecting them with a gentle curve, creating a flat base that meets the floor. This provides the entire structure with visual weight and stability.
Step 7: Adding Structure and Depth (Detail Lines and Tank Contour)
Add depth and detail to the main components. Add a line to the top of the tank lid to show its thickness. Draw a vertical line from the lid down the front of the tank. For the base, add internal lines to define the contour of the lower section, making the shape more defined and three-dimensional.
Step 8: Final Structural Touches (Hinge and Flush Valve)
Define the functional details. Draw a simple, stylized flush button (or lever) on the front-left of the water tank. Add a small hinge connecting the seat to the bowl, clarifying how the seat operates.
Step 9: Adding Full Color (Completed Scene)
Finally, apply a comprehensive color palette to the entire drawing. Fill the tank body, tank lid, base, and external bowl sections with a soft, uniform blue. The toilet seat and the flush button should be colored in a pale, rosy pink.
Step 1: The Top Lid Profile
Start by drawing a flat, horizontally elongated oval shape with smoothed edges. This simple curved loop forms the flat surface profile of the toilet seat lid, establishing the upper perspective of the bowl structure.
Step 2: Adding Rim Thickness
Directly underneath the initial oval, add a shallow, parallel curved line that hugs the bottom edge. This line connects to the sides of the oval, giving the toilet seat lid a realistic thickness and a three-dimensional look.
Step 3: Drawing the Seat Layer
Beneath the lid assembly, sketch a wider, matching curved layer. This layer duplicates the contours above but extends slightly lower, forming the actual toilet seat directly underneath the main lid.
Step 4: Outlining the Main Bowl
From the outer edges of the seat structure, draw a deep, smooth, semi-circular bowl shape that curves downward. This forms the primary porcelain bowl of the toilet, completing the upper utility assembly.
Step 5: Creating the Pedestal Base
Extend two lines downward from the bottom center of the curved bowl. Flare these lines outward near the bottom and connect them with a straight horizontal line along the floor, establishing a stable, flared pedestal base.
Step 6: Rising the Water Tank Sides
Moving to the top rear of the seat assembly, draw two vertical lines extending straight upward from the back corners of the seat lid. These lines provide the lateral boundaries for the water tank
Step 7: Capping the Tank Lid
Connect the two vertical tank lines at the top by drawing a thick, rounded rectangular cap. The bottom edge of this cap should be a straight horizontal line closing off the tank body, forming the complete water tank lid.
Step 8: Adding the Flush Lever
Inside the upper right corner of the water tank body, draw a small, stylized horizontal peanut shape. This details the flush button or lever mechanism, finalizing all line work for the structure.
Step 9: Final Coloring and Outlines
To complete the illustration, apply the final colors to the entire drawing. Color the water tank, tank lid, main bowl, and pedestal base with a very light, pastel blue-gray shade. Fill the top toilet seat lid with a vibrant, solid pink. Color the flush lever a solid neutral gray. Ensure all elements are defined by clean, solid black outlines to give the final drawing a polished cartoon appearance.
Step 1: Draw the Cistern Lid
Start by drawing a horizontal rectangle with rounded corners near the top left of your drawing area. This shape will form the lid of the toilet tank, or cistern.
Step 2: Add the Cistern Tank
Next, draw a taller vertical rectangle directly beneath the lid. The width should be slightly smaller than the lid. Connect the lid to the new rectangle, forming the main body of the toilet’s water tank.
Step 3: Insert the Flush Handle
Within the top section of the cistern tank you just created, on the upper left side, draw a simple outline of a flush lever or handle.
Step 4: Outline the Main Base
Moving to the lower portion of your drawing area, sketch a long horizontal oblong shape that extends forward from under the tank. This is the main structure for the seat and bowl.
Step 5: Detail the Toilet Seat and Lid
Above the horizontal base you just drew, add two thin, rounded stacked layers to represent the closed toilet lid and seat. Place them so they fit neatly onto the base.
Step 6: Create the Toilet Bowl
Draw a large, smooth semicircle that connects to the underside of the main horizontal base. This creates the visible part of the toilet bowl.
Step 7: Add the Floor Mount
Finally, complete the structure by adding the curved base that mounts to the floor. Draw lines curving downwards from the bowl and base, connecting to a smaller flat rectangle at the very bottom.
Step 8: Apply the Final Colors
For the final touch, fill the drawing with color. Make the main toilet structure (tank, lid, bowl, base) light teal. Color the toilet seat a soft pink. Lastly, the flush handle is colored in grey.
Step 1: Draw the Open Toilet Lid
Start by sketching a large, vertical oval shape with a slightly flattened bottom. This will serve as the toilet lid in an open position.
Step 2: Add the Hinge Indicators
At the bottom edge of the oval lid, draw four small, evenly spaced vertical lines. These short strokes will mark the location of the hinges connecting the lid to the seat.
Step 3: Outline the Toilet Seat
Projecting forward from the hinges, draw a large horizontal oval ring to create the toilet seat. Make sure to define the outer rim and the inner opening clearly.
Step 4: Sketch the Cistern Lid
Behind the upper portion of the open lid, sketch a blocky, horizontal rectangular shape with rounded corners. This forms the top cap of the water tank.
Step 5: Outline the Water Tank Body
Draw two vertical curved lines extending downward from the cistern lid, curving slightly towards the center behind the toilet lid. This establishes the body of the flush tank.
Step 6: Add the Flush Handle
On the right-side panel of the water tank body, sketch a small, horizontal flush lever handle protruding outward.
Step 7: Define the Rim Base
Directly underneath the toilet seat, draw an additional curved line that follows its bottom edge and extends back towards the tank, creating the upper rim of the bowl structure.
Step 8: Detail the Inside of the Bowl
Inside the central opening of the toilet seat, draw a wavy horizontal line to represent the water surface, and add a small circle at the center to indicate the drain hole.
Step 9: Outline the Lower Bowl
Beneath the rim base, sketch a large, sweeping curved line to map out the rounded contours of the lower toilet bowl.
Step 10: Complete the Pedestal Base
Draw the bottom pedestal section by extending lines downward from the bowl to create a wide, sturdy base where the toilet connects to the floor.
Step 11: Apply the Final Colors
The main porcelain body (water tank, cistern lid, bowl, and pedestal base) is colored in a bright blue. The open lid and the toilet seat are filled with a warm yellow. The flush handle is colored red. The water inside the bowl is a light cyan blue, while the drain hole at the center is black.
Step 1: Draw the Lid
Start by drawing an upside-down U-shape with a flat, straight line connecting the bottom ends to create the main body of the toilet lid.
Step 2: Add the Hinge
At the very bottom center of the lid shape, add a thin, long horizontal bar with two tiny vertical tabs locking onto it to represent the toilet seat hinge.
Step 3: Outline the Seat
Beneath the hinge, draw a large horizontal oval. Inside this oval, draw a smaller matching oval to create the opening of the toilet seat.
Step 4: Sketch the Water Tank Top
From the upper sides of the lid, extend two curved horizontal wings out to the left and right, capping them off with slightly rounded vertical edges to form the top piece of the water tank.
Step 5: Complete the Water Tank Body
Draw two vertical lines curving gently downward from the outer edges of the tank top, connecting them to the sides of the lid just above the seat to finish the water tank body.
Step 6: Add the Flush Lever
Add a small, curved handle shape on the right side of the water tank for the flush lever.
Step 7: Define the Inner Rim
Next, draw a curved line along the bottom inside edge of the seat opening to give the rim thickness.
Step 8: Sketch the Water Line
Inside the bottom center of the inner bowl opening, draw a small, smooth upward arc to mark the surface level of the water.
Step 9: Build the Bowl
Draw a large, deep semi-circle underneath the toilet seat to outline the outer structure of the main toilet bowl.
Step 10: Add the Base
From the bottom of the semi-circle bowl, extend two lines downward that flare out sharply at the bottom into a wide, flat horizontal foot to create the base of the toilet fixture.
Step 11: Color the Drawing
Finally, color your illustration to bring it to life. Use a very light, soft blue-gray shade to fill in the entire porcelain body of the toilet, including the tank, lid, seat, bowl, and base. Use a slightly darker gray for the flush handle. For the water section at the bottom of the bowl, fill it with a vibrant, bright blue color.
Step 1: Draw the Tank Lid
Start the drawing by sketching a rounded rectangle at the top of the canvas, positioned horizontally. This initial shape will serve as the top surface of the toilet tank lid.
Step 2: Form the Tank Body
From the outer corners of the rounded rectangle drawn in Step 1, extend two parallel vertical lines downward. Connect the bottom of these lines with a horizontal line, giving the shape rounded bottom corners. This creates the main rectangular form of the toilet tank, directly beneath the lid.
Step 3: Add the Flush Handle
On the upper right side of the tank body (the rectangle created in Step 2), add a small fixture. This is done by drawing a small circle for the base and a short, horizontal, rounded bar extending to the right from the circle. This simple addition represents the flush lever.
Step 4: Sketch the Toilet Seat (Top View)
Moving below the tank, draw a large, open crescent or C-shape directly beneath it. This form is a flattened, oval ring viewed slightly from above, with the open end of the C facing downward, establishing the basic outline for the toilet seat.
Step 5: Define the Inside of the Seat and Lid Details
This step involves adding inner structure. Inside the crescent shape from Step 4, draw a smaller, matching open C-shape, creating the inner edge of the seat. At the very back (where the crescent is closest to the tank), draw two small horizontal connecting lines and a short upward line, starting to define the attachment points and the very bottom rim.
Step 6: Outline the Rim and Front of the Bowl
Now, draw a large, rounded, flattened curve that originates from the sides of the toilet seat (near where it connects to the tank) and arches downward in front of the seat shape. This curve frames the outer front edge and the main rim of the toilet bowl.
Step 7: Form the Bowl Body
From the lowest points of the curve drawn in Step 6, extend a large, smooth, U-shaped curve downwards. This large curve creates the main exterior shape of the toilet bowl itself. Ensure it looks substantial enough to support the structure above.
Step 8: Add the Base of the Toilet
To finish the basic structure, draw two lines extending vertically downward from the lowest center curve of the toilet bowl from Step 7. At the bottom, connect these lines with a wide, flared oval shape to create a stable base, anchoring the toilet to the ground.
Step 9: Finalize with Color
The final step is to fill in the completed structure with color and solidify the lines. All the outlines are now solid black. Fill the toilet tank (lid and body), the toilet seat, the bowl exterior, and the base with a light grey color. Fill the inside area of the bowl, where water would be, with a light blue color. The flush handle base remains uncolored, but the lever handle is grey. The overall image now appears finished with clear black lines and simple, light colors.
Hopefully, this drawing tutorial on Toilet will help you easily create a nice drawing.
