You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a tricycle with simple steps.
Let’s get started!
Step 1: Main Frame Arc
Begin by drawing a long, gentle downward curve, composed of two parallel lines. This forms the main body or backbone of the tricycle.
Step 2: Head Tube
At the front end of the main frame arc, draw a vertical rectangle that connects to both of the parallel lines. This structure is the head tube, where the front fork will attach.
Step 3: Front Fork and Handlebar Stem
Draw a U-shaped structure, opening upwards. Place the top portion inside the head tube, and extend the bottom part below it. This forms the front fork, which will hold the front wheel, and the lower part of the handlebar stem.
Step 4: Handlebar Grip
At the top end of the handlebar stem, draw an angled, rounded rectangle pointing towards the right. This simple shape represents the handlebar grip.
Step 5: Front Wheel
Draw a large circle centered on the lower part of the front fork. Inside this large circle, draw a smaller concentric circle for the hub, and a dot in the absolute center.
Step 6: Rear Wheels
At the rear end of the main frame arc, draw two identical, slightly smaller circles, positioned one behind the other. Each rear wheel should have a small concentric circle in the center, similar to the front wheel.
Step 7: Rear Fender/Mudguard
Draw a curved line arched over the top of the rear wheels. This line should connect to the main frame just in front of the wheels, serving as a fender or mudguard.
Step 8: Seat Support
Draw two short, vertical parallel lines extending upwards from the main frame, positioned between the front and rear wheels. This will create the support post for the tricycle seat.
Step 9: Seat
On top of the seat support post, draw a flat, rounded rectangle, slightly wider than the support. This simple shape defines the seat of the tricycle.
Step 10: Coloring the Tricycle
Fill the drawing with color. The main frame and the front head tube are light blue. The handlebars and the seat support post are light grey. The handlebar grip and the seat are yellow. The outer tires are black, and the large central disc of all three wheels is bright red. The hubs in the very center of the wheels remain light grey.
Step 1: Draw the Main Frame Arc
Start by drawing a single, bold, downward-curving line that represents the main structural tube connecting the front of the tricycle to the rear.
Step 2: Add Head Tube and Rear Axle
At the front (upper) end of the arc, add a short vertical tube (the head tube). At the rear (lower) end, add a short horizontal tube extending outwards.
Step 3: Draw the Rear Wheels
Attach a wheel to each end of the rear axle tube. These are simple circles. For detail, add a smaller concentric circle inside each one to define the hub.
Step 4: Add the Seat Support and Seat
Draw a small vertical post upward from the main frame arc, just forward of the rear wheels. On top of this post, draw a simple, rounded, triangular shape for the seat.
Step 5: Draw the Handlebar Base
Insert a short vertical tube (the stem) into the top of the head tube you drew in Step 2. At the top of the handlebar stem, add a horizontal tube that curves gently upward at both ends. This is the base structure for the handlebars.
Step 6: Add Handlebar Grips
At each upturned end of the handlebar base, draw a slightly thicker, rounded cylindrical shape. These are the grips where the rider holds on.
Step 7: Draw the Front Fork
Attach a U-shaped structure to the bottom of the head tube, pointing downwards. This is the fork that will hold the front wheel.
Step 8: Draw the Front Wheel
Draw a large circle within the front fork, making sure it is centered around the fork’s connection point. Add a smaller concentric circle inside for the hub, similar to the rear wheels.
Step 9: Add Pedals and Finalize Details
Finally, attach a pedal to the center hub of the front wheel. Draw a short crank arm extending from the hub, with a flat, rectangular pedal attached at the end. Repeat this on the opposite side (visible in the final colored image).
Step 10: Coloring the Tricycle
Now, apply color to the line drawing. The main frame, front fork, and handlebar stem are painted bright lime green. The handlebars, front fork crown, and rear axle are a dark, charcoal grey. The seat and the pedals are a contrasting bright red. The tires are black, and the inner disc of all three wheels is a pale yellow.
Step 1: Draw the Main Frame
Begin by sketching the main diagonal frame of the tricycle, which consists of two parallel lines connected at the ends, forming an elongated rectangular shape angled upwards.
Step 2: Add the Seat
On the upper section of the main frame drawn in the previous step, add the seat. This is formed by an oval shape for the cushion and a small vertical support underneath connecting it to the frame.
Step 3: Form the Handlebar Post and Rear Axle
At the top end of the main frame, attach a short vertical post for the handlebars. At the bottom end, add a horizontal structure that will serve as the rear axle.
Step 4: Draw the Rear Wheels
Attach two circles to the ends of the rear axle structure defined in the previous step to create the two back wheels. Add a smaller concentric circle inside each wheel to represent the hubcap.
Step 5: Add the Front Fork and Fender
At the top of the handlebar post, attach a U-shaped fork extending downwards. Add a curved fender, shaped like a wide arch, directly above where the front wheel will be.
Step 6: Form the Front Wheel
Draw a large circle between the prongs of the front fork to create the front wheel. Similar to the rear wheels, add a smaller concentric circle inside for the hubcap.
Step 7: Sketch the Handlebars
Extend a curved line from the top of the handlebar post, bending it upwards on both sides to form the shape of the handlebars.
Step 8: Add Handle Grips
At the far ends of the curved handlebars sketched previously, add small cylindrical shapes to represent the hand grips.
Step 9: Apply Color to the Tricycle
Fill in the frame with bright orange. The seat, handlebars, and front fork should be colored light blue. The wheels have dark brown tires, with the inner hubs and the hand grips colored a pale beige. The fender is also colored light blue.
Step 1: Sketch the Pedal
Start by drawing a small, rounded rectangular shape with a smaller inner rectangle to represent the pedal of the tricycle.
Step 2: Draw the Front Fork
Extend a tall, inverted U-shaped structure upwards from the area around the pedal to form the front fork that will hold the main wheel.
Step 3: Form the Front Wheel
Draw a large circle centered within the front fork to create the main front wheel. Add a smaller inner circle to represent the hub.
Step 4: Add the Handlebar Stem
Draw a short, rectangular box shape sitting on top of the front fork to serve as the stem that connects the fork to the handlebars.
Step 5: Sketch the Handlebars
Extend a curved, T-shaped bar from the top of the stem. Add rounded, elongated caps at the ends of these bars to form the hand grips.
Step 6: Draw the Main Body Frame
From the handlebar stem, draw a long, sweeping curved line that arches downwards and backwards, terminating in a structure that will hold the rear wheels.
Step 7: Add the Rear Wheels
At the back end of the main frame, draw two small, circular wheels. Each should have a smaller circle inside to represent the hubcap.
Step 8: Include the Seat
On the upper part of the curved main frame, draw an oval-shaped seat supported by a small, angled pillar connecting it to the frame.
Step 9: Apply Color to the Tricycle
Color the main body frame and the vertical seat support bright red. The front fork, handlebar stem, and seat are colored yellow. The hand grips, pedals, and the inner hubs of the rear wheels are colored light gray. The tires for all three wheels are dark brown, while the center hub of the front wheel is also light gray.
Step 1: Drawing the Handlebars
Start by drawing the handlebars, which consist of a curved horizontal bar with rounded grips on both ends, creating an M-shape structure.
Step 2: Adding the Steering Column
From the center of the handlebars, draw a short vertical tube extending downwards. Add a curved line connecting the back of this tube to the handlebar base for reinforcement.
Step 3: Creating the Front Fork
Extend two parallel vertical lines downwards from the steering column, curving them outwards at the bottom to form a U-shape fork, ready to hold the front wheel.
Step 4: Drawing the Front Wheel
Draw a large circle centered within the front fork. Add a smaller concentric circle inside it for the hub and another small ring around the hub to complete the wheel structure.
Step 5: Constructing the Frame
Attach a curved main frame tube to the steering column, just below the handlebars. Extend this frame horizontally backward and then curve it downwards.
Step 6: Adding the Rear Wheels
Draw two smaller wheels, identical in structure to the front wheel, and attach them symmetrically to the lower rear curve of the frame, establishing the tricycle’s three-point stance.
Step 7: Placing the Seat
Position an oval-shaped seat on top of the horizontal frame, securing it with a short, angled post connected to the frame tube.
Step 8: Applying the Colors
Color the main frame and front fork orange. Fill in the handlebars and the seat post with blue. The grips and the seat are colored yellow. The wheels have yellow tires, blue hubs, and grey centers.
Hopefully, this drawing tutorial on Tricycle will help you easily create a nice drawing.
