Tuxedo Sam Drawing Tutorial - How to draw Tuxedo Sam step by step

1. Draw Cute Tuxedo Sam From Sanrio in Simple Steps

Today, drawing123.com will guide you how to easily draw Tuxedo Sam with simple steps.

Let’s get started!

Step 1: Draw the Head Arch

Draw a smooth, large dome-like arc at the top to serve as the upper outline of Tuxedo Sam’s head.

Step 2: Add the Flippers

On both lower sides of the arch, draw two outward-curving, rounded shapes pointing down to create his flippers (arms).

Step 3: Outline the Webbed Feet

Below the main body, draw two puffy, three-lobed webbed feet sitting side-by-side.

Step 4: Connect the Body Lines

Draw curved outer body lines on each side extending from the flippers down to the feet, and add a short horizontal line connecting the inner sides of both feet to complete the body outline.

Step 5: Draw the Sailor Hat Base

At the top-right side of his head, draw a double-layered curved brim for his sailor hat.

Step 6: Complete the Sailor Hat

Draw a rounded dome top over the hat brim and add a small, floppy ribbon bow attached to the right side of the hat.

Step 7: Add the Beak and Belly Outline

In the lower-center section, draw a horizontal oval shape for the beak. From the sides of the beak, draw a large arch that connects down to the feet to form his white belly area.

Step 8: Add the Eyes and Bowtie

Draw two small, vertical oval shapes above the beak for the eyes. Right beneath the beak, add a neat bowtie shape in the middle of his belly.

Step 9: Color the Character

Fill in the drawing with colors to bring Tuxedo Sam to life:

– Body: Light blue

– Belly and Hat Dome: White

– Beak and Feet: Bright yellow

– Bowtie: Bright red

– Hat Band and Ribbon: Light blue with black outlines

– Eyes: Solid black

2. Easy Step by Step Method to Draw Tuxedo Sam

Step 1: Draw the Sailor Hat Brim

Draw an angled, double-layered band on the upper left side to create the brim of the sailor hat.

Step 2: Add the Sailor Hat Dome and Ribbon

Draw a rounded dome behind the brim to form the top of the hat, and attach a small ribbon bow with a notched end to the bottom-left of the brim.

Step 3: Outline the Head and Left Flipper

Draw a large, smooth arc extending to the right to form the top of the head. Then, draw a downward curve from the bottom of the hat brim that swoops out to form his left flipper.

Step 4: Draw the Right Flipper

On the right side where the head arch ends, draw an upward-curving flipper extended out to the side.

Step 5: Draw the Lower Body and Left Foot

Draw a curved line continuing from the left flipper down to form the lower belly outline, and add a small, flattened three-lobed foot at the bottom.

Step 6: Draw the Raised Right Foot and Back Outline

Draw a larger, upright three-lobed webbed foot raised on the right side, and connect it to the upper right body with a short curved back line.

Step 7: Add the Facial Details and Bowtie

Draw a horizontal beak shape in the center of the face, two vertical oval eyes above it, and a neat bowtie right below the beak.

Step 8: Outline the Belly

Draw a large, smooth arch starting from the beak area and sweeping around the body to separate his white belly panel from the rest of his body.

Step 9: Color the Character

Fill in the drawing with colors to complete the character:

– Body: Light blue

– Belly and Hat Dome: White

– Beak and Both Feet: Bright yellow

– Bowtie: Bright red

– Hat Brim Band and Ribbon: Light blue

– Eyes: Solid black

3. Simple Instruction Guide to Draw Tuxedo Sam Character

Step 1: Start with the Sailor Hat

Draw a small sailor hat at the top right of your drawing area. The hat consists of a semi-circle top and a layered rim. Add two small, curved ribbon tails attached to the back right of the hat.

Step 2: Define the Left Side

From the front edge of the sailor hat, draw a long, curving line downwards to the left. This line creates the left boundary of the penguin’s head and body.

Step 3: Draw the Raised Foot

At the bottom of the long curved line you just drew, sketch an irregular, rounded shape. This shape represents the penguin’s left foot, which is raised.

Step 4: Close the Body Outline

Starting from the back edge of the sailor hat, draw a long curved line down the right side. Connect the bottom of this line to the side of the raised foot shape with another slightly curved line, completing the entire outline of the penguin’s body.

Step 5: Add the Lower Foot

Underneath the body, just to the right of the center, add another irregular, cloud-like shape. This represents the penguin’s other foot.

Step 6: Draw the Arms

Draw two large ‘C’-shaped curves inside the body outline. One curve is on the left, near the top, and the other is on the right, also near the top. These curves form the penguin’s flippers or arms, making it look like it’s raising them.

Step 7: Sketch the Face and Bowtie

Inside the main body and between the flippers, draw the face and bowtie. Draw two small, upward-curving lines for the eyes. Below them, add an oval for the beak. Under the beak, draw a simple bowtie shape using two small triangles connected in the center.

Step 8: Define the Belly Area

Draw connecting lines inside the body to differentiate the dark back from the light belly. These lines connect the bowtie to the outer body outline and the raised foot, defining the inner white area of the penguin.

Step 9: Complete with Full Color

Now it’s time to add all the colors to complete the drawing, using black outlines throughout. Fill the sailor hat with white and color its rim with bright blue. The raised foot and the beak should be a vibrant yellow. The bowtie is solid red. The large main part of the penguin’s body, including the head and flippers, is a deep blue. The defined inner belly area is white. The smaller foot peeking out from the bottom is also yellow. This completes the full color penguin drawing.

4. Beginner Tutorial for Drawing Tuxedo Sam Easily

Step 1: The Head Outline

Start by drawing a large, smooth, upside-down “U” shape or a wide arch. This single curved line forms the entire top and sides of the penguin’s head and face outline.

Step 2: Add the Flippers

From the lower ends of the wide arch, extend two small, rounded “C” shapes outwards. One curve is on the left side, and one is on the right side. These will become the penguin’s flippers or arms.

Step 3: Define the Body Width

Draw a straight vertical line downward from the bottom inner corner of each flipper. These lines establish the width and overall shape of the penguin’s main body.

Step 4: Draw the Feet

At the bottom of the two vertical lines you just drew, add two irregular, wobbly, oval-like shapes with several rounded bumps on top. These two shapes represent the penguin’s feet, placed on either side.

Step 5: Form the Lower Body

Draw a smooth, slightly curved line horizontally between the bottom of the two feet to connect them. Then, add a final, outward-sweeping curved line to the lower-right side of the body, creating a small, rounded tail.

Step 6: Add the Sailor Hat

On the top-right side of the penguin’s head, draw a sailor hat. The hat is made of two curved sections, with a central line running through them. Add two small, ribbon-like, ‘M’-shaped tails attached to the back of the hat.

Step 7: Add the Bow Tie

In the center of the penguin’s body, between the flippers, draw a complete bow tie. Start with a central circle and add two triangular-oval wing shapes on either side. Draw two curved lines downwards from the center of the bow tie, connecting it to the top of each foot to complete the tuxedo vest look.

Step 8: Draw the Face

Inside the upper part of the body outline, draw the face. Place two solid black, vertically oriented ovals for the eyes. Below them, in the center, add a single solid, slightly rounded triangle for the beak. Add a medium-sized solid pink oval on each cheek, just below and slightly to the outside of the eyes, to create blush.

Step 9: Add Final Colors

Fill in the drawing with color. The main body of the penguin, including the flippers, is a light blue. The entire inner belly area, below the face and above the feet, is white. The feet and the beak are a bright yellow. The two larger cheek ovals are a soft pink. The sailor hat and the central bow tie are a dark, rich purple, except for the white patch on the top of the hat.

5. Tuxedo Sam Step by Step Drawing Guide with Easy Instructions

Step 1: Draw the Sailor Hat

Start by drawing a sailor hat on the top right side. Outline the main rim of the hat, the rounded cap portion, and add a small ribbon attached to the back.

Step 2: Outline the Head, Back, and Wing

From the top left of the sailor hat, draw a smooth curved line going over to form the top of the head. Continue down into a rounded outstretched wing on the left, then bring the curved line downwards and across to form the penguin’s plump body line.

Step 3: Add the Left Foot

Draw a wavy, scalloped shape underneath the bottom-left of the body to form the penguin’s left foot with visible toes.

Step 4: Draw the Right Foot

At the bottom right side of the body, draw a large, rounded paw-like shape with three rounded toe bumps to create the right foot.

Step 5: Outline the Right Arm

Draw a curved arm shape resting on the front of the body, extending from the bottom right side up toward the chest area.

Step 6: Draw the Facial Features and Bowtie

Draw two small circular eyes in the middle of the head area. Add a triangular beak with rounded edges between the eyes. Right below the beak, draw a bowtie shape.

Step 7: Define the Belly Marking

Draw a smooth curved line across the front of the body, starting near the bottom left and swooping up under the beak and bowtie to separate the belly area from the main body outline.

Step 8: Color the Character

Fill in the drawing with colors to bring Tuxedo Sam to life:

– Body and Upper Arm: Light pastel blue

– Belly and Hat: Crisp white

– Beak and Both Feet: Bright yellow

– Eyes: Solid black

– Bowtie: Vibrant red

– Hat Trim and Ribbon Details: Darker blue

6. Draw Tuxedo Sam in a Few Simple Steps for Beginners

Step 1: Draw the Base Outline of the Body

Draw a large, rounded shape with a wide, flat bottom that curves up along the left side, over the top, and continues down to form the basic chubby body silhouette.

Step 2: Add the Flippers

Draw two short, rounded flippers extending outward from both sides of the body outline.

Step 3: Complete the Head Outline

Draw a short, slightly curved line upward on the top right side to close the head outline.

Step 4: Draw the Sailor Hat

At the top right of the head, draw a small sailor hat angled slightly downward, complete with a brim line, a rounded top cap, and a small ribbon attached on the right side.

Step 5: Draw the Feet

Underneath the bottom body line, draw two small feet with scalloped edges for the toes.

Step 6: Draw the Facial Features and Bowtie

In the upper center of the body, draw two happy, downward-curving arcs for closed eyes with small horizontal accent lines underneath. Between the eyes, draw an oval shape for the beak, and directly under it, draw a small bowtie outline.

Step 7: Outline the White Belly Patch

Draw two smooth curved lines starting from the sides of the beak and swooping down to the bottom corners of the body to define the large belly patch area.