You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a vulture with simple steps.
Let’s get started!
Step 1: Draw the Beak and Face Base
Start by drawing the central shape of the beak in the upper part of your paper. It is a slightly triangular, downward-pointing shape with a curved top. Inside this shape, add two small curved lines for nostrils and a smile line.
Step 2: Form the Head Outline
Using the beak as a center point, draw a large circle around it. This circle defines the outer boundary of the vulture’s head. Make sure the bottom part of the beak slightly overlaps the bottom of the circle.
Step 3: Add the Eyes
Inside the head circle, just above the beak, draw two smaller circles for the eyes. Inside each eye circle, add a smaller circle to represent the pupil, giving the vulture its direct gaze.
Step 4: Add the Neck Ruffle
Below the head and neck area, draw a cloud-like shape. This wavy, scruffy line will form the prominent feather ruffle around the vulture’s neck. A small ‘U’ shape below the beak indicates the front of the neck.
Step 5: Draw the Body and Feathers
From the sides of the neck ruffle, draw a large, egg-like shape extending downwards. This represents the vulture’s main body. Inside the body shape, add a few small, wavy feather lines to create texture on the chest.
Step 6: Form the Wings
Attached to the shoulders of the body, just below the neck ruffle, draw the large wings. Each wing has a broad, curved top edge and is made of several large, distinct, rounded feather shapes.
Step 7: Add the Legs and Feet
At the bottom of the body, draw two sturdy legs. Each leg should end in a large foot with three prominent, clawed toes pointing forward.
Step 8: Add the Tail Feathers
Just below the body and between the legs, add a simple cluster of a few curved tail feathers.
Step 9: Final Step – Color and Detail
The outlines are already in place, so now color the head, the neck section inside the ruffle, and the small throat pouch with pink. Color the beak, legs, and feet in yellow-orange. The eyes should be colored dark with white highlights. The neck ruffle itself is colored white. The entire body, wings, and tail feathers are filled in with dark gray.
Step 1: Establish the Beak and Head Structure
Start by drawing the central beak structure. Begin with the main triangular shape of the lower beak. Then, add a curved shape above it for the upper beak. Finish this step by drawing a smaller, third curved line below the first two to indicate the chin, all connected together.
Step 2: Form the Head Outline
Draw a large, almost perfect circle that encircles the entire beak structure from Step 1. The beak should be positioned primarily within the lower-right quadrant of this circle, attached to its inner edge.
Step 3: Draw the Neck and Chest Base
At the bottom-right of the head circle, just behind the beak and chin, draw a simple curved line extending downwards and to the left. This defines the curve of the bird’s neck. Extend the lower part of this curve a bit more to begin the base line for the chest.
Step 4: Add the Neck Ruffle
Around the very bottom of the head circle and neck curve, draw a series of bumpy, scalloped lines. This wavy, fluffy shape represents the downy feather ruffle that often sits at the base of a vulture’s neck. Make sure it partially overlaps the bottom edge of the head circle and the top of the neck line.
Step 5: Outline the Body
Draw a large, slanted oval shape starting from the bottom of the neck ruffle. This oval should be tilted downwards and to the left, and it will define the vulture’s body in flight.
Step 6: Form the Primary Wing
On the left side of the body oval, starting from where it meets the neck, draw a large wing shape. This wing is broad and points up and to the left, with large, distinct feather cutouts along its trailing edge.
Step 7: Form the Secondary Wing
Now, on the right side of the body, just below the neck and chest, draw the second wing. This wing points downwards and to the right, also featuring large feather cutouts along its bottom edge. The overall silhouette of the two wings spreading in opposite directions captures the motion of flight.
Step 8: Add the Tail Feathers
At the very back, bottom-left of the body oval, draw a small cluster of tail feathers. Make them a few simple, rounded feather shapes pointing backwards.
Step 9: Define the Eyes
This is the final structural addition. Inside the head circle, just above and to the left of the beak, draw two circles for the eyes. Inside each eye, add a smaller solid black circle with a tiny white dot to create expressive, focused pupils.
Step 10: Final Step – Apply Color and Details
Now it’s time to add color. Based on the final image, fill the entire head and neck with a soft pink color. Color the upper and lower beak in a golden-yellow. Fill the body, wings, and tail feathers completely with brown. Finally, color the fluffy neck ruffle in white, making sure all the dark outlines are crisp.
Step 1: Start with the Beak
Begin by drawing a simple, curved triangular shape with a small curve at the end to create the tip of the vulture’s beak. This defines the front of the head and the direction the bird is looking.
Step 2: Draw the Head Contour
Using a single continuous line, draw the shape of the vulture’s head. Start at the top of the beak, curve up to form the top of the head, then back down and forward to create the neck and throat area, ending below the beak.
Step 3: Add the Neck Ruff
Create the distinctive neck ruff. This is a jagged, flame-like or spiky line that attaches to the base of the neck you just drew, giving the head a framed look.
Step 4: Sketch the Upper Wing
Extend a long line from the spiky neck ruff upwards and slightly to the left to form the top edge of the wing. From this point, draw a wavy, scalloped line downwards to create the bottom edge and feathers of the primary wing, completing its basic shape.
Step 5: Define the Body
Draw a large, smooth curve that connects the bottom edge of the newly drawn wing to the bottom of the neck ruff. This single line creates the belly and forms the main mass of the vulture’s body.
Step 6: Outline the Lower Wing
From the lower-right side of the body, draw another curved and scalloped line, similar in style to the first wing but positioned lower. This creates the outline for the second wing, showing the bird from a slight side profile in flight.
Step 7: Add the Tail Feathers
Focusing on the left side of the body curve, add a smaller, spiky cluster of three rounded points to create the tail. This completes the body’s main structural outline.
Step 8: Draw the Eye and Final Detailing
With the main body complete, go back to the head. Draw a small circle for the eyeball, and a tiny filled circle inside it for the pupil, giving the vulture its sight. All the basic lines for the drawing are now finished.
Step 9: Final Color
The final step is to fill in the colored sections. Make the entire body, both wings, and the tail a dark brown. Color the bald head and neck in a light pinkish-flesh tone. Use bright yellow for the entire beak. Finally, color the spiky neck ruff a very light blue or pale grey. This completes your cartoon vulture.
Step 1: Start with the Beak
Begin by drawing the basic, curved shape of the vulture’s beak. This defines the starting point of the head and the direction the bird is looking. Add a small curve on the side for the jawline.
Step 2: Draw the Outline of the Head and Neck
Using a single continuous line, draw the contour of the bald head and the long, thin neck. Start from the top of the beak, curve up for the head, then downwards for the back of the neck, and finally forwards, ending just below the beak.
Step 3: Define the Eye
Add a small circle inside the head shape to position the vulture’s eye.
Step 4: Create the Feathery Neck Ruff
Create the transition between the head and body by drawing a jagged, spiky line that looks like a collar of feathers. This ruff attaches to the base of the neck outline you’ve already created.
Step 5: Sketch the Main Body Contour
From the lower edge of the neck ruff, draw two separate curved lines. One defines the back and the main mass of the body, and the other defines the front chest. Leave gaps for the wing and legs.
Step 6: Outline the Folded Wing
Draw a large, smooth curve inside the body outline to form the main shape of the wing. Then, add a few smaller, wavy, scalloped lines at the bottom of this curve to create the appearance of folded flight feathers.
Step 7: Adding Body Lines
Draw a large curve that connects from the bottom of the neck ruff. This single line creates the belly and forms the main mass of the vulture’s body, merging into the upper chest contour.
Step 8: Drawing the Legs and Talons
From the lower part of the body, draw simple, vertical lines to create the leg stumps. Then, add the detailed, curved lines to form the three toes of each talon, positioned directly below the leg stumps.
Step 9: Creating the Perch
Draw a long, horizontal, cylindrical shape that runs across the entire lower part of the image, appearing below the bird. Ensure the talons are positioned on top of this cylinder, showing the vulture standing firmly on the branch.
Step 10: Complete the Tail
Finish the structural lines of the vulture by extending two angled, straight lines downwards from the body, behind the primary wing, and through the branch to create the tail.
Step 11: Apply Final Colors
The final step is to fill in the colored sections. Make the entire wing, body, and tail a rich, dark brown. Color the bald head and neck a light pinkish-flesh tone. Use bright yellow for the beak. Finally, color the neck ruff light grey, and make the branch and the talons a light tan-brown. This completes your illustration.
Step 1: Drawing the Crown and Brows
Begin by drawing a simple, open curve for the very top of the head. From the ends of this curve, add two smaller, downward-arching curves on each side to establish the top edge of the brows or crest, leaving the bottom of the shape completely open.
Step 2: Forming the Beak and Neck Base
Next, construct the lower part of the head. Draw two curved lines downwards from the existing brows. These lines should then turn inward and meet, creating a larger, pouch-like or keyhole shape. This new contour defines the base for the beak and the start of the neck.
Step 3: Creating the Feathered Ruff
Now, add a textural element below the head. Draw a series of jagged, zig-zag lines that encircle the bottom of the neck. This creates a spiky, fan-like collar of feathers, sitting precisely below the previously drawn head.
Step 4: Defining the Large Body
From the lower edge of the feathered collar, draw a single, large, wide-bottomed oval or U-shape. This contour defines the bird’s massive, rounded body. The bottom edge of this oval should have a small gap.
Step 5: Sketching the Initial Legs
Inside the gap at the bottom of the body shape, draw two simple, curved, leg-like contours. These should be placed near the bottom center of the body oval, standing side-by-side.
Step 6: Adding the Massive Wings
Add the wings. Starting from where the feathered ruff meets the body on each side, draw two large, long-curved shapes that follow the contours of the body and extend downwards. Within each wing shape, add vertical lines to suggest the edges of multiple long, heavy feathers.
Step 7: Detailing the Feet and Claws
Refine the lower legs and add the feet. From the base of the initial leg contours, draw two large, strong feet, each detailed with three prominent, curved, pointed talons, or claws.
Step 8: Positioning the Inner Tail Feathers
Look at the space on the body between the top of the legs. Inside this area, draw two small, distinct, vertically-aligned curves to suggest the initial inner tail feathers.
Step 9: Placing the Eyes
Now, focus on adding the key facial features. Position two large, concentric ovals near the top of the head for the eyes.
Step 10: Finalizing the
Using the guides from the previous step, draw a curved line across the lower eye contours and add pupils. Complete the sharp, curved beak and draw a simple, smiling line below the upper beak shape to complete the expression.
Step 11: Coloring the Vulture
Fill the entire head and the pouch-like neck area with a soft pink. Color the base of the beak orange, while the sharp, downward-pointing tip should be a deep reddish-brown. Leave the jagged feathered collar white. Use a dark charcoal or brownish-grey for the main body and the upper parts of the wings. Apply a slightly lighter shade of grey to the individual long feathers at the bottom of the wings and the tail feathers visible between the legs. Color the strong legs and feet in a solid yellow, keeping the sharp talons white or a very pale cream.
Hopefully, this drawing tutorial on Vulture will help you easily create a nice drawing.
