Wine Glass Drawing Tutorial - How to draw Wine Glass step by step

1. Draw a Wine Glass with Red Wine in Simple Steps

Today, drawing123.com will guide you how to easily draw a wine glass with simple steps.

Let’s get started!

Step 1: Establishing the Rim

Start the drawing by sketching a single, clean ellipse in the upper portion of your drawing area. This simple oval shape will define the rim and opening of the wine glass

Step 2: Forming the Bowl

Building upon the ellipse from the first step, draw two long, outward-curving lines that extend down from the sides of the rim and then curve inward to meet at a bottom center point. This creates the full, rounded shape of the glass bowl.

Step 3: Adding the Stem

From the bottom center point of the bowl, draw two elegant, slightly flared lines descending vertically to form the stem.

Step 4: Sketching the Base Foot

Next, sketch an ellipse at the very bottom of the stem lines. This new oval should be larger and flatter than the one used for the rim.

Step 5: Completing the Base and Main Outline

Connect the bottom of the stem to the sides of the base ellipse with short curves to complete the form. Then, solidify and clean up the entire outline of the glass.

Step 6: Indicating the Liquid Level

To begin adding the wine, draw an inner ellipse inside the bowl to mark the top surface of the liquid. The placement of this ellipse determines how full the glass is

Step 7: Defining the Wine Volume

Add a curved line within the bowl that follows the shape of the lower bowl. This line connects to the ellipse drawn in the previous step, creating a defined volume of liquid inside the glass.

Step 8: Final Coloring

For the final step, color the entire drawing to bring it to life. Use light grey to fill the glass stem, base, and the area of the bowl above the liquid. The wine itself should be colored in two rich tones: use a lighter, more vibrant red for the liquid’s surface and a deeper, darker red for the main volume of the wine

2. Quick Practice Idea to Draw a Wine Glass Smoothly

Step 1: Establishing the Top Rim

Start by drawing a horizontal ellipse near the top center of the canvas. This oval shape serves as the foundation and opening of the wine glass

Step 2: Drawing the Left Profile

Add a continuous line that shapes the left side of the object. This curve begins at the left edge of the initial ellipse, forms the rounded body of the bowl, curves in to create the transition, and then extends straight down to outline the left side of the stem.

Step 3: Completing the Symmetry and Outline

Draw a symmetric curved and straight line on the right side. This line should perfectly mirror the shape from Step 2, completing the body of the bowl and the full vertical stem, leaving the bottom open.

Step 4: Forming the Base

Create the base of the glass by drawing a larger, horizontal ellipse at the very bottom of the stem. This oval should be positioned to anchor the bottom curves of the stem lines, giving the glass its stable foot

Step 5: Defining the Base Edge

To complete the glass structure and add depth, draw an inner, concentric curved line within the larger base ellipse, following its lower curve.

Step 6: Indicating the Liquid Level

Draw a final ellipse inside the main bowl. This oval is smaller and shallower than the initial rim ellipse, serving as the line that defines how full the glass is with liquid.

Step 7: Filling the Wine Glass

Draw a continuous internal line following the inside contour of the bowl, just slightly smaller than the outer glass edge. This line starts and ends where the liquid level ellipse (from Step 6) is drawn, creating a clear container for the wine.

Step 8: Final Coloring

Fill the transparent areas of the glass with light lavender. Color the entire body of the liquid inside the defined area in Step 7 with a solid deep red.

3. Design a Cute Wine Glass Drawing for Kids

Step 1: Draw the top oval for the wine glass

Start by drawing a simple, horizontal oval near the top of your paper. This will form the rim of the wine glass.

Step 2: Form the bowl of the glass

Next, draw two curved lines extending downwards from each side of the oval, making them wider in the middle and then tapering slightly towards the bottom. Join these lines with a gentle curve at the bottom to create the bowl

Step 3: Add detail to the rim

Refine the top by drawing a second, slightly smaller oval inside the first one. Connect the two ovals with small vertical lines, giving the glass rim depth.

Step 4: Draw the liquid inside

Inside the bowl of the glass, draw a wavy line that goes across. Below this line, draw another curved line to form the “pool” of liquid.

Step 5: Give the glass a cute face

Now for the fun part! Inside the liquid area, draw two small circles for eyes and a small, upward-curved line between them for a smile. Add two more tiny circles on each cheek for blush.

Step 6: Create the wavy stem

Extend two curved, slightly wavy lines downwards from the center-bottom of the bowl to create the stem. Make the stem look like it’s slightly wobbly.

Step 7: Add the base of the glass

At the bottom of the stem, draw a flattened oval that connects the two stem lines, forming the foot or base. Add another curved line within the foot to give it a layered, finished look

Step 8: Color the entire drawing

The final step is to fill the character with color. Color the glass itself with a light, cool blue. Fill the liquid with a deep, rich red. Make the cheeks blush a soft, pinkish-red. Give the entire drawing bold, dark black outlines.

4. Make a Toasting Wine Glasses Scene Step by Step

Step 1: Draw the first slanted oval

Start by drawing a tilted oval shape for the rim of the first wine glass, slanted to the left.

Step 2: Form the bowl of the first glass

From the edges of the oval, draw two curved lines downwards that connect to a wider, rounded bottom, creating the body and base of the first glass bowl.

Step 3: Draw a second tilted oval

To the left of the first glass, draw a smaller, narrower oval. This will form part of the second glass’s rim and should be tilted to the right.

Step 4: Outline the second glass’s bowl

Now draw the body of the second glass. Start from the left-hand oval and draw a large, rounded curve that goes behind and connects to the bottom of the first glass bowl, outlining its bowl.

Step 5: Add small bubbles to both bowls

Inside the upper part of each glass bowl, draw a set of two small, nested circles.

Step 6: Draw the liquid line inside the glasses

Inside each glass bowl, draw a wavy, curved line that creates a pool of liquid. This line should be below the small bubble details from the previous step.

Step 7: Sketch the straight stems

Draw two pairs of parallel, straight vertical lines extending downwards from the center-bottom of each glass bowl. These will be the stems of the wine glasses.

Step 8: Create the oval bases

At the bottom of each pair of stem lines, draw a flattened, horizontal oval to complete the base of each wine glass.

Step 9: Color the scene completely

Finally, fill in all the parts of the drawing with color. The liquid inside the glasses and the small bubbles above are colored a vibrant, bright pink. The glass bowls, stems, and bases themselves are filled with a light, cool gray tone. All outlines are dark black.

5. Create Clinking Wine Glasses Drawing for a Fun Celebration Scene

Step 1: Draw the Rims of the Glasses

The process begins with drawing two ovals positioned near the top-center of the frame. These represent the rims of the two wine glasses. The oval on the left tilts slightly downwards and to the right, and the one on the right tilts slightly downwards and to the left, which suggests they will soon be angled towards each other.

Step 2: Draw the Bowls

Starting from the edges of each oval rim, curves descend and then sweep inwards to meet, creating the characteristic rounded shape of a wine glass bowl. Since the rims are tilted inwards, the bottom points of the two bowls also converge, making them appear ready to clink.

Step 3: Draw the Stems

Following the bowls, the stems are added in this step. These are drawn as narrow tubes extending downwards from the center point where the two bowls meet. They flare out slightly towards the bottom, where they will connect to the base.

Step 4: Draw the Bases

The next addition is the flat, circular bases of the wine glasses. These are drawn as two flat ellipses, horizontal to the ground, positioned directly below each flared-out stem, which completes the overall structure of the glasses.

Step 5: Draw the Wine Inside

The liquid level in both glasses is drawn as a gentle, upward-curving line starting from near the bottom-right and sweeping across and up towards the top-left of each bowl. This shape, tilted in the same direction, further emphasizes the movement and angle of the glasses.

Step 6: Add Toasting Sparks

The final detail to create a “cheers” scene is the addition of small sparks. A short burst of small radial lines is drawn from the space where the two rims are closest to each other, indicating a recent, celebratory clink.

Step 7: Apply Final Color

The wine in both glasses is a vibrant, clear pinkish-red, representing the liquid. The glass material itself—the bowls, stems, and bases—is a cool, pale, light-blue hue, which gives it a slight tint of transparency. The sparks remain uncolored and just black lines, and the background is a solid white.

6. Step-by-Step Guide to Drawing a Cracked Wine Glass

Step 1: Laying the Foundation

Start by drawing a single horizontal oval shape near the top of your drawing area. This will serve as the rim of the wine glass and acts as your initial structural guide

Step 2: Defining the Bowl

Using the top rim from Step 1 as a guide, draw the main body or bowl of the wine glass. Extend lines down from the sides of the oval, curving them inwards to create the rounded shape of the bowl, tapering at the bottom

Step 3: Drawing the Stem

From the center of the bottom of the bowl you just drew, draw two long, parallel vertical lines extending downwards. These will form the slender stem of the glass.

Step 4: Adding the Base, First Pass

Next, you will add the base for the glass to stand on. Draw a single oval shape directly beneath the bottom end of the stem. This oval should be positioned horizontally and be slightly wider than the bottom of the stem, illustrating the initial pass at a base

Step 5: Completing the Structure

Refine the base of your glass for a complete look. Draw another oval curve just below and slightly overlapping with the previous oval you drew in Step 4. This second line creates the thickness and flat edge of the glass base, finalizing the structure

Step 6: Cracking the Glass

Now comes the crucial step of adding the damage. Starting from the top rim, draw several sharp, jagged lines that splinter and branch downwards onto the main surface of the glass bowl. Make the lines vary in length and angle to depict a realistic, multi-point crack

Step 7: Final Touches and Coloring

The structure is complete, and the final step is adding color. To make the glass appear realistic and clear, shade the entire structure with a very pale, light blue color. This subtle hue makes the white background look transparent through the glass, while the original white lines remain distinct against the pale color.