You can choose your favorite images to see detail drawing instructions:
You can choose your favorite images to see detail drawing instructions:
Today, drawing123.com will guide you how to easily draw a yoyo with simple steps.
Let’s get started!
Step 1: Start with the Outer Circle
Begin by drawing a single circle slightly off-center to the right.
Step 2: Define the Face and Form
Draw a second, smaller circle inside the first one. Connect these two circles to the left with another larger, rounded curve to establish the three-dimensional body of the yoyo.
Step 3: Add the Star Detail
Draw a five-pointed star in the very center of the inner circle.
Step 4: Sketch the Side Profile Line
Add a small curve on the outer left edge of the main body to better define the side rim of the yoyo.
Step 5: Complete the Side and Grooves
Draw another curved line inside the left section to represent the deep groove where the string will be wound.
Step 6: Draw the Complete String
Draw the string. Start it from within the side groove, looping it high and to the left, and then down, adding a loop at the bottom for the finger.
Step 7: Apply Final Colors and Outline
Cover all lines with a black outline. Color the main body rim a vibrant red. Make the inner face a bright yellow, and color the central star a solid green. The string should be a simple gray.
Step 1: Start with the Top Disc Rim
Begin by drawing an elongated oval in the upper portion of your drawing area. This sets the initial top perspective for the yoyo.
Step 2: Define the Top Disc and Face
Draw a larger, concentric oval around the first one to create the rim thickness. Then, inside the original oval, draw a slightly smaller oval to define the central face area of the top disc.
Step 3: Establish the Center Axis
Add a small, single oval in the very center of the top disc face to mark the point where the yoyo’s axle is located.
Step 4: Sketch the Lower Half’s Initial Rim
Below the first completed disc, draw a new oval that represents the top edge of the second, lower disc.
Step 5: Define the Full Lower Half and Hub
Add an additional concentric oval to define the thickness of the lower disc. Also, connect the center area of the top disc to the center area of the lower disc with two slightly curved vertical lines, forming the central hub.
Step 6: Draw the String
Draw the string by creating two parallel wavy lines starting from the central hub and leading out, forming a loose loop with a single curl at the end.
Step 7: Finalize with Color and Outlines
Bolden all lines with a black outline. Fill the large, top and bottom flat faces with a bright blue color. Color the smaller, inner axle area and the curved sides of both discs with an orange hue. The string should be colored light gray.
Step 1: The Initial Shape
Begin the drawing by creating the foundation of the yoyo’s body. Draw a single, vertical oval shape in the upper center of your drawing area. This is the first of two main circular sides.
Step 2: Defining the First Side
Add a second curve that mimics the right side of the initial oval, but is offset slightly to the right. This creates the three-dimensional thickness of the front side of the yoyo, making it look like a disk.
Step 3: Creating the First Spacer
Draw a smaller, half-circle curve on the right-hand side, attaching it to the inner curve you created in the previous step. This is the first edge of the spacer between the two yoyo sides.
Step 4: Defining the Second Side
Repeat the shape of the main oval (from Step 1) on the far right. Place this oval slightly behind and to the right of the first disk, leaving a clear gap, and make sure it aligns with the spacer from the previous step.
Step 5: Defining the Second Spacer
Draw another smaller, vertical half-circle to connect the inner curve of the second side disk to the first spacer. This completes the center connecting part of the yoyo.
Step 6: Adding Concentric Details
Return to the first, primary oval (the front face of the yoyo) and draw two smaller, concentric ovals inside it. This creates a central medallion or ring pattern.
Step 7: The Star Emblem
Draw a simple five-pointed star in the very center of the ovals you just added on the yoyo’s front face. The star should have rounded points for a playful look.
Step 8: Adding the String
Start from the bottom center of the yoyo’s axle (between the two disks) and draw a wavy, loosely coiled line that descends and curls. This forms the yoyo string. The main outline drawing of the yoyo is now complete.
Step 9: Final Coloring
Fill the surfaces of both yoyo disks with bright cyan blue. Color the innermost part of the front oval, surrounding the star, with a vibrant red. Make the five-pointed star bright green. Fill the concentric rings around the central red area with golden yellow. Fill the empty space between the two disks with solid black, and use the same black for the small inner spacer parts. Fill the yoyo string with a solid medium gray color.
Step 1: The First Circle
Draw a single, smooth circle to represent the basic outer profile of the yoyo’s main body. Position it in the upper-right of your drawing area.
Step 2: The Inner Rim
Draw a second, slightly smaller concentric circle inside the first one. This will define the front face and its rim.
Step 3: Developing Depth
At the back edge (left side) of the main circles, draw a small, half-circle curve to connect the inner rim to the back face, indicating the yoyo’s thickness.
Step 4: Establishing the Back Face
Continuing from the depth lines, draw a larger, full circular curve behind the main body to establish the complete back face of the yoyo.
Step 5: Adding the String
Draw the yoyo string coming down from the center bottom of the yoyo’s axle gap. At the end, draw a small loop shape.
Step 6: The Flower Medallion
Inside the inner rim of the main front body, draw a simple six-petaled flower design at the center of the medallion.
Step 7: Adding the Flower Center
Complete the flower by adding a small circle in the very center. Your clean line work is now finished.
Step 8: Final Coloring
Now, bring the yoyo to life with vibrant colors. Color the main yoyo body (the front rim and the back face) with a bright purple. The inner medallion face, around the flower, is filled with a lively green. The six-petaled flower itself is colored purple. The central small circle within the flower is bright yellow. Finally, color the yoyo string and its loop a cheerful yellow.
Hopefully, this drawing tutorial on Yoyo will help you easily create a nice drawing.
